Traffic Controls for Construction and Maintenance Work Zones: Field function
Traffic Controls for Construction and Maintenance Work Zones: Field function

Author: American Public Works Association

Publisher:

Published: 1977

Total Pages: 76

ISBN-13:

DOWNLOAD EBOOK

Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.

Traffic Controls for Construction and Maintenance Work Zones: Office function
Traffic Controls for Construction and Maintenance Work Zones: Office function

Author: American Public Works Association

Publisher:

Published: 1977

Total Pages: 128

ISBN-13:

DOWNLOAD EBOOK

Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.

Roadside Design Guide
Roadside Design Guide

Author: American Association of State Highway and Transportation Officials. Task Force for Roadside Safety

Publisher:

Published: 1989

Total Pages: 560

ISBN-13:

DOWNLOAD EBOOK

Sulphur Extended Asphalt (SEA)
Sulphur Extended Asphalt (SEA)

Author: Bob M. Gallaway

Publisher:

Published: 1977

Total Pages: 80

ISBN-13:

DOWNLOAD EBOOK

This report deals with pavement mixture designs and construction operation of field trials on U.S. 69 north of Lufkin, Texas. The binders used in this field trial consisted of pure asphalt cement for the control sections and 30/70 weight percent of a sulphur/asphalt emulsion as the test binder. All elements of the structural (thickness) design were produced in pairs for comparison purposes with the exception of two thinner sections selected to possibly show distress in two or three years. Otherwise, the thickness designs used in the test sections were those specified by the State Department of Highways and Public Transportation in the conventional section of this highway. Preconstruction laboratory evaluations of mixture properties and field laboratory control measurements are included as a part of this report.

Guidelines for Cone Penetration Test
Guidelines for Cone Penetration Test

Author: United States. Federal Highway Administration. Implementation Division

Publisher:

Published: 1977

Total Pages: 164

ISBN-13:

DOWNLOAD EBOOK

This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.