Production Planning with Capacitated Resources and Congestion
Production Planning with Capacitated Resources and Congestion

Author: Hubert Missbauer

Publisher: Springer Nature

Published: 2020-02-26

Total Pages: 289

ISBN-13: 107160354X

DOWNLOAD EBOOK

This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.

Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action
Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action

Author: Duck Young Kim

Publisher: Springer Nature

Published: 2022-09-18

Total Pages: 624

ISBN-13: 3031164075

DOWNLOAD EBOOK

This two-volume set, IFIP AICT 663 and 664, constitutes the thoroughly refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2022, held in Gyeongju, South Korea in September 2022. The 139 full papers presented in these volumes were carefully reviewed and selected from a total of 153 submissions. The papers of APMS 2022 are organized into two parts. The topics of special interest in the first part included: AI & Data-driven Production Management; Smart Manufacturing & Industry 4.0; Simulation & Model-driven Production Management; Service Systems Design, Engineering & Management; Industrial Digital Transformation; Sustainable Production Management; and Digital Supply Networks. The second part included the following subjects: Development of Circular Business Solutions and Product-Service Systems through Digital Twins; “Farm-to-Fork” Production Management in Food Supply Chains; Urban Mobility and City Logistics; Digital Transformation Approaches in Production Management; Smart Supply Chain and Production in Society 5.0 Era; Service and Operations Management in the Context of Digitally-enabled Product-Service Systems; Sustainable and Digital Servitization; Manufacturing Models and Practices for Eco-Efficient, Circular and Regenerative Industrial Systems; Cognitive and Autonomous AI in Manufacturing and Supply Chains; Operators 4.0 and Human-Technology Integration in Smart Manufacturing and Logistics Environments; Cyber-Physical Systems for Smart Assembly and Logistics in Automotive Industry; and Trends, Challenges and Applications of Digital Lean Paradigm.

Decision Policies for Production Networks
Decision Policies for Production Networks

Author: Dieter Armbruster

Publisher: Springer Science & Business Media

Published: 2012-03-05

Total Pages: 308

ISBN-13: 0857296442

DOWNLOAD EBOOK

The financial results of any manufacturing company can be dramatically impacted by the repetitive decisions required to control a complex production network be it a network of machines in a factory; a network of factories in a company; or a network of companies in a supply chain. Decision Policies for Production Networks presents recent convergent research on developing policies for operating production networks including details of practical control and decision techniques which can be applied to improve the effectiveness and economic efficiency of production networks worldwide. Researchers and practitioners come together to explore a wide variety of approaches to a range of topics including: WIP and equipment management policies, Material release policies, Machine, factory, and supply chain network policies for delivery in the face of supply and demand variability, and Conflicts between complex production network models and their controlling policies. Case studies and relevant mathematical techniques are included to support and explain techniques such as heuristics, global and hierarchical optimization, control theory and filtering approaches related to complex systems or traffic flows. Decision Policies for Production Networks acts as handbook for researchers and practitioners alike, providing findings and information which can be applied to develop methods and advance further research across production networks.

Essays in Production, Project Planning and Scheduling
Essays in Production, Project Planning and Scheduling

Author: P. Simin Pulat

Publisher: Springer Science & Business Media

Published: 2013-12-02

Total Pages: 419

ISBN-13: 1461490561

DOWNLOAD EBOOK

From the Preface: This festschrift is devoted to recognize the career of a man who not only witnessed the growth of operations research from its inception, but also contributed significantly to this growth. Dr. Salah E. Elmaghraby received his doctorate degree from Cornell University in 1958, and since then, his scholarly contributions have enriched the fields of production planning and scheduling and project scheduling. This collection of papers is contributed in his honor by his students, colleagues, and acquaintances. It offers a tribute to the inspiration received from his work, and from his guidance and advice over the years, and recognizes the legacy of his many contributions. Dr. Elmaghraby is a pioneer in the area of project scheduling (in particular, project planning and control through network models, for which he coined the term ‘activity networks’.) In his initial work in this area, he developed an algebra based on signal flow graphs and semi-Markov processes for analyzing generalized activity networks involving activities with probabilistic durations. This work led to the development of what was later known as the Graphical Evaluation and Review Technique (GERT), and GERT simulation models. He has made fundamental contributions in determining criticality indices for activities, in developing methodologies for project compression and time/cost analysis, and in the use of stochastic and chance-constrained programming and Petri Nets for the analysis of activity networks. This volume brings together fourteen contributions, which can be viewed under the following three main themes: operations research and its application in production planning; project scheduling, and production scheduling, inspired by, and in many cases based on, Dr. Elmaghraby’s work in these areas. The first five chapters are devoted to the first theme, followed by four chapters each devoted to the other two, respectively. An additional chapter is devoted to the vulnerability of multimodal freight systems.

