AUV Steering Parameter Identification for Improved Control Design

AUV Steering Parameter Identification for Improved Control Design

Author: Jay H. Johnson

Publisher:

Published: 2001

Total Pages: 58

ISBN-13:

DOWNLOAD EBOOK

Any effort to provide precision control for an Autonomous Underwater Vehicle requires an accurate estimation of both the vehicles physical and hydrodynamic parameters. Here a vehicle model for controlled steering behaviors was developed and the hydrodynamic parameters were calculated from actual data obtained from operation. The steering equation parameters are based on a least squares fit to sideslip and turn rate data using maximum likelihood of batch processing. In this way, a more accurate simulation has been found for the development of a track controller that stably drives the vehicle between mission waypoints. Prediction accuracy of the model was better than ninety-five percent over the data set used.


Modeling and Guidance of an Underactuated Autonomous Underwater Vehicle

Modeling and Guidance of an Underactuated Autonomous Underwater Vehicle

Author: Ali H M Wadi

Publisher:

Published: 2017

Total Pages: 121

ISBN-13:

DOWNLOAD EBOOK

"Autonomous Underwater Vehicles (AUVs) have become an indispensable tool that is employed by an array of fields. From the inspection of underwater cables and pipelines, to the monitoring of fish pens and coral reefs, to the detection and disposal of mines, and to the executing search and rescue operations, AUV research and development has received a lot of attention. This thesis is concerned with the mathematical modeling of an underactuated AUV to execute its missions. The modeling task entails identification of the numerous parameters of the vehicle. A finite element analysis software was used to estimate the parameters describing drag and hydrodynamic mass phenomena. While the proposed underactuated configuration promotes the deployment of more energy-efficient vehicles, this configuration imposes complications on the guidance and motion control tasks as the vehicle becomes constrained in the way it can reach certain positions or perform certain motions (anholonomy). To tackle this trajectory tracking guidance problem, a model-based controller that overcomes the underactuated nature of the vehicle was designed. This controller was further enhanced by the novel development and application of a Universal Adaptive Stabilizer-based adaptation law that aims to minimize controller effort, reject noise, and provide robust trajectory tracking. The adaptation is governed by a statistical management system to ensure proper operation in a noisy underwater environment. Moreover, the navigation problem is touched upon by implementing a sensor fusion algorithm to estimate the vehicle state in its noisy environment. The algorithm investigates an Extended Kalman Filter as well as an Unscented Kalman Filter to fuse the available information from sensors with the modeled dynamics of the vehicle and provide better estimates of the vehicle state. Additionally, the hardware and software was integrated in a Robot Operating System setting, and a Gazebo-based simulation environment that enables the visual depiction and testing of algorithms on the considered AUV was developed. The parameter identification methodology compared well to published analytical and empirical forms, the proposed adaptation law outperformed traditional techniques like Adaptive Proportional Controllers, and the gain management system demonstrated excellent potential at maintaining stable operation of the vehicle in very noisy environments."--Abstract.


Development and Testing of Navigation Algorithms for Autonomous Underwater Vehicles

Development and Testing of Navigation Algorithms for Autonomous Underwater Vehicles

Author: Francesco Fanelli

Publisher: Springer

Published: 2019-04-16

Total Pages: 108

ISBN-13: 303015596X

DOWNLOAD EBOOK

This book focuses on pose estimation algorithms for Autonomous Underwater Vehicles (AUVs). After introducing readers to the state of the art, it describes a joint endeavor involving attitude and position estimation, and details the development of a nonlinear attitude observer that employs inertial and magnetic field data and is suitable for underwater use. In turn, it shows how the estimated attitude constitutes an essential type of input for UKF-based position estimators that combine position, depth, and velocity measurements. The book discusses the possibility of including real-time estimates of sea currents in the developed estimators, and highlights simulations that combine real-world navigation data and experimental test campaigns to evaluate the performance of the resulting solutions. In addition to proposing novel algorithms for estimating the attitudes and positions of AUVs using low-cost sensors and taking into account magnetic disturbances and ocean currents, the book provides readers with extensive information and a source of inspiration for the further development and testing of navigation algorithms for AUVs.


