HRIS Abstracts
HRIS Abstracts

Author: National Research Council (U.S.). Highway Research Information Service

Publisher:

Published: 1989

Total Pages: 906

ISBN-13:

DOWNLOAD EBOOK

Advanced Weigh-in-motion System for Weighing Vehicles at High Speed
Advanced Weigh-in-motion System for Weighing Vehicles at High Speed

Author:

Publisher:

Published: 1998

Total Pages: 28

ISBN-13:

DOWNLOAD EBOOK

A state-of-the-art, Advanced Weigh-In-Motion (WIM) system has been designed, installed, and tested on the west bound side of Interstate I-75/I-40 near the Knox County Weigh Station. The project is a Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and International Road Dynamics, Inc. (IRD) sponsored by the Office of Uranium Programs, Facility and Technology Management Division of the Department of Energy under CRADA No. ORNL95-0364. ORNL, IRD, the Federal Highway Administration, the Tennessee Department of Safety and the Tennessee Department of Transportation have developed a National High Speed WIM Test Facility for test and evaluation of high-speed WIM systems. The WIM system under evaluation includes a Single Load Cell WIM scale system supplied and installed by IRD. ORNL developed a stand-alone, custom data acquisition system, which acquires the raw signals from IRD's in-ground single load cell transducers. Under a separate contract with the Federal Highway Administration, ORNL designed and constructed a laboratory scale house for data collection, analysis and algorithm development. An initial advanced weight-determining algorithm has been developed. The new advanced WIM system provides improved accuracy and can reduce overall system variability by up to 30% over the existing high accuracy commercial WIM system.

Portable Weigh-in-motion System Evaluation
Portable Weigh-in-motion System Evaluation

Author:

Publisher:

Published: 2015

Total Pages: 43

ISBN-13:

DOWNLOAD EBOOK

The Minnesota Local Road Research Board, MnDOT, and SRF performed an evaluation of a portable weigh-inmotion (WIM) system at several locations throughout Minnesota. The system was developed at the University of Minnesota-Duluth and offers roadway designers a low-cost method for obtaining vehicle load distribution data across the state's road network. To deploy the system, the weigh pads of the system were temporarily affixed sensors across the roadway lanes. As vehicles passed over the weigh pads, pressure sensors within the pads detected the weight of vehicles and the system recorded the data for later analysis. Traditional methods for travel monitoring generate traffic volume and classification data, but weigh-in-motion systems give designers a more accurate idea of current and projected traffic loading demands. SRF's testing provided implementation refinements that were incorporated into the system. During the two-year deployment process, the portable WIM system was installed under a wide array of environmental conditions to demonstrate the system's capabilities. Data generated by the system was analyzed. The Final Report details system deployment, calibration, and system accuracy.