Presents simple techniques for designing and laying out circuits that meet the most stringent domestic and international regulations on electromagnetic compatibility for high technology products. Includes sample designs in every stage of the product development cycle, information on the latest suppression techniques, and a checklist of layout techniques. Annotation copyrighted by Book News, Inc., Portland, OR
This book provides the knowledge and good design practice for the design or test engineer to take the necessary measures to improve EMC performance and therefore the chance of achieving compliance, early on in the design process. There are many advantages for both the component supplier and consumer, of looking at EMC at component and PCB level. For the suppliers, not only will their products have the competitive edge because they have known EMC performance, but they will be prepared should EMC compliance become mandatory in the future. For consumers it is a distinct advantage to know how a component will behave within a system with regard to EMC. Shows how to achieve EMC compliance early on in the design process Provides the knowledge to trace system EMC performance problems Follows best design practices
This accessible, new reference work shows how and why RF energy iscreated within a printed circuit board and the manner in whichpropagation occurs. With lucid explanations, this book enablesengineers to grasp both the fundamentals of EMC theory and signalintegrity and the mitigation process needed to prevent an EMCevent. Author Montrose also shows the relationship between time andfrequency domains to help you meet mandatory compliancerequirements placed on printed circuit boards. Using real-world examples the book features: Clear discussions, without complex mathematical analysis, offlux minimization concepts Extensive analysis of capacitor usage for variousapplications Detailed examination of components characteristics with variousgrounding methodologies, including implementation techniques An in-depth study of transmission line theory A careful look at signal integrity, crosstalk, andtermination
INTRODUCTION TO ELECTROMAGNETIC COMPATIBILITY The revised new edition of the classic textbook is an essential resource for anyone working with today’s advancements in both digital and analog devices, communications systems, as well as power/energy generation and distribution. Introduction to Electromagnetic Compatibility provides thorough coverage of the techniques and methodologies used to design and analyze electronic systems that function acceptably in their electromagnetic environment. Assuming no prior familiarity with electromagnetic compatibility, this user-friendly textbook first explains fundamental EMC concepts and technologies before moving on to more advanced topics in EMC system design. This third edition reflects the results of an extensive detailed review of the entire second edition, embracing and maintaining the content that has “stood the test of time”, such as from the theory of electromagnetic phenomena and associated mathematics, to the practical background information on U.S. and international regulatory requirements. In addition to converting Dr. Paul’s original SPICE exercises to contemporary utilization of LTSPICE, there is new chapter material on antenna modeling and simulation. This edition will continue to provide invaluable information on computer modeling for EMC, circuit board and system-level EMC design, EMC test practices, EMC measurement procedures and equipment, and more such as: Features fully-worked examples, topic reviews, self-assessment questions, end-of-chapter exercises, and numerous high-quality images and illustrations Contains useful appendices of phasor analysis methods, electromagnetic field equations and waves. The ideal textbook for university courses on EMC, Introduction to Electromagnetic Compatibility, Third Edition is also an invaluable reference for practicing electrical engineers dealing with interference issues or those wanting to learn more about electromagnetic compatibility to become better product designers.
This book introduces the state-of-the-art research progress of system-level EMC, including theories, design technologies, principles and applications in practice. The engineering design, simulation, prediction, analysis, test, stage control as well as effectiveness evaluation are discussed in detail with extensive project experiences, making the book an essential reference for researchers and industrial engineers.
Proper design of printed circuit boards can make the difference between a product passing emissions requirements during the first cycle or not. Traditional EMC design practices have been simply rule-based, that is, a list of rules-of-thumb are presented to the board designers to implement. When a particular rule-of-thumb is difficult to implement, it is often ignored. After the product is built, it will often fail emission requirements and various time consuming and costly add-ons are then required. Proper EMC design does not require advanced degrees from universities, nor does it require strenuous mathematics. It does require a basic understanding of the underlying principles of the potential causes of EMC emissions. With this basic understanding, circuit board designers can make trade-off decisions during the design phase to ensure optimum EMC design. Consideration of these potential sources will allow the design to pass the emissions requirements the first time in the test laboratory. A number of other books have been published on EMC. Most are general books on EMC and do not focus on printed circuit board is intended to help EMC engineers and design design. This book engineers understand the potential sources of emissions and how to reduce, control, or eliminate these sources. This book is intended to be a 'hands-on' book, that is, designers should be able to apply the concepts in this book directly to their designs in the real-world.
This book simplifies the complex field of electromagnetic compatibility into easy concepts without the need for complicated math or extensive computational analysis. Learn how to design printed circuit boards and systems quickly with just five easy equations. Electromagnetic compatibility requirements are easily achieved with the author's unique approach by transforming Maxwell's Equations (calculus) into Ohm's Law (algebra) in a visual manner. Everyone, regardless of experience, will benefit from learning a new way of solving complex field problems using an oscilloscope instead of a spectrum analyzer. Signal propagation is based on transmission line theory. If one can visualize losses in a transmission line, it becomes easy to achieve EMC at low cost as well as enhanced signal integrity. Easy to read chapters simplify theoretical concepts for those who never took a electromagnetics course in college, or designers that seek to re-learn and understand electromagnetic theory as it applies to both printed circuit boards and systems presented in a revolutionary manner. This book contains the following chapters: Maxwell Made Simple Inductance Made Simple Transmission Line Theory Made Simple Power Distribution Networks Made Simple Referencing Made Simple (a.k.a. Grounding) Shielding, Gasketing and Filtering Made Simple"
The Keep It Simple (KISS) philosophy is the primary focus of this book. It is written in very simple language with minimal math, as a compilation of helpful EMI troubleshooting hints. Its light-hearted tone is at odds with the extreme seriousness of most engineering reference works that become boring after a few pages. This text tells engineers what to do and how to do it. Only a basic knowledge of math, electronics, and a basic understanding of EMI/EMC are necessary to understand the concepts and circuits described. Once EMC troubleshooting is demystified, readers learn there are quick and simple techniques to solve complicated problems a key aspect of this book. Simple and inexpensive methods to resolve EMI issues are discussed to help generate unique ideas and methods for developing additional diagnostic tools and measurement procedures. An appendix on how to build probes is included. It can be a fun activity, even humorous at times with bizarre techniques (i.e., the sticky finger probe).
Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.
Widely regarded as the standard text on EMC, Tim Williams book provides all the key information needed to meet the requirements of the latest EMC Directive. Most importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties, meeting the needs of specific standards and resulting in a better overall product. As well as covering the very latest legal requirements, the fourth edition has been thoroughly updated in line with the latest best practice in EMC compliance and product design. Coverage has been considerably expanded to include the R & TTE and Automotive EMC Directives, as well the military aerospace standards of DEF STAN 59-41 and DO160E. A new chapter on systems EMC is included, while short case studies demonstrate how EMC product design is put into practice. Tim Williams has worked for a variety of companies as an electronic design engineer over the last 25 years. He has monitored the progress of the EMC Directive and its associated standards since it was first made public. He now runs his own consultancy specialising in EMC design and test advice and training. * Includes the compliance procedures of the latest EMC Directive: 2004/108/EC * Short case studies demonstrating how EMC product design is put into practice. * Packed full with many new chapters including: - The R & TTE Directive and the Automotive EMC Directive looking at compliance aspects of radio and telecom terminal equipment and automotive electronic products - New chapter on military aerospace standards of DEP STAN 59-41 and DO1 60E - New chapter on systems EMC.