Predictive Functional Control

Predictive Functional Control

Author: Jacques Richalet

Publisher: Springer Science & Business Media

Published: 2009-05-13

Total Pages: 236

ISBN-13: 1848824939

DOWNLOAD EBOOK

first industrial application of MPC was in 1973. A key motivation was to provide better performance than could be obtained with the widely-used PID controller whilst making it easy to replace the PID controller unit or module with his new algorithm. It was the advent of digital control technology and the use of software control algorithms that made this replacement easier and more acceptable to process engineers. A decade of industrial practice with PFC was reported in the archival literature by Jacques Richalet et al. in 1978 in an important seminal Automatica paper. Around this time, Cutler and Ramaker published the dynamic matrix control algorithm that also used knowledge of future reference signals to determine a sequence of control signal adjustment. Thus, the theoretical and practical development of predictive control methods was underway and subsequent developments included those of generalized predictive control, and the whole armoury of MPC methods. Jacques Richalet’s approach to PFC was to seek an algorithm that was: • easy to understand; • easy to install; • easy to tune and optimise. He sought a new modular control algorithm that could be readily used by the control-technician engineer or the control-instrument engineer. It goes without saying that this objective also forms a good market strategy.


Intelligent Robotics and Applications

Intelligent Robotics and Applications

Author: Xin-Jun Liu

Publisher: Springer Nature

Published: 2021-10-19

Total Pages: 780

ISBN-13: 3030890929

DOWNLOAD EBOOK

The 4-volume set LNAI 13013 – 13016 constitutes the proceedings of the 14th International Conference on Intelligent Robotics and Applications, ICIRA 2021, which took place in Yantai, China, during October 22-25, 2021. The 299 papers included in these proceedings were carefully reviewed and selected from 386 submissions. They were organized in topical sections as follows: Robotics dexterous manipulation; sensors, actuators, and controllers for soft and hybrid robots; cable-driven parallel robot; human-centered wearable robotics; hybrid system modeling and human-machine interface; robot manipulation skills learning; micro_nano materials, devices, and systems for biomedical applications; actuating, sensing, control, and instrumentation for ultra-precision engineering; human-robot collaboration; robotic machining; medical robot; machine intelligence for human motion analytics; human-robot interaction for service robots; novel mechanisms, robots and applications; space robot and on-orbit service; neural learning enhanced motion planning and control for human robot interaction; medical engineering.


Autonomous Underwater Vehicles

Autonomous Underwater Vehicles

Author: Nuno Cruz

Publisher: BoD – Books on Demand

Published: 2011-10-21

Total Pages: 274

ISBN-13: 9533074329

DOWNLOAD EBOOK

Autonomous Underwater Vehicles (AUVs) are remarkable machines that revolutionized the process of gathering ocean data. Their major breakthroughs resulted from successful developments of complementary technologies to overcome the challenges associated with autonomous operation in harsh environments. Most of these advances aimed at reaching new application scenarios and decreasing the cost of ocean data collection, by reducing ship time and automating the process of data gathering with accurate geo location. With the present capabilities, some novel paradigms are already being employed to further exploit the on board intelligence, by making decisions on line based on real time interpretation of sensor data. This book collects a set of self contained chapters covering different aspects of AUV technology and applications in more detail than is commonly found in journal and conference papers. They are divided into three main sections, addressing innovative vehicle design, navigation and control techniques, and mission preparation and analysis. The progress conveyed in these chapters is inspiring, providing glimpses into what might be the future for vehicle technology and applications.


Maritime Technology and Engineering III

Maritime Technology and Engineering III

Author: Carlos Guedes Soares

Publisher: CRC Press

Published: 2016-12-01

Total Pages: 2358

ISBN-13: 1315342650

DOWNLOAD EBOOK

Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship Structures, Ship Design, Ship Machinery, Shipyard Technology, afety & Reliability, Fisheries, Oil & Gas, Marine Environment, Renewable Energy and Coastal Structures. Maritime Technology and Engineering 3 will appeal to academics, engineers and professionals interested or involved in these fields.