Microtecnic
Author:
Publisher:
Published: 1976
Total Pages: 548
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author:
Publisher: Research Publishing Service
Published: 2011
Total Pages: 64
ISBN-13: 9810865554
DOWNLOAD EBOOKAuthor: Volker Hessel
Publisher: John Wiley & Sons
Published: 2006-03-06
Total Pages: 712
ISBN-13: 3527605371
DOWNLOAD EBOOKMicro process engineering is approaching both academia and industry. With the provision of micro devices and systems by commercial suppliers, one main barrier for using these units has been eliminated. More and more they become familiar, thereby being one facet of the upheaval in chemical industry. This book focuses on processes rather than on devices: what is 'before' and 'behind' micro device fabrication. A comprehensive and detailed overview is given on: - A multi-faceted, hierarchic analysis of chemical micro process technology - Modelling and simulation of micro reactors - Liquid- and liquid/liquid-phase reactions - Gas/liquid reactions - Gas-phase reactions (heterogeneous catalysis)
Author: Yoshinobu Baba
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 416
ISBN-13: 9401005044
DOWNLOAD EBOOKThe Sixth International Conference on Miniaturized Chemical and Biochemical Analysis Systems, known as IlTAS2002, will be fully dedicated to the latest scientific and technological developments in the field of miniaturized devices and systems for realizing not only chemical and biochemical analysis but also synthesis. The first IlTAS meeting was held in Enschede in 1994 with approximately 160 participants, bringing together the scientists with background in analytical and biochemistry with those with Micro Electro Mechanical Systems (MEMS) in one workshop. We are grateful to Piet Bergveld and Albert van den Berg of MESA Research Institute of the University of Twente for their great efforts to arrange this exciting first meeting. The policy of the meeting was succeeded by late Prof. Dr. Michael Widmer in the second meeting, IlTAS'96 held in Basel with 275 participants. The first two meetings were held as informal workshops. From the third workshop, IlTAS'98 (420 participants) held in Banff, the workshop had become a worldwide conference. Participants continued to increase in IlTAS2000 (about 500 participants) held in Enschede and IlTAS2001 (about 700 participants) held in Monterey. The number of submitted papers also dramatically increased in this period from 130 in 1998, 230 in 2000 to nearly 400 in 2001. From 2001, IlTAS became an annual symposium. The steering committee meeting held in Monterey, confirmed the policy of former IlTAS that quality rather than quantity would be the key-point and that the parallel-session format throughout the 3.
Author: David Tolfree
Publisher: CRC Press
Published: 2007-11-19
Total Pages: 255
ISBN-13: 1040167942
DOWNLOAD EBOOKMicro-nanotechnologies (MNT) are already making a profound impact on our daily lives. New applications are well underway in the US, Asia, and Europe. However, their potentially disruptive nature, along with the public's concerns, has produced a number of challenges. Commercializing Micro-Nanotechnology Products provides a snapshot of the cur
Author: Hans Nørgaard Hansen
Publisher: MDPI
Published: 2018-07-03
Total Pages: 191
ISBN-13: 3038426040
DOWNLOAD EBOOKThis book is a printed edition of the Special Issue "Micro/Nano Manufacturing" that was published in Micromachines
Author: Joachim Frühauf
Publisher: Springer Science & Business Media
Published: 2005-12-05
Total Pages: 229
ISBN-13: 3540268766
DOWNLOAD EBOOKThis methodic manual presents a survey of the form-related and functional elements of the bulk silicon microtechnique. It gives a systematic description of simple shape elements and of elements for mechanical, fluidic and optical applications. This manual includes practical instructions for the use of the relevant techniques and an extensive collection of examples for the support of the search for applications via photographs, drawings and references. It serves as a valuable guide to the design of etch masks and processes while summarizing the important properties of silicon, especially aiming at producers of sensors and microtechnical components, as well as producers of components of precision engineering and optical applications.
Author: Wolfgang Göpel
Publisher: John Wiley & Sons
Published: 2008-07-11
Total Pages: 579
ISBN-13: 3527620613
DOWNLOAD EBOOKSensors is the first self-contained series to deal with the whole area of sensors. It describes general aspects, technical and physical fundamentals, construction, function, applications and developments of the various types of sensors. This final volume of the series uncovers trends in sensor technology and gives a comprehensive overview of the sensor market. The use of sensors in microsystems and in vacuum microelectronic as well as in acoustic wave devices is discussed. Present and emerging applications of sensors in aerospace, environmental, automotive, and medical industries, among others, are described. This volume is an indispensable reference work for both specialists and newcomers, researchers and developers
Author: Sandra Koelemeijer
Publisher: Springer
Published: 2008-03-12
Total Pages: 400
ISBN-13: 038777405X
DOWNLOAD EBOOKMicro-assembly is a key enabling technology for cost effective manufacture of new generations of complex micro products. It is also a critical technology for retaining mdustrial capabilities in high labour cost areas such as Europe since up to 80% of the production cost in some industries is attributed directly to assembly processes. With the continuous trend for product miniaturisation, the scientific and technologi cal developments in micro-assembly are expected to have a significant long-term economic, demographic and social impact. A distinctive feature of the process is that surface forces are often dominant over gravity forces, which determines a number of specific technical challenges. Critical areas which are currently being addressed include development of assembly systems with high positional accuracy, micro gripping methods that take into ac count the adhesive surface forces, high precision micro-feeding techniques and mi cro-joining processes. Micro-assembly has developed rapidly over the last few years and all the pre dictions are that it will remain a critical technology for high value products in a number of key sectors such as healthcare, communications, defence and aerospace. The key challenge is to match the significant technological developments with a new generation of micro products that will establish firmly micro-assembly as a core manufacturing process.
Author: Bharat Bhushan
Publisher: CRC Press
Published: 2020-10-28
Total Pages: 884
ISBN-13: 9781420050493
DOWNLOAD EBOOKThis second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices