The Application of High Pressure in Metal-deformation Processing
The Application of High Pressure in Metal-deformation Processing

Author: F. W. Boulger

Publisher:

Published: 1964

Total Pages: 82

ISBN-13:

DOWNLOAD EBOOK

On October 3, 1963, a symposium was sponsored by the Bureau of Naval Weapons, Metalworking Processes and Equipment Program, on the application of high pressure in metal-deformation processing. Past research has shown that superimposed hydrostatic pressure can significantly increase the ductility at fracture of various materials. These observations have stimulated considerable interest in applying this hydrostatic-pressure effect to metal deformation processing, where it was anticipated that improved ductility and fabricability of brittle materials could be realized. Hydrostatic extrusion and hydrodynamic compressive forging were two such fabrication techniques discussed at the symposium, and preliminary results were found to be encouraging. Another fabrication process that will be investigated in the near future is sheet drawing, where the effect of superimposed pressure improves the ductility to fracture, it was noted that pressure cycling did not improve either the strength or ductility of steels containing various amounts of carbon. In addition to the mechanical-property effects, hydrostatic pressure has been found to affect measurably, numerous metallurgical properties of metals and alloys. (Author).

Nanostructured Materials by High-Pressure Severe Plastic Deformation
Nanostructured Materials by High-Pressure Severe Plastic Deformation

Author: Yuntian T. Zhu

Publisher: Springer Science & Business Media

Published: 2006-01-20

Total Pages: 310

ISBN-13: 1402039239

DOWNLOAD EBOOK

Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

Metal Deformation Processing
Metal Deformation Processing

Author: F. W. Boulger

Publisher:

Published: 1967

Total Pages: 174

ISBN-13:

DOWNLOAD EBOOK

As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. The report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Ductile Fracture; Application of High Pressure to the Forming of Brittle Metals; Superplasticity; Lubrication in Metal-Deformation Processes; Swaging; Adiabatic Conditions in Deformation Processing; Residual Stresses produced by Deformation. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Metal Deformation Processing
Metal Deformation Processing

Author: F. W. Boulger

Publisher:

Published: 1964

Total Pages: 140

ISBN-13:

DOWNLOAD EBOOK

As part of the Metalworking Process and Equipment Program, a survey was conducted to collect and summarize information on deformation characteristics of metals and their effect on processing operations. This report presents information obtained from reports on Governmentsponsored work and from articles in technical publications. The report covers eight subjects: extrusion, forging, rolling, thermal mechanical variables affecting the properties of refractory metals and alloys, development of preferred orientations, anisotropy of strength and ductility, high-strain-rate deformation, and strain aging. In order to be useful to engineering students and production engineers the topics are treated in two ways. Generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily. When practical, data on the more-difficultto-form metals are used to illustrate the principles, limitations, and effects of the processes. The objective is to help the non-specialist recognize the implications of specific findings and to apply them to specific operations. (Author).

Mechanical Properties and Working of Metals and Alloys
Mechanical Properties and Working of Metals and Alloys

Author: Amit Bhaduri

Publisher: Springer

Published: 2018-05-12

Total Pages: 758

ISBN-13: 9811072094

DOWNLOAD EBOOK

This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.