This volume contains two additional features which enhance the value of Modern Power Station Practice as a whole: a cumulative subject index and a detailed list of tables of contents for the entire work. The cumulative index provides access to the vast body of information presented in the set, and also indicates at a glance the breadth and depth of the treatment through the use of inclusive page ranges for major topics. In order to allow the reader the greatest flexibility in using the index there are many cross-references. The entries themselves are qualified by up to two descriptive subheadings to allow the most detailed coverage possible of the subject matter. The reproduction of the tables of contents for each volume also provides an overview of the organisation of the individual volumes.
Modern Power Station Practice, Second Edition, Volume 2: Mechanical (Boilers, Fuel-, and Ash-Handling Plant) focuses on the design, manufacture and operation of boiler units and fuel-and ash-handling plants. This book is organized into five main topics—furnace and combustion equipment, steam and water circuits, ancillary plant and fittings, dust extraction and draught plant, and fuel-and ash-handling plant. In these topics, this text specifically discusses the influence of nature of coal on choice of firing equipment; oil-burner arrangements, ignition and control; disposition of the heating surfaces; and water side or "on-load corrosion. The boiler plant cleaning methods and equipment, water-level gauges and remote indicators for drum-type boilers, and assessment of emission from boiler plant are also elaborated. This publication likewise covers the types of dust extraction plant, operational experience of boiler house bunkers, and auxiliary system for pulverized fuel plant. This volume is beneficial to operators and manufacturers of boilers and fuel-and ash-handling plants.
This is part of a 12 volume set. Volume M is the index covering all subjects in the other volumes. contents for the entire 12-volume work. The cumulative index provides access to the information presented in the set, and indicates at a glance the breadth and depth of the treatment through the use of inclusive page ranges for major topics. In order to allow the reader flexibility in using the index there are many cross-references. The entries themselves are qualified by up to two descriptive subheadings to allow detailed coverage. The reproduction of contents for each volume also provides an overview of the organization of the individual volumes.
The introduction of new 500 MW and 660 MW turbine generator plant in nuclear, coal- and oil-fired power stations has been partly responsible for the increase in generating capacity of the CEGB over the last 30 years. This volume provides a detailed account of experience gained in the development, design, manufacture, operation and testing of large turbine-generators in the last 20 years. With the advance in analytical and computational techniques, the application of this experience to future design and operation of large turbine-generator plant will be of great value to engineers in the industry.
This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form.Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies.Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses.· Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable· Describes the workings and environmental impact of each technology· Evaluates the economic viability of each different power generation system
Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR
Thermal Power Plants theme is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. The Theme on Thermal Power Plants presents three main topics which are then expanded into multiple subtopics, each as a chapter. The first topic covers the basic theory including fossil fuel combustion, nuclear fission, thermal fluids and thermodynamic cycles. It then deals with those aspects important to the maintenance of high efficiency and good reliability such as exergy analysis, material characteristics and life extension. The second topic deals with the production of steam. Although this is only the heat receiving part of the steam cycle it is consistent with the general layout of the power plant where the fossil fuel fired boiler or nuclear fission reactor is a separate and distinct part with its own ancilliary equipment. Fossil boilers and nuclear reactors both produce steam but are so different that each is covered separately in its respective series of chapters. The third topic deals with the generation of power utilizing the steam produced in the boiler or reactor. Several chapters cover steam turbine design and operation. Since power must be produced to exactly match the demand, consideration is given to operational constraints and protective devices. Heat rejection in cooling towers is important where no large body of water exists and is addressed in one chapter. Gas turbines are used for peak power generation and, with steam turbines, for combined cycle plants so are dealt with in two chapters. Conversion of mechanical power from the turbine to electrical power for distribution to the consumer is an important aspect and is covered by the last chapter. These three volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.
