This book includes the original, peer reviewed research papers from the conference, Proceedings of the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications and structure dynamics and control.
This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.
This book presents peer reviewed articles from the Green Materials and Electronic Packaging Interconnect Technology Symposium, (EPITS 2022), held in Langkawi, Malaysia on 14th and 15th of Sept, 2022. It brings together packaging experts to share and exchange ideas in electronics technology. Topics covered in this volume include, but are not limited to; (1) Green materials and technology, (2) Emerging interconnect materials and technologies,(3) Non-solder interconnect materials at chip and package levels, (4) Fundamental materials behavior for electronic packaging materials, (5) Advanced characterization methods as applied to electronic packaging technology, (6) Developments in high temperature Pb-free solders and associated interconnects for automotive and power electronics, (7) Surface coating materials & (8) Advanced materials.
FROM LED TO SOLID STATE LIGHTING A comprehensive and practical reference complete with hands-on exercises and experimental data In From LED to Solid State Lighting: Principles, Materials, Packaging, Characterization, and Applications, accomplished mechanical engineers Shi-Wei Ricky Lee, Jeffery C. C. Lo, Mian Tao, and Huaiyu Ye deliver a practical overview of the design and construction of LED lighting modules, from the fabrication of the LED chip to the LED modules incorporated in complete LED lighting fixtures. The distinguished authors discuss the major advantages of solid-state lighting, including energy savings, environmental friendliness, and lengthy operational life, as well as the contributions offered by the packaging of light-emitting diodes in the pursuit of these features. Readers will discover presentations of the technical issues that arise in packaging LED components, like interconnection, phosphor deposition, and encapsulation. They’ll also find insightful elaborations on optical design, analysis, and characterization. Discussions of LED applications, technology roadmaps, and IP issues round out the included material. This important book also includes: Thorough introductions to lighting, photometry, and colorimetry, the fundamentals of light-emitting diodes, and the fabrication of LED wafers and chips Practical discussions of the packaging of LED chips, wafer-level packaging of LED arrays, and optical and electrical characterization Comprehensive explorations of board-level assembly and LED modules and optical and electrical characterization In-depth examinations of thermal management, reliability engineering for LED packaging, and applications for general lighting Perfect for post-graduate students and practicing engineers studying or working in the field of LED manufacturing for solid state lighting applications, From LED to Solid State Lighting: Principles, Materials, Packaging, Characterization, and Applications is also an indispensable resource for managers and technicians seeking a one-stop guide to the subject.
Today modern materials science is a vibrant, emerging scientific discipline at the forefront of physics, chemistry, engineering, biology and medicine, and is becoming increasingly international in scope as demonstrated by emerging international and intercontinental collaborations and exchanges. The overall purpose of this book is to provide timely and in-depth coverage of selected advanced topics in materials science. Divided into five sections, this book provides the latest research developments in many aspects of materials science. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers, industrial chemists and students in industry and academia.
Molecular Modeling and Multiscaling Issues for Electronic Material Applications provides a snapshot on the progression of molecular modeling in the electronics industry and how molecular modeling is currently being used to understand material performance to solve relevant issues in this field. This book is intended to introduce the reader to the evolving role of molecular modeling, especially seen through the eyes of the IEEE community involved in material modeling for electronic applications. Part I presents the role that quantum mechanics can play in performance prediction, such as properties dependent upon electronic structure, but also shows examples how molecular models may be used in performance diagnostics, especially when chemistry is part of the performance issue. Part II gives examples of large-scale atomistic methods in material failure and shows several examples of transitioning between grain boundary simulations (on the atomistic level)and large-scale models including an example of the use of quasi-continuum methods that are being used to address multiscaling issues. Part III is a more specific look at molecular dynamics in the determination of the thermal conductivity of carbon-nanotubes. Part IV covers the many aspects of molecular modeling needed to understand the relationship between the molecular structure and mechanical performance of materials. Finally, Part V discusses the transitional topic of multiscale modeling and recent developments to reach the submicronscale using mesoscale models, including examples of direct scaling and parameterization from the atomistic to the coarse-grained particle level.
Since the first light-emitting diode (LED) was invented by Holonyak and Bevacqua in 1962, LEDs have made remarkable progress in the past few decades with the rapid development of epitaxy growth, chip design and manufacture, packaging structure, processes, and packaging materials. LEDs have superior characteristics such as high efficiency, small size, long life, low power consumption, and high reliability. The market for white LED is growing rapidly in various applications. It has been widely accepted that white LEDs will be the fourth illumination source to substitute the incandescent, fluorescent, and high-pressure sodium lamps. With the development of LED chip and packaging technologies, the efficiency of high power white LED will broaden the application markets of LEDs while changing the lighting concepts of our lives. In LED Packaging for Lighting Applications, Professors Liu and Luo cover the full spectrum of design, manufacturing, and testing. Many concepts are proposed for the first time, and readers will benefit from the concurrent engineering and co-design approaches to advanced engineering design of LED products. One of the only books to cover LEDs from package design to manufacturing to testing Focuses on the design of LED packaging and its applications such as road lights Includes design methods and experiences necessary for LED engineers, especially optical and thermal design Introduces novel LED packaging structures and manufacturing processes, such as ASLP Covers reliability considerations, the most challenging problem for the LED industry Provides measurement and testing standards, which are critical for LED development, for both LED and LED fixtures Codes and demonstrations available from the book’s Companion Website This book is ideal for practicing engineers working in design or packaging at LED companies and graduate students preparing for work in industry. This book also provides a helpful introduction for advanced undergraduates, graduates, researchers, lighting designers, and product managers interested in the fundamentals of LED design and production. Color version of selected figures can be found at www.wiley.com/go/liu/led
This volume of Advances in Intelligent Systems and Computing highlights key scientific achievements and innovations in all areas of automation, informatization, computer science, and artificial intelligence. It gathers papers presented at the IITI 2017, the Second International Conference on Intelligent Information Technologies for Industry, which was held in Varna, Bulgaria on September 14–16, 2017. The conference was jointly co-organized by Technical University of Varna (Bulgaria), Technical University of Sofia (Bulgaria), VSB Technical University of Ostrava (Czech Republic) and Rostov State Transport University (Russia). The IITI 2017 brought together international researchers and industrial practitioners interested in the development and implementation of modern technologies for automation, informatization, computer science, artificial intelligence, transport and power electrical engineering. In addition to advancing both fundamental research and innovative applications, the conference is intended to establish a new dissemination platform and an international network of researchers in these fields.
This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.
To celebrate Professor Avi Bar-Cohen's 65th birthday, this unique volume is a collection of recent advances and emerging research from various luminaries and experts in the field. Cutting-edge technologies and research related to thermal management and thermal packaging of micro- and nanoelectronics are covered, including enhanced heat transfer, heat sinks, liquid cooling, phase change materials, synthetic jets, computational heat transfer, electronics reliability, 3D packaging, thermoelectrics, data centers, and solid state lighting.This book can be used by researchers and practitioners of thermal engineering to gain insight into next generation thermal packaging solutions. It is an excellent reference text for graduate-level courses in heat transfer and electronics packaging.
