Unmanned ground vehicles (UGV) are expected to play a key role in the Army's Objective Force structure. These UGVs would be used for weapons platforms, logistics carriers, and reconnaissance, surveillance, and target acquisition among other things. To examine aspects of the Army's UGV program, assess technology readiness, and identify key issues in implementing UGV systems, among other questions, the Deputy Assistant Secretary of the Army for Research and Technology asked the National Research Council (NRC) to conduct a study of UGV technologies. This report discusses UGV operational requirements, current development efforts, and technology integration and roadmaps to the future. Key recommendations are presented addressing technical content, time lines, and milestones for the UGV efforts.
Autonomous vehicles (AVs) have been used in military operations for more than 60 years, with torpedoes, cruise missiles, satellites, and target drones being early examples.1 They have also been widely used in the civilian sector-for example, in the disposal of explosives, for work and measurement in radioactive environments, by various offshore industries for both creating and maintaining undersea facilities, for atmospheric and undersea research, and by industry in automated and robotic manufacturing. Recent military experiences with AVs have consistently demonstrated their value in a wide range of missions, and anticipated developments of AVs hold promise for increasingly significant roles in future naval operations. Advances in AV capabilities are enabled (and limited) by progress in the technologies of computing and robotics, navigation, communications and networking, power sources and propulsion, and materials. Autonomous Vehicles in Support of Naval Operations is a forward-looking discussion of the naval operational environment and vision for the Navy and Marine Corps and of naval mission needs and potential applications and limitations of AVs. This report considers the potential of AVs for naval operations, operational needs and technology issues, and opportunities for improved operations.
X-by-wire Unmanned Ground Vehicles (UGVs) have been attracting increased attention for various civilian or military applications. The x-by-wire techniques (drive-by-wire, steer-by-wire, and brake-by-wire techniques) provide the possibility of achieving novel vehicle design and advanced dynamics control, which can significantly improve the overall performance, maneuverability, and mobility of the UGVs. However, there are few full x-by-wire UGVs prototype models reported in the world. Therefore, there is no book that can fully describe the design, configuration, and dynamics control approach of full x-by-wire UGVs, which makes it difficult for readers to study this hot and interesting topic. In this book, we use a full x-by-wire UGV, developed by our group, as the example. This UGV is completely x-by-wire with four in-wheel motors driven and a four-wheel independent steer steer. In this book, the overall design of the UGV, the design of the key subsystems (battery pack system, in-wheel motor-driven system, independent steer system, remote and autonomous control system), and the dynamics control approach will be introduced in detail, and the experiment's results will be provided to validate the proposed dynamics control approach.
This book describes different methods that are relevant to the development and testing of control algorithms for advanced driver assistance systems (ADAS) and automated driving functions (ADF). These control algorithms need to respond safely, reliably and optimally in varying operating conditions. Also, vehicles have to comply with safety and emission legislation. The text describes how such control algorithms can be developed, tested and verified for use in real-world driving situations. Owing to the complex interaction of vehicles with the environment and different traffic participants, an almost infinite number of possible scenarios and situations that need to be considered may exist. The book explains new methods to address this complexity, with reference to human interaction modelling, various theoretical approaches to the definition of real-world scenarios, and with practically-oriented examples and contributions, to ensure efficient development and testing of ADAS and ADF. Control Strategies for Advanced Driver Assistance Systems and Autonomous Driving Functions is a collection of articles by international experts in the field representing theoretical and application-based points of view. As such, the methods and examples demonstrated in the book will be a valuable source of information for academic and industrial researchers, as well as for automotive companies and suppliers.
