Embankment construction projects on very soft soil often give rise to serious problems. This volume on geotechnics and soft soil engineering therefore treats all phases of the design and construction process exhaustively, from the first investigation step to the monitoring of constructed work. The book presents the development concepts necessary fo
Ground improvement is an established technique in foundation engineering. In recent decades, modern methods of ground improvement have utilised explosives, impact energy, thermal treatment of the soil, vacuum consolidation, vibratory compaction technologies, stabilization and solidification of soft soils, as well as combined systems of ingenious gr
The geosynthetic encased column (GEC) is a relatively recent method developed for soft soil improvement. The method was firstly introduced as a concept in the 1980s and first practical applications started in the 1990s. GECs have been widely used in some parts of the world for the last three decades. However, there is no book in the literature summarizing the knowledge accumulated during this period in relation to this soft ground improvement technique. The purpose of this book is to provide readers with the GEC fundamentals and practical applications. Chapter 1 presents the general principles of this ground improvement technique including the methods used for GEC installation and how the material properties may be selected. Chapter 2 presents the design methods, thus settlement calculations by means of analytical methods and stability calculations by limit equilibrium methods are explained in detail. Chapter 3 presents calculation examples illustrating the usual steps to be done for both service limit state and ultimate limit state designs. Then field performances exemplifying practical applications of the GEC technique are presented in Chapter 4 for some case histories. Following numerical analyses, often used in design to complement analytical methods, are presented in Chapter 5. Annexes I and II at the end contain the charts developed to perform settlement calculations. The book combines the experiences of four authors with different academic and industry backgrounds to describe GEC design and performance. It is aimed at civil engineers in general, particularly geotechnical engineers, either working in design or in practice, at graduate students, and at senior undergraduate students.
GSP 112 contains 37 papers representing the state of the practice in soft ground engineering presented at the Soft Ground Technology Conference, held in Noordwijkerhout, the Netherlands, May 28-June 2, 2000.
Soft Clay Engineering and Ground Improvement covers the design and implementation of ground improvement techniques as applicable to soft clays. This particular subject poses major geotechnical challenges in civil engineering. Not only civil engineers, but planners, architects, consultants and contractors are now aware what soft soils are and the risks associated with development of such areas. The book is designed as a reference and useful tool for those in the industry, both to consultants and contractors. It also benefits researchers and academics working on ground improvement of soft soils, and serves as an excellent overview for postgraduates. University lecturers are beginning to incorporate more ground improvement topics into their curricula, and this text would be ideal for short courses for practicing engineers. It includes several examples to assist a newcomer to carry out preliminary designs. The three authors, each with dozens of years of experience, have witnessed and participated in the rapid evolvement of ground improvement in soft soils. In addition, top-tier professionals who deal with soft clays and ground improvement on a daily basis have contributed, providing their expertise in dealing with real-world problems and practical solutions.
This book presents selected papers from the International Symposium on Geotechnics for Transportation Infrastructure (ISGTI 2018). The research papers cover geotechnical interventions for the diverse fields of policy formulation, design, implementation, operation and management of the different modes of travel, namely road, air, rail and waterways. This book will be of interest to academic and industry researchers working in transportation geotechnics, as also to practicing engineers, policy makers, and civil agencies.
- The first book of its kind, providing over thirty real-life case studies of ground improvement projects selected by the worlds top experts in ground improvement from around the globe. - Volume 3 of the highly regarded Elsevier Geo-engineering book series coordinated by the Series Editor: Professor John A Hudson FREng. - An extremely reader friendly chapter format. - Discusses wider economical and environmental issues facing scientists in the ground improvement.Ground improvement has been both a science and art, with significant developments observed through ancient history. From the use of straw as blended infill with soils for additional strength during the ancient Roman civilizations, and the use of elephants for compaction of earth dams during the early Asian civilizations, the concepts of reinforced earth with geosynthetics, use of electrokinetics and thermal modifications of soils have come a long way. The use of large and stiff stone columns and subsequent sand drains in the past has now been replaced by quicker to install and more effective prefabricated vertical drains, which have also eliminated the need for more expensive soil improvement methods.The early selection and application of the most appropriate ground improvement techniques can improve considerably not only the design and performance of foundations and earth structures, including embankments, cut slopes, roads, railways and tailings dams, but also result in their cost-effectiveness. Ground improvement works have become increasingly challenging when more and more problematic soils and marginal land have to be utilized for infrastructure development.This edited compilation contains a collection of Chapters from invited experts in various areas of ground improvement, who have illustrated the basic concepts and the applications of different ground improvement techniques using real projects that they have been involved in. The case histories from many countries ranging from Asia, America, Australia and Europe are addressed.
The first book on the subject written by a practitioner forpractitioners. Geotechnical Instrumentation for Monitoring FieldPerformance Geotechnical Instrumentation for Monitoring FieldPerformance goes far beyond a mere summary of the technicalliterature and manufacturers’ brochures: it guides readersthrough the entire geotechnical instrumentation process, showingthem when to monitor safety and performance, and how to do it well.This comprehensive guide: * Describes the critical steps of planning monitoring programsusing geotechnical instrumentation, including what benefits can beachieved and how construction specifications should bewritten * Describes and evaluates monitoring methods and recommendsinstruments for monitoring groundwater pressure, deformations,total stress in soil, stress change in rock, temperature, and loadand strain in structural members * Offers detailed practical guidelines on instrument calibrations,installation and maintenance, and on the collection, processing,and interpretation of instrumentation data * Describes the role of geotechnical instrumentation during theconstruction and operation phases of civil engineering projects,including braced excavations, embankments on soft ground,embankment dams, excavated and natural slopes, undergroundexcavations, driving piles, and drilled shafts * Provides guidelines throughout the book on the best practices
