Lyapunov-based Fault Tolerant Control of Quadrotor Unmanned Aerial Vehicles
Lyapunov-based Fault Tolerant Control of Quadrotor Unmanned Aerial Vehicles

Author: Xiaobing Zhang

Publisher:

Published: 2010

Total Pages: 0

ISBN-13:

DOWNLOAD EBOOK

This thesis presents the theoretical development, simulation study and flight tests of a Lyapunov-based control approach for the Fault Tolerant Control (FTC) of a quadrotor unmanned aerial vehicle (UAV). Based on the derivation of nonlinear model of the dynamics of the quadrotor UAV, a Lyapunov-based control approach with fixed controller gains is proposed and firstly demonstrated through simulations of the quadrotor UAV for handling system parameter uncertainties. Secondly, this proposed Lyapunov-based approach with the selected controller gains is applied as a fault tolerant controller in the framework of a passive Fault Tolerant Control System (FTCS), for handling less severe faults occurring in the quadrotor UAV. Thirdly, the proposed new controller by Lyapunov-based adaptive control method for fault tolerant control of the quadrotor UAV is proposed to handle more severe faults. Finally, the Lyapunov-based control method has been implemented to the test bed, Qball-X4 Unmanned Aerial Vehicle, and the acceptable performances on altitude control have been achieved. In the thesis, simulation and flight testing results demonstrate that the FTCS with the Lyapunov-based approach has certain robustness for most of partial losses. However, the FTCS with Lyapunov-based adaptive control approach has advantages in accommodating more severe faults for, which may not be addressed by the Lyapunov-based approach.

Fault-Tolerant Cooperative Control of Unmanned Aerial Vehicles
Fault-Tolerant Cooperative Control of Unmanned Aerial Vehicles

Author: Ziquan Yu

Publisher: Springer Nature

Published: 2023-12-06

Total Pages: 226

ISBN-13: 9819976618

DOWNLOAD EBOOK

This book focuses on the fault-tolerant cooperative control (FTCC) of multiple unmanned aerial vehicles (multi-UAVs). It provides systematic and comprehensive descriptions of FTCC issues in multi-UAVs concerning faults, external disturbances, strongly unknown nonlinearities, and input saturation. Further, it addresses FTCC design from longitudinal motions to attitude motions, and outer-loop position motions of multi-UAVs. The book’s detailed control schemes can be used to enhance the flight safety of multi-UAVs. As such, the book offers readers an in-depth understanding of UAV safety in cooperative/formation flight and corresponding design methods. The FTCC methods presented here can also provide guidelines for engineers to improve the safety of aerospace engineering systems. The book offers a valuable asset for scientists and researchers, aerospace engineers, control engineers, lecturers and teachers, and graduates and undergraduates in the system and control community, especially those working in the field of UAV cooperation and multi-agent systems.

Nonlinear and Fault-tolerant Control Techniques for a Quadrotor Unmanned Aerial Vehicle
Nonlinear and Fault-tolerant Control Techniques for a Quadrotor Unmanned Aerial Vehicle

Author: Tong Li

Publisher:

Published: 2011

Total Pages: 176

ISBN-13:

DOWNLOAD EBOOK

Unmanned Aerial Vehicles (UAVs) have become more and more popular, and how to control them has become crucial. Although there are many different control methods that can be applied to the control of UAVs, nonlinear control techniques are more practical since the nonlinear features of most UAVs. In this thesis, as the first main contribution, three widely used nonlinear control techniques including Feedback Linearization Control (FLC), Sliding Mode Control (SMC), and Backstepping Control (BSC) are discussed, investigated, and designed in details and flight-tested on a unique quadrotor UAV (Qball-X4) test-bed available at the Networked Autonomous Vehicles (NAV) Lab in Concordia University. Each of these three control algorithms has its own features. The advantages and disadvantages are revealed through both simulation and experimental tests. Sliding mode control is well known for its capability of handling uncertainty, and is expected to be a robust controller on Qball-X4 UAV. Feedback linearization control and backstepping control are considered a bit weaker than sliding mode control. A comparison of these three controllers is carried out in both theoretical analysis and experimental results under same fault-free flight conditions. Testing results and comparison show the different features of different control methods, and provide a view on how to choose controller under a specific condition. Besides, safety and reliability of UAVs have been and will always be a critical issue in the aviation industry. Fault-Tolerant Control (FTC) has played an extremely important role towards UAVs' safety and reliability and the safety of group people if an unexpected crash occurred due to faults/damages of UAVs. Therefore, FTC has been a very active and quickly growing research and development field for UAVs and other safety-critical systems. Based on the use of sliding mode control technique, referred to as Fault-Tolerant SMC (FT-SMC) have been investigated, implemented, flight-tested and compared in the Qball-X4 test-bed and also simulation environment in both passive and active framework of FTC in the presence of different actuator faults/damages, as the second main contribution of this thesis work.

