It is applicable to hot-rolled steel surfaces prepared for painting by methods such as blast-cleaning, hand and power tool cleaning and flame cleaning, although these methods rarely lead to comparable results. Essentially, these methods are intended for hot-rolled steel, but blast-cleaning methods, in particular, could also be used on cold-rolled steel of sufficient thickness to withstand any deformation caused by the impact of the abrasive or the effects of power tool cleaning.
This book looks at the applications of coating in piping, valves and actuators in the offshore oil and gas industry. Providing a key guide for professionals and students alike, it highlights specific coating standards within the industry, including ISO, NORSOK, SSPC and NACE. In the corrosive environment of a seawater setting, coatings to protect pipes, valves and actuators are essential. This book provides both the theory behind these coatings and practical applications, including case studies from multinational companies. It covers different offshore zones and their corrosivity level alongside the different types of external corrosion, such as stress cracking and hydrogen-induced stress cracking. The key coatings discussed are zinc-rich coatings, thermal spray zinc or aluminum, phenolic epoxy and passive fire protection, with a review of their defects and potential failures. The book also details the role of coating inspectors and explains how to diagnose faults. Case studies from companies such as Aker Solutions, Baker Hughes, Equinor and British Petroleum illustrate the wide range of industrial applications of coating technologies. This book is of interest to engineers and students in materials, coating, mechanical, piping or petroleum engineering.
This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more designâoriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.
