On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
The objective of this Safety Guide is to provide recommendations for meeting the requirements of GSR Part 4 (Rev. 1) in the development and application of Level 1 Probabilistic Safety Assessments (PSAs) for nuclear power plants (NPPs). The recommendations provided in this publication promoting technical consistency among Level 1 PSA studies, in order to provide reliable support for applications of PSAs and risk informed decision making, particularly to support the design of NPPs and decision making during plant commissioning and operation. The revised Safety Guide's scope encompasses the main methodological aspects of PSA and in particular has been updated to reflect developments in specific areas, such as passive systems reliability, computer based systems reliability, combinations of hazards, human reliability analysis and to expand the scope of PSA to include site level risk considerations such as multi-unit and spent fuel pool PSA.
Reliability and Probabilistic Safety Assessment in Multi-Unit Nuclear Power Plants presents the risk contributions from single and multi-unit Nuclear Power Plants to help aggregate the risks that may arise due to applicable hazards and operating states. The book combines the key features of multi-unit risk assessment in one resource, reviewing the practices adopted in various countries around the globe to exemplify the dependencies between units on a site. These dependencies include multi-unit interactions, environmental stresses, the sharing of systems, and the sharing of human resource in a control room, factors which can all introduce an increase potential for heightened accident conditions. This book helps readers systematically identify events and evaluate techniques of possible accident outcomes within multi-units. It serves as a ready reference for PSA analysts in identifying a suitable site and the sharing of resources, while carrying out multi-unit risk assessments to ensure the safety of the public and the environment. It will also be valuable for nuclear researchers, designers and regulators of nuclear power plants, nuclear regulatory agencies, PSA engineers and practicing safety professionals. - Provides a framework for nuclear and PSA researchers and professionals on the design and operation of multi-unit risk assessments - Reviews practices adopted in various regions around the globe to analyze dependencies between units - Includes modeling techniques of inter-connections and shared resources, as well as risk aggregation
The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.
This Safety Guide provides recommendations on the seismic safety evaluation of nuclear installations. It addresses all types of new and existing nuclear installations. This Safety Guide presents three assessment methodologies: the deterministic approach, generally known as seismic margin assessment (SMA), seismic probabilistic safety assessment (SPSA), and a combination of SMA and SPSA known as probabilistic safety assessment (PSA) based SMA. This Safety Guide provides specific recommendations on applying a performance-based graded approach to the seismic safety evaluation of nuclear installations other than nuclear power plants. It also covers the relation between seismic safety margins and defense-in-depth (DiD) level 3 and level 4. For new nuclear installations, this Safety Guide provides recommendations to assess adequacy of seismic margin to avoid cliff edge effects considering DiD level 3 and level 4. This publication is intended for use by regulatory bodies, operating organizations, and designers of nuclear installations.
The aim of this book is to summarize probabilistic safety assessment (PSA) of nuclear power plants with WWER440 reactors and demonstrate that the plants are safe enough for producing energy even in light of the Fukushima accident. The book examines level 1 and 2 full power, low power and shutdown PSA, and summarizes the author’s experience gained during the last 35 years in this area. It provides useful examples taken from PSA training courses the author has lectured and organized by the International Atomic Energy Agency. Such training courses were organised in Argonne National Laboratory (Chicago, IL, USA), Abdus Salaam International Centre for Theoretical Physics (Trieste, Italy), Malaysia, Vietnam and Jordan to support experts from developing countries. The role of PSA for the plants is an estimation of the risks in absolute terms and in comparison with other risks of the technical and the natural world. Plant-specific PSAs are being prepared for the plants and being applied for detection of weaknesses, design improvement and backfitting, incident analysis, accident management, emergency preparedness, prioritization of research and development and to support the regulatory activities. There are three levels of PSA, being performed for full power and low power operation and shutdown operating modes of the plants: level 1, 2 and 3 PSA. The nuclear regulatory authorities do not require the level 3 PSA for the plants in the member countries of the European Union. This means that only a limited number of NPPs in Europe have the level 3 PSA available. However, in the light of the Fukushima accident the performance of such analyses is strongly recommended in the future. This book is intended for professionals working in the nuclear industry, researchers and students interested in safety of operational plants.
The objective of this Safety Guide is to provide recommendations for meeting the IAEA safety requirements in performing or managing a level 2 probabilistic safety assessment (PSA) project for a nuclear power plant; thus it complements the Safety Guide on level 1 PSA. One of the aims of this Safety Guide is to promote a standard framework, standard terms and a standard set of documents for level 2 PSAs to facilitate regulatory and external peer review of their results. It describes all elements of the level 2 PSA that need to be carried out if the starting point is a fully comprehensive level 1 PSA. Contents: 1. Introduction; 2. PSA project management and organization; 3. Identification of design aspects important to severe accidents and acquisition of information; 4. Interface with level 1 PSA: Grouping of sequences; 5. Accident progression and containment analysis; 6. Source terms for severe accidents; 7. Documentation of the analysis: Presentation and interpretation of results; 8. Use and applications of the PSA; References; Annex I: Example of a typical schedule for a level 2 PSA; Annex II: Computer codes for simulation of severe accidents; Annex III: Sample outline of documentation for a level 2 PSA study.
This publication explains how a reactor technology assessment is performed and how the process and its results enable decision making for nuclear power planning and implementation at each of its phases. The methodology has been revised to incorporate developments since the first edition in 2013 and includes feedback from comprehensive training workshops offered for the last six years to Member States introducing nuclear power programmes. The aim of this publication is to help newcomer Member States to understand the complexity involved in the selection of the most suitable reactor technology as well as obligations and responsibilities integral to an unbiased assessment. The publication can also be used by countries that already have nuclear power programmes, to assist in their selection of the next nuclear power plant.
Probabilistic Safety Assessment (PSA) is a structured, comprehensive, and logical analysis method aimed at identifying and assessing risks in complex technological systems, such as the nuclear power plants. It is also known as probabilistic risk assessment – PRA. This book presents the theoretical basis to understand the numerous and complex aspects that are covered by PSA and it will help the reader to better understand and to effectively manage risks. The book provides PSA methods and techniques and it includes recommended procedures that are based on the experience of the authors and applicable to different levels and types of PSA that are used for nuclear power plants applications. It can be used as extra reading for PSA courses for practitioners and it provides quantitative risk methodology documentation for PSA.
