Limits, Modeling and Design of High-Speed Permanent Magnet Machines
Limits, Modeling and Design of High-Speed Permanent Magnet Machines

Author: Aleksandar Borisavljevic

Publisher: Springer Science & Business Media

Published: 2012-10-31

Total Pages: 229

ISBN-13: 3642334571

DOWNLOAD EBOOK

There is a growing number of applications that require fast-rotating machines; motivation for this thesis comes from a project in which downsized spindles for micro-machining have been researched. The thesis focuses on analysis and design of high-speed PM machines and uses a practical design of a high-speed spindle drive as a test case. Phenomena, both mechanical and electromagnetic, that take precedence in high-speed permanent magnet machines are identified and systematized. The thesis identifies inherent speed limits of permanent magnet machines and correlates those limits with the basic parameters of the machines. The analytical expression of the limiting quantities does not only impose solid constraints on the machine design, but also creates the way for design optimization leading to the maximum mechanical and/or electromagnetic utilization of the machine. The models and electric-drive concepts developed in the thesis are evaluated in a practical setup.

Mathematical Models for the Design of Electrical Machines
Mathematical Models for the Design of Electrical Machines

Author: Frédéric Dubas

Publisher: MDPI

Published: 2021-03-15

Total Pages: 252

ISBN-13: 3036503986

DOWNLOAD EBOOK

This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.

Mechanical Design and Manufacturing of Electric Motors
Mechanical Design and Manufacturing of Electric Motors

Author: Wei Tong

Publisher: CRC Press

Published: 2022-05-19

Total Pages: 987

ISBN-13: 1000555046

DOWNLOAD EBOOK

1. Focuses on practical design and manufacturing process 2. Contains Industrial working experiences 3. Includes innovations in development of electric machines 4. Includes read-to-implement solutions in electric machine design 5. Discusses state-of-the-art technology in modern electric machine design

Electric Machines for Smart Grids Applications
Electric Machines for Smart Grids Applications

Author: Adel El-Shahat

Publisher: BoD – Books on Demand

Published: 2018-12-12

Total Pages: 272

ISBN-13: 1789845963

DOWNLOAD EBOOK

In this book, highly qualified scientists present their recent research motivated by the importance of electric machines. It addresses advanced studies for high-speed electrical machine design, mechanical design of rotors with surface-mounted permanent magnets, design of motor drive for brushless DC motor, single-phase motors for household applications, battery electric propulsion systems for competition racing applications, robust diagnosis by observer using the bond graph approach, a DC motor simulator based on virtual instrumentation, start-up of a PID fuzzy logic embedded control system for the speed of a DC motor using LabVIEW, advanced control of the permanent magnet synchronous motor and optimization of fuzzy logic controllers by particle swarm optimization to increase the lifetime in power electronic stages.

The Design of High Performance Mechatronics - 2nd Revised Edition
The Design of High Performance Mechatronics - 2nd Revised Edition

Author: R. Munnig Schmidt

Publisher: IOS Press

Published: 2014-01-08

Total Pages: 928

ISBN-13: 1614993688

DOWNLOAD EBOOK

Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.

The Design of High Performance Mechatronics - 3rd Revised Edition
The Design of High Performance Mechatronics - 3rd Revised Edition

Author: R. Munnig Schmidt

Publisher: IOS Press

Published: 2020-02-05

Total Pages: 949

ISBN-13: 164368051X

DOWNLOAD EBOOK

Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is emeritus professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. He also teaches Mechatronics at the Eindhoven University of Technology. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.

Thermal, Mechanical, and Hybrid Chemical Energy Storage Systems
Thermal, Mechanical, and Hybrid Chemical Energy Storage Systems

Author: Klaus Brun

Publisher: Academic Press

Published: 2020-09-24

Total Pages: 636

ISBN-13: 012819894X

DOWNLOAD EBOOK

Thermal, Mechanical, and Hybrid Chemical Energy Storage Systems provides unique and comprehensive guidelines on all non-battery energy storage technologies, including their technical and design details, applications, and how to make decisions and purchase them for commercial use. The book covers all short and long-term electric grid storage technologies that utilize heat or mechanical potential energy to store electricity, including their cycles, application, advantages and disadvantages, such as round-trip-efficiency, duration, cost and siting. Also discussed are hybrid technologies that utilize hydrogen as a storage medium aside from battery technology. Readers will gain substantial knowledge on all major mechanical, thermal and hybrid energy storage technologies, their market, operational challenges, benefits, design and application criteria. - Provide a state-of-the-art, ongoing R&D review - Covers comprehensive energy storage hybridization tactics - Features standalone chapters containing technology advances, design and applications

Permanent Magnet Synchronous and Brushless DC Motor Drives
Permanent Magnet Synchronous and Brushless DC Motor Drives

Author: Ramu Krishnan

Publisher: CRC Press

Published: 2017-12-19

Total Pages: 611

ISBN-13: 1420014234

DOWNLOAD EBOOK

Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.

The Proceedings of the 17th Annual Conference of China Electrotechnical Society
The Proceedings of the 17th Annual Conference of China Electrotechnical Society

Author: Jian Li

Publisher: Springer Nature

Published: 2023-03-31

Total Pages: 1411

ISBN-13: 981990451X

DOWNLOAD EBOOK

This book gathers outstanding papers presented at the 17th Annual Conference of China Electrotechnical Society, organized by China Electrotechnical Society (CES), held in Beijing, China, from September 17 to 18, 2022. It covers topics such as electrical technology, power systems, electromagnetic emission technology, and electrical equipment. It introduces the innovative solutions that combine ideas from multiple disciplines. The book is very much helpful and useful for the researchers, engineers, practitioners, research students, and interested readers.

Advances in Manufacturing Engineering and Materials II
Advances in Manufacturing Engineering and Materials II

Author: Sergej Hloch

Publisher: Springer Nature

Published: 2021-03-16

Total Pages: 424

ISBN-13: 3030719561

DOWNLOAD EBOOK

This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.