Planning Production and Inventories in the Extended Enterprise
Planning Production and Inventories in the Extended Enterprise

Author: Karl G. Kempf

Publisher: Springer Science & Business Media

Published: 2011-01-12

Total Pages: 652

ISBN-13: 1441964851

DOWNLOAD EBOOK

In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps.

Mathematical and Computational Models for Congestion Charging
Mathematical and Computational Models for Congestion Charging

Author: Siriphong Lawphongpanich

Publisher: Springer Science & Business Media

Published: 2006-06-05

Total Pages: 246

ISBN-13: 038729645X

DOWNLOAD EBOOK

Rigorous treatments of issues related to congestion pricing are described in this book. It examines recent advances in areas such as mathematical and computational models for predicting traffic congestion, determining when, where, and how much to levy tolls, and analyzing the impact on transportation systems. The book follows recent schemes judged to be successful in London, Singapore, Norway, as well as a number of projects in the United States.

Handbook of Industrial Engineering
Handbook of Industrial Engineering

Author: Gavriel Salvendy

Publisher: John Wiley & Sons

Published: 2001-05-25

Total Pages: 2846

ISBN-13: 9780471330578

DOWNLOAD EBOOK

Unrivaled coverage of a broad spectrum of industrial engineering concepts and applications The Handbook of Industrial Engineering, Third Edition contains a vast array of timely and useful methodologies for achieving increased productivity, quality, and competitiveness and improving the quality of working life in manufacturing and service industries. This astoundingly comprehensive resource also provides a cohesive structure to the discipline of industrial engineering with four major classifications: technology; performance improvement management; management, planning, and design control; and decision-making methods. Completely updated and expanded to reflect nearly a decade of important developments in the field, this Third Edition features a wealth of new information on project management, supply-chain management and logistics, and systems related to service industries. Other important features of this essential reference include: * More than 1,000 helpful tables, graphs, figures, and formulas * Step-by-step descriptions of hundreds of problem-solving methodologies * Hundreds of clear, easy-to-follow application examples * Contributions from 176 accomplished international professionals with diverse training and affiliations * More than 4,000 citations for further reading The Handbook of Industrial Engineering, Third Edition is an immensely useful one-stop resource for industrial engineers and technical support personnel in corporations of any size; continuous process and discrete part manufacturing industries; and all types of service industries, from healthcare to hospitality, from retailing to finance. Of related interest . . . HANDBOOK OF HUMAN FACTORS AND ERGONOMICS, Second Edition Edited by Gavriel Salvendy (0-471-11690-4) 2,165 pages 60 chapters "A comprehensive guide that contains practical knowledge and technical background on virtually all aspects of physical, cognitive, and social ergonomics. As such, it can be a valuable source of information for any individual or organization committed to providing competitive, high-quality products and safe, productive work environments."-John F. Smith Jr., Chairman of the Board, Chief Executive Officer and President, General Motors Corporation (From the Foreword)

Formal Methods in Manufacturing
Formal Methods in Manufacturing

Author: Javier Campos

Publisher: CRC Press

Published: 2018-09-03

Total Pages: 728

ISBN-13: 1466561564

DOWNLOAD EBOOK

Illustrated with real-life manufacturing examples, Formal Methods in Manufacturing provides state-of-the-art solutions to common problems in manufacturing systems. Assuming some knowledge of discrete event systems theory, the book first delivers a detailed introduction to the most important formalisms used for the modeling, analysis, and control of manufacturing systems (including Petri nets, automata, and max-plus algebra), explaining the advantages of each formal method. It then employs the different formalisms to solve specific problems taken from today’s industrial world, such as modeling and simulation, supervisory control (including deadlock prevention) in a distributed and/or decentralized environment, performance evaluation (including scheduling and optimization), fault diagnosis and diagnosability analysis, and reconfiguration. Containing chapters written by leading experts in their respective fields, Formal Methods in Manufacturing helps researchers and application engineers handle fundamental principles and deal with typical quality goals in the design and operation of manufacturing systems.