This report provides guidance on the planning for decommissioning and on the provision of relevant features at the design and construction stages of nuclear power plants. Most of the information presented is equally applicable, however, to planning and implementing the decommissioning of research reactors and prototype reactors. The report will be useful in the context of backfitting and refurbishment of existing facilities.
35 9.2 TYpical PWR Station Layout 36 9.3 Regions of Highest Radiological Hazard 38 9.4 Decommissioning Scenarios 40 9.5 Existing Structural Features of a PWR which may aid Decommissioning 42 9.6 Structural Features that might be introduced into Future PWR Stations to aid Decommissioning 43 10. REFERENCES 44 11. ACKNOWLEDGEMENTS 45 12. TABLES AND FIGURES 45 APPENDIX A - SUPPLEMENTARY INFORMATION 98 1 1. INTRODUCTION 1.1 This report describes the work carried out by Taylor Woodrow Construction Limited (!WC) in a study aimed at identifying features Which may be incorporated at the design stage of future nuclear power plants to facilitate their eventual decommissioning and, in so dOing, promote economic and radiological benefits at the decommissioning stage. 1.2 For the purposes of this study, decommissioning of a nuclear facility means those measures taken at the end of the facility's operating life to remove it from the site and restore the site to green field conditions, and, While so doing, ensure the continued protection of the public from any residual radioactivity or other potential hazards present in or emanating from the facility. The overall decommissioning process involves eventual dismantling and demolition and may also include, Where possible and appropriate, the intermediate steps of renewal and refurbishing.
At a time when many older facilities are being decommissioned and many more are undergoing major retrofits to extend their lives, there is a wealth of information emerging to guide the design of new facilities. In this publication, the most important lessons learned in recent years are examined.
Despite all the efforts being put into expanding renewable energy sources, large-scale power stations will be essential as part of a reliable energy supply strategy for a longer period. Given that they are low on CO2 emissions, many countries are moving into or expanding nuclear energy to cover their baseload supply. Building structures required for nuclear plants whose protective function means they are classified as safety-related, have to meet particular construction requirements more stringent than those involved in conventional construction. This book gives a comprehensive overview from approval aspects given by nuclear and construction law, with special attention to the interface between plant and construction engineering, to a building structure classification. All life cycle phases are considered, with the primary focus on execution. Accidental actions on structures, the safety concept and design and fastening systems are exposed to a particular treatment. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Once a nuclear installation has reached the end of its safe and economical operational lifetime, the need for its decommissioning arises. Different strategies can be employed for nuclear decommissioning, based on the evaluation of particular hazards and their attendant risks, as well as on the analysis of costs of clean-up and waste management. This allows for decommissioning either soon after permanent shutdown, or perhaps a long time later, the latter course allowing for radioactivity levels to drop in any activated or contaminated components. It is crucial for clear processes and best practices to be applied in decommissioning such installations and sites, particular where any significant health and environmental risks exist. This book critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities. Part one focuses on the fundamental planning issues in starting a nuclear decommissioning process, from principles and safety regulations, to financing and project management. Part two covers the execution phase of nuclear decommissioning projects, detailing processes and technologies such as dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse. Finally, part three details international experience in the decommissioning of nuclear applications, including the main nuclear reactor types and nuclear fuel cycle facilities, as well as small nuclear facilities and legacy nuclear waste sites. Critically reviews nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities Discusses the fundamental planning issues in starting a nuclear decommissioning process Considers the execution phase of nuclear decommissioning projects, including dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse
This Safety Guide provides recommendations on the structure and content of the safety analysis report to be submitted by the operating organization to the regulatory body for authorization of the siting, construction, commissioning, operation and decommissioning of a nuclear power plant. It is intended to facilitate both the development of the safety analysis report by the operating organization and the checking of its completeness and adequacy by the regulatory body. The publication is a revision of IAEA Safety Standards Series No. GS-G-4.1, Format and Content of the Safety Analysis Report for Nuclear Power Plants, which it supersedes. The revision reflects feedback experience from the Fukushima Daiichi accident and the subsequent stress tests performed. It also describes good practices and experience from the use of safety analysis reports for newly built nuclear power plants in different States and informs on recent progress made in approaches to safety assessment.
This report identifies and outlines issues for consideration during the design and operation of nuclear facilities to minimize waste generation, facilitate future decommissioning and optimize management of decommissioning waste and material. It is aimed at the broad range of experts involved in the planning, design, construction and operation of new nuclear facilities or the modification of existing facilities. The principles discussed are applicable to all types and classes of nuclear facility dealing with radioactive material. While plant designs will continue to mature and evolve, the waste minimization options identified here will remain relevant to all new facilities and can be used as a checklist during the design, licensing and operational phases of new plants or the modification of existing plants.
On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met. It will be useful for organisations involved in design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants.