Refined Safety Control of Unmanned Flight Vehicles via Fractional-Order Calculus
Refined Safety Control of Unmanned Flight Vehicles via Fractional-Order Calculus

Author: Ziquan Yu

Publisher: CRC Press

Published: 2023-02-03

Total Pages: 249

ISBN-13: 100383759X

DOWNLOAD EBOOK

The monograph explores the safety of unmanned flight vehicles via the corresponding fault-tolerant control design methods. The authors analyse the safety control issues of unmanned flight vehicles, which include finite-time recovery against faults, concurrence of actuator faults and sensor faults, concurrence of actuator faults and wind effects, and faults encountered by a portion of unmanned flight vehicles in a distributed communication network. In addition, the commonly used simple but effective proportional-integral-derivative structure is also incorporated into the safety control design for unmanned flight vehicles. By using the fractional-order calculus, the developed safety control results are able to ensure flight safety and achieve the refined performance adjustments against faults and wind effects. The book will be of interest to 3rd/4th year undergraduate students, postgraduate and graduate students, researchers, academic staff, engineers of aircraft and unmanned flight vehicles.

Autonomous Safety Control of Flight Vehicles
Autonomous Safety Control of Flight Vehicles

Author: Xiang Yu

Publisher: CRC Press

Published: 2021-02-12

Total Pages: 143

ISBN-13: 1000346161

DOWNLOAD EBOOK

Aerospace vehicles are by their very nature a crucial environment for safety-critical systems. By virtue of an effective safety control system, the aerospace vehicle can maintain high performance despite the risk of component malfunction and multiple disturbances, thereby enhancing aircraft safety and the probability of success for a mission. Autonomous Safety Control of Flight Vehicles presents a systematic methodology for improving the safety of aerospace vehicles in the face of the following occurrences: a loss of control effectiveness of actuators and control surface impairments; the disturbance of observer-based control against multiple disturbances; actuator faults and model uncertainties in hypersonic gliding vehicles; and faults arising from actuator faults and sensor faults. Several fundamental issues related to safety are explicitly analyzed according to aerospace engineering system characteristics; while focusing on these safety issues, the safety control design problems of aircraft are studied and elaborated on in detail using systematic design methods. The research results illustrate the superiority of the safety control approaches put forward. The expected reader group for this book includes undergraduate and graduate students but also industry practitioners and researchers. About the Authors: Xiang Yu is a Professor with the School of Automation Science and Electrical Engineering, Beihang University, Beijing, China. His research interests include safety control of aerospace engineering systems, guidance, navigation, and control of unmanned aerial vehicles. Lei Guo, appointed as "Chang Jiang Scholar Chair Professor", is a Professor with the School of Automation Science and Electrical Engineering, Beihang University, Beijing, China. His research interests include anti-disturbance control and filtering, stochastic control, and fault detection with their applications to aerospace systems. Youmin Zhang is a Professor in the Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, Montreal, Québec, Canada. His research interests include fault diagnosis and fault-tolerant control, and cooperative guidance, navigation, and control (GNC) of unmanned aerial/space/ground/surface vehicles. Jin Jiang is a Professor in the Department of Electrical & Computer Engineering, Western University, London, Ontario, Canada. His research interests include fault-tolerant control of safety-critical systems, advanced control of power plants containing non-traditional energy resources, and instrumentation and control for nuclear power plants.

Fault-tolerant Flight Control and Guidance Systems
Fault-tolerant Flight Control and Guidance Systems

Author: Guillaume J. J. Ducard

Publisher: Springer Science & Business Media

Published: 2009-05-14

Total Pages: 268

ISBN-13: 1848825617

DOWNLOAD EBOOK

This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.