Control Systems Design of Bio-Robotics and Bio-Mechatronics with Advanced Applications delivers essential and advanced bioengineering information on the application of control and robotics technologies in the life sciences. Judging by what we have witnessed so far, this exciting field of control systems and robotics in bioengineering is likely to produce revolutionary breakthroughs over the next decade. While this book is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs, it will also appeal to medical researchers and practitioners who want to enhance their quantitative understanding of physiological processes. - Focuses on the engineering and scientific principles underlying the extraordinary performance of biomedical robotics and bio-mechatronics - Demonstrates the application of principles for designing corresponding algorithms - Presents the latest innovative approaches to medical diagnostics and procedures, as well as clinical rehabilitation from the point-of-view of dynamic modeling, system analysis and control
This book studies selected advanced flight control schemes for an uncertain quadrotor unmanned aerial vehicle (UAV) systems in the presence of constant external disturbances, parametric uncertainties, measurement noise, time-varying external disturbances, and random external disturbances. Furthermore, in all the control techniques proposed in this book, it includes the simulation results with comparison to other nonlinear control schemes recently developed for the tracking control of a quadrotor UAV. The main contributions of the present book for quadrotor UAV systems are as follows: (i) the proposed control methods are based on the high-order sliding mode controller (SMC) and hybrid control algorithm with an optimization method. (ii) the finite-time control schemes are developed by using fast terminal SMC (FTSMC), nonsingular FTSMC (NFTSMC), global time-varying SMC, and adaptive laws. (iii) the fractional-order flight control schemes are developed by using the fractional-order calculus theory, super twisting algorithm, NFTSMC, and the SMC. This book covers the research history and importance of quadrotor system subject to system uncertainties, external wind disturbances, and noise measurements, as well as the research status of advanced flight control methods, adaptive flight control methods, and flight control based on fractional-order theory. The book would be interesting to most academic undergraduate, postgraduates, researchers on flight control for drones and applications of advanced controllers in engineering field. This book presents a must-survey for advanced finite-time control for quadrotor system. Some parts of this book have the potential of becoming the courses for the modelling and control of autonomous flying machines. Readers (academic researcher, undergraduate student, postgraduate student, MBA/executive, and education practitioner) interested in nonlinear control methods find this book an investigation. This book can be used as a good reference for the academic research on the control theory, drones, terminal sliding mode control, and related to this or used in Ph.D. study of control theory and their application in field engineering.
X-by-wire Unmanned Ground Vehicles (UGVs) have been attracting increased attention for various civilian or military applications. The x-by-wire techniques (drive-by-wire, steer-by-wire, and brake-by-wire techniques) provide the possibility of achieving novel vehicle design and advanced dynamics control, which can significantly improve the overall performance, maneuverability, and mobility of the UGVs. However, there are few full x-by-wire UGVs prototype models reported in the world. Therefore, there is no book that can fully describe the design, configuration, and dynamics control approach of full x-by-wire UGVs, which makes it difficult for readers to study this hot and interesting topic. In this book, we use a full x-by-wire UGV, developed by our group, as the example. This UGV is completely x-by-wire with four in-wheel motors driven and a four-wheel independent steer steer. In this book, the overall design of the UGV, the design of the key subsystems (battery pack system, in-wheel motor-driven system, independent steer system, remote and autonomous control system), and the dynamics control approach will be introduced in detail, and the experiment's results will be provided to validate the proposed dynamics control approach.
This monograph is motivated by a significant number of vision based algorithms for Unmanned Aerial Vehicles (UAV) that were developed during research and development projects. Vision information is utilized in various applications like visual surveillance, aim systems, recognition systems, collision-avoidance systems and navigation. This book presents practical applications, examples and recent challenges in these mentioned application fields. The aim of the book is to create a valuable source of information for researchers and constructors of solutions utilizing vision from UAV. Scientists, researchers and graduate students involved in computer vision, image processing, data fusion, control algorithms, mechanics, data mining, navigation and IC can find many valuable, useful and practical suggestions and solutions. The latest challenges for vision based systems are also presented.
The conference aims at forming a unique platform to bring together academicians and practitioners from industrial engineering and management engineering as well as from other disciplines working on production function applying the tools of operational research and production/operational management. Topics treated include: computer aided manufacturing, industry 4.0, big data and analytics, flexible manufacturing systems, fuzzy logic, industrial applications, information technologies in production management, optimization, production economy, production planning and control, productivity and performance management, project management, quality management, risk analysis and management, supply chain management.
