Fiber Crystal Growth from the Melt reviews the growth, modelling, characterization and application of single crystal fibers. Due to their very large length-to-diameter ratio together with perfect crystallographic structure and chemical homogeneity, such fibers have mechanical and physical properties that approach the theoretical values. Fukuda explains how their ultra-high strength enables their application as reinforcing agents in structural components. And he elucidates how and why fiber crystals are particularly well suited for wave guiding, tunable narrow-band filters and nonlinear optics and for the generation of green, blue and violet wavelenghts, and also as micro lasers and laser modulators.
Fiber Crystal Growth from the Melt reviews the growth, modelling, characterization and application of single crystal fibers. Due to their very large length-to-diameter ratio together with perfect crystallographic structure and chemical homogeneity, such fibers have mechanical and physical properties that approach the theoretical values. Fukuda explains how their ultra-high strength enables their application as reinforcing agents in structural components. And he elucidates how and why fiber crystals are particularly well suited for wave guiding, tunable narrow-band filters and nonlinear optics and for the generation of green, blue and violet wavelenghts, and also as micro lasers and laser modulators.
Fiber Crystal Growth from the Melt reviews the growth, modelling, characterization and application of single crystal fibers. Due to their very large length-to-diameter ratio together with perfect crystallographic structure and chemical homogeneity, such fibers have mechanical and physical properties that approach the theoretical values. Fukuda explains how their ultra-high strength enables their application as reinforcing agents in structural components. And he elucidates how and why fiber crystals are particularly well suited for wave guiding, tunable narrow-band filters and nonlinear optics and for the generation of green, blue and violet wavelenghts, and also as micro lasers and laser modulators.
This volume offers an overview of the growth of shaped crystals (oxides, fluorides, etc.) by the micro-pulling-down technique. Both melt and solution (flux) growth are considered. The advantages and disadvantages of the method are discussed in detail and compared with related crystal-growth processes. The authors attempt to give a practical introduction to this technique, thereby also explaining how its application can help to solve problems commonly encountered in other melt-growth methods.
Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.
Fibre (rod) and sheet-shaped crystals with specified size for use as final products without additional machining are required in various applications of modern engineering. In order to avoid formation of internal mechanical stress in the crystal, lateral surface shaping without contact with container walls is preferred. As the crystal is not restricted by crucible walls, its cross-section is determined by the meniscus-shaping capillary forces and the heat and mass-exchange in the melt-crystal system. Any variation of the pulling rate, pressure, temperature gradient in the furnace, and melt temperature at the meniscus base leads to a change in the crystal cross-section and to pinch formation. Over the past two decades, many experimental and theoretical studies have been reported on a powerful approach to crystal lateral surface shaping without contact with container walls, namely the so-called edge-defined film-fed growth (EFG) technique. The shape and size of a single crystal grown by EFG is determined by the shape and size of the meniscus, (i.e: the liquid bridge retained between the die and the crystal) which depend on the radius or half-thickness of the die and other properties such as pulling rate, pressure, temperature gradient and melt temperature. In this book, theoretical and numerical results are obtained using a non-linear mathematical model of the EFG method. Theoretical results presented for fibres and sheets are rigorously obtained on the basis of the equations of the model. Numerical results are obtained on the basis of theoretical results using experimental data. Such results offer a complete package of the possibilities of the model for equipment designers and practical crystal growers.
This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.
This book introduces anisotropic innovations in liquid crystalline polymers as well as new nanocomposite materials and testing techniques. The authors detail the newest discoveries of material properties, material types and phases, and material characterization. This interdisciplinary work creates valuable links that strengthen the approach to the evolving field of liquid crystalline polymers/ materials.
F. T. Wallenberger This book serves as an introduction to advanced inorganic fibers and aims to support fundamental research, assist applied scientists and designers in industry, and facilitate materials science instruction in universities and colleges. Its three main sections deal with fibers which are derived from the vapor phase such as single crystal silicon whiskers or carbon nanotubes, from the liquid phase such as advanced glass and single crystal oxide fibers, and from solid precursor fibers such as carbon and ceramic fibers. Contents FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE 1.1 The most important phase isthe liquid phase 1.2 Afiber by any name isstill afiber 1.3 Biographic sketches ofthe authors 1.4 Acknowledgments CHAPTER 1 FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE F. T. Wallenberger The book describes advanced inorganic fibers, focuses on principles and concepts, analyzes experimental and commercial processes, and relates process variables to structures, structures tofiber properties and fiber properties to end-use performance. In principle, there are discontinuous or inherently short, and continuous or potentially endless, fibers. Short fibers range from asbestos fibers, which were described as early as 300 BC to carbon nanotubes which were discovered in 1991 [1] and have been fully described in 1999 [2].
Kein anderes Werk bietet Ihnen diese Informationsfülle zu Reaktionen und Methoden der anorganischen Chemie in ähnlich einheitlicher, knapp zusammengefaßter, hervorragend organisierter Form! Neben Beiträgen aus allen Bereichen der anorganischen Chemie finden Sie in diesem Band eine tiefergehende Behandlung von Reaktionen zur Bindungsknüpfung, übersichtlich geordnet nach den beteiligten Elementen. Ein Verbindungsregister eröffnet Ihnen verschiedene Alternativen zum schnellen, zuverlässigen Auffinden von Informationen. (06/99)