Diagnostic and Fault-tolerant Control Applied to an Unmanned Aerial Vehicle
Diagnostic and Fault-tolerant Control Applied to an Unmanned Aerial Vehicle

Author: Abdel-Razzak Merheb

Publisher:

Published: 2016

Total Pages: 183

ISBN-13:

DOWNLOAD EBOOK

Unmanned Aerial Vehicles (UAV) are more and more popular for their civil and military applications. Classical control laws usually show weaknesses in the presence of parameter uncertainties, environmental disturbances, and actuator and sensor faults. Therefore, it is judicious to design a control law capable of stabilizing the UAV not only in the fault-free nominal cases, but also in the presence of disturbances and faults. In this thesis, a new bio-inspired search algorithm called Ecological Systems Algorithm (ESA) suitable for engineering optimization problems is developed. The algorithm is used over the thesis to find optimal gains for the fault tolerant controllers. Sliding Mode Control theory is used to develop two Passive Fault Tolerant Controllers for quadrotor UAVs: Regular and Cascaded SMC. Because Passive Controllers handle a few numbers of faults, an Active Sliding Mode Fault Tolerant Controller using Kalman Filter is developed. To overcome severe faults and failures, an emergency controller based on the Quadrotor-to-Trirotor conversion maneuver is developed. The Controllers developed so far (Passive, Active, and emergency controllers) are then integrated to form the Integrated Fault Tolerant Controller (IFTC). The IFTC is a powerful controller that is able to handle a wide number of faults, and save actuator resources as well as processor computational effort. Finally, Passive and Active Fault Tolerant Controllers are designed for octorotor UAVs based on First Order and Second Order Sliding Mode Control. The AFTC uses Dynamic and Pseudo-Inverse Control Allocation methods to redistribute the control effort among healthy actuators reducing the effect of fault.

Fault Diagnosis and Fault-tolerant Control of Quadrotor UAVs
Fault Diagnosis and Fault-tolerant Control of Quadrotor UAVs

Author: Remus C. Avram

Publisher:

Published: 2016

Total Pages: 125

ISBN-13:

DOWNLOAD EBOOK

Quadrotors represent a special class of Unmanned Aerial Vehicles (UAVs) and have attracted significant attention in recent years due to their potential in various military and civilian applications. However, due to their intrinsic fabrication process and component damage, quadrotors are prone to various type of faults. This dissertation presents the design, analysis, and experimental implementation of fault diagnosis, fault-tolerant control, and controller verification methods to achieve safety assurance and trusted autonomy of quadrotor UAVs. First, the issue of sensor faults is investigated under two different scenarios: (1) the case when all Euler angles are available for measurement; (2) the case when roll and pitch angles are not measurable and need to be estimated. Nonlinear adaptive estimators are designed to provide possible simultaneous accelerometer and gyroscope fault detection, isolation, and bias estimation. Next, the issue of fault-tolerant control of quadrotor UAV in the presence of actuator faults is considered. First, the design of an integrated fault diagnosis and accommodation scheme is investigated. Nonlinear adaptive thresholds are designed to improve the robustness of the fault detection and isolation algorithm. The fault diagnostic information is used for accommodating the effect of the faults. Second, a nonlinear adaptive fault-tolerant altitude and attitude controller is developed to automatically stabilize and recover tracking performance of the quadrotor, even in the presence of possible multiple simultaneous actuator faults. Compared with the first approach, the adaptive control framework is able to automatically accommodate the effects of actuator faults without the need of a fault diagnosis mechanism. Finally, a run-time assurance architecture is investigated for the verification and validation of the adaptive fault-tolerant altitude attitude controller. The algorithms are presented with a rigorous framework aimed at characterizing their performance properties. The above algorithms are implemented and evaluated using a real-time indoor quadrotor test environment. Experimental flight test results are shown to illustrate the effectiveness of the proposed methods.

Fault Tolerant Flight Control of Unmanned Aerial Vehicles
Fault Tolerant Flight Control of Unmanned Aerial Vehicles

Author: Iman Sadeghzadeh

Publisher:

Published: 2015

Total Pages: 138

ISBN-13:

DOWNLOAD EBOOK

Safety, reliability and acceptable level of performance of dynamic control systems are the major keys in all control systems especially in safety-critical control systems. A controller should be capable of handling noises and uncertainties imposed to the controlled process. A fault-tolerant controller should be able to control a system with guaranteed stability and good or acceptable performance not only in normal operation conditions but also in the presence of partial faults or total failures that can be occurred in the components of the system. When a fault occurs in a system, it suddenly starts to behave in an unanticipated manner. Thereby, a fault-tolerant controller should be designed for being able to handle the fault and guarantee system stability and acceptable performance in the presence of faults/damages. This shows the importance and necessity of Fault-Tolerant Control (FTC) to safety-critical and even nowadays for some new and non-safety-critical systems. During recent years, Unmanned Aerial Vehicles (UAVs) have proved to play a significant role in military and civil applications. The success of UAVs in different missions guarantees the growing number of UAVs to be considerable in future. Reliability of UAVs and their components against faults and failures is one of the most important objectives for safety-critical systems including manned airplanes and UAVs. The reliability importance of UAVs is implied in the acknowledgement of the Office of the Secretary of Defense in the UAV Roadmap 2005-2030 by stating that, ?Improving UA [unmanned aircraft] reliability is the single most immediate and long-reaching need to ensure their success?. This statement gives a wide future scenery of safety, reliability and Fault-Tolerant Flight Control (FTFC) systems of UAVs. The main objective of this thesis is to investigate and compare some aspects of fault tolerant flight control techniques such as performance, robustness and capability of handling the faults and failures during the flight of UAVs. Several control techniques have been developed and tested on two main platforms at Concordia University for fault-tolerant control techniques development, implementation and flight test purposes: quadrotor and fixedwing UAVs. The FTC techniques developed are: Gain-Scheduled Proportional-Integral-Derivative (GS-PID), Control Allocation and Re-allocation (CA/RA), Model Reference Adaptive Control (MRAC), and finally the Linear Parameter Varying (LPV) control as an alternative and theoretically more comprehensive gain scheduling based control technique. The LPV technique is used to control the quadrotor helicopter for fault-free conditions. Also a GS-PID controller is used as a fault-tolerant controller and implemented on a fixedwing UAV in the presence of a stuck rudder failure case.

Advanced Robust Nonlinear Control Approaches for Quadrotor Unmanned Aerial Vehicle
Advanced Robust Nonlinear Control Approaches for Quadrotor Unmanned Aerial Vehicle

Author: Moussa Labbadi

Publisher: Springer Nature

Published: 2021-09-14

Total Pages: 263

ISBN-13: 3030810143

DOWNLOAD EBOOK

This book studies selected advanced flight control schemes for an uncertain quadrotor unmanned aerial vehicle (UAV) systems in the presence of constant external disturbances, parametric uncertainties, measurement noise, time-varying external disturbances, and random external disturbances. Furthermore, in all the control techniques proposed in this book, it includes the simulation results with comparison to other nonlinear control schemes recently developed for the tracking control of a quadrotor UAV. The main contributions of the present book for quadrotor UAV systems are as follows: (i) the proposed control methods are based on the high-order sliding mode controller (SMC) and hybrid control algorithm with an optimization method. (ii) the finite-time control schemes are developed by using fast terminal SMC (FTSMC), nonsingular FTSMC (NFTSMC), global time-varying SMC, and adaptive laws. (iii) the fractional-order flight control schemes are developed by using the fractional-order calculus theory, super twisting algorithm, NFTSMC, and the SMC. This book covers the research history and importance of quadrotor system subject to system uncertainties, external wind disturbances, and noise measurements, as well as the research status of advanced flight control methods, adaptive flight control methods, and flight control based on fractional-order theory. The book would be interesting to most academic undergraduate, postgraduates, researchers on flight control for drones and applications of advanced controllers in engineering field. This book presents a must-survey for advanced finite-time control for quadrotor system. Some parts of this book have the potential of becoming the courses for the modelling and control of autonomous flying machines. Readers (academic researcher, undergraduate student, postgraduate student, MBA/executive, and education practitioner) interested in nonlinear control methods find this book an investigation. This book can be used as a good reference for the academic research on the control theory, drones, terminal sliding mode control, and related to this or used in Ph.D. study of control theory and their application in field engineering.