Creep-Resistant Steels
Creep-Resistant Steels

Author: Fujio Abe

Publisher: Elsevier

Published: 2008-03-14

Total Pages: 701

ISBN-13: 1845694015

DOWNLOAD EBOOK

Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors

Structural Alloys for Power Plants
Structural Alloys for Power Plants

Author: A. Shirzadi

Publisher: Elsevier

Published: 2014-07-30

Total Pages: 519

ISBN-13: 0857097555

DOWNLOAD EBOOK

Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.

Creep and Fracture in High Temperature Components
Creep and Fracture in High Temperature Components

Author: European Creep Collaborative Committee

Publisher: DEStech Publications, Inc

Published: 2005

Total Pages: 1136

ISBN-13: 9781932078497

DOWNLOAD EBOOK

Provides information from around the world on creep in multiple high-temperature metals, alloys, and advanced materials.

Welding Steels Without Hydrogen Cracking
Welding Steels Without Hydrogen Cracking

Author: Norman Bailey

Publisher: Woodhead Publishing

Published: 1993-08-03

Total Pages: 306

ISBN-13: 9781855730144

DOWNLOAD EBOOK

A comprehensive guide to avoiding hydrogen cracking which serves as an essential problem-solver for anyone involved in the welding of ferritic steels. The authors provide a lucid and thorough explanation of the theoretical background to the subject but the main emphasis throughout is firmly on practice.

Austenitic Stainless Steels
Austenitic Stainless Steels

Author: Wojciech Borek

Publisher: BoD – Books on Demand

Published: 2017-12-20

Total Pages: 219

ISBN-13: 9535137018

DOWNLOAD EBOOK

Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.

Fundamentals of Creep in Metals and Alloys
Fundamentals of Creep in Metals and Alloys

Author: Michael E. Kassner

Publisher: Elsevier

Published: 2004-04-06

Total Pages: 289

ISBN-13: 0080532144

DOWNLOAD EBOOK

* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Creep and High Temperature Deformation of Metals and Alloys
Creep and High Temperature Deformation of Metals and Alloys

Author: Stefano Spigarelli

Publisher: MDPI

Published: 2019-12-12

Total Pages: 212

ISBN-13: 3039218786

DOWNLOAD EBOOK

By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.

9-12Cr Heat-Resistant Steels
9-12Cr Heat-Resistant Steels

Author: Wei Yan

Publisher: Springer

Published: 2015-05-27

Total Pages: 223

ISBN-13: 3319148397

DOWNLOAD EBOOK

With China becoming a major force in steel research and development, this book highlights the work of a group from the Chinese Academy of Sciences, led by the first four authors. This group has the ideal knowledge base for writing this updated book on heat-resistant steels. The fifth author, Sha, based in the UK, has been collaborating with the Chinese group since 2009 and is the lead or sole author of four research books, all published in English. The last book, “Steels: from materials science to structural engineering,” was published by Springer in 2013. Within two months of its publication, researchers at the University of Science and Technology Liaoning had requested translation of the book into Chinese. Springer obliged, and the Chinese version was published by the Metallurgical Industry Press, Beijing, in August 2014. Sha has organized and completed the writing of the proposed book, though the main research was done in China.

High Nitrogen Steels
High Nitrogen Steels

Author: Valentin G. Gavriljuk

Publisher: Springer Science & Business Media

Published: 2013-04-17

Total Pages: 386

ISBN-13: 3662037602

DOWNLOAD EBOOK

Basic research and new manufacturing methods have led to high nitrogen steels (HNS), a promising new group of materials for use in advanced applications in mechanical and chemical engineering. The book deals with the atomic structure, constitution, properties, manufacturing and application of martensitic, austenitic, duplex and dualphase steels of superior strength and corrosion resistance. Combining metallurgy and engineering aspects. It gives a detailed overview and presents new results on HNS. The book is intended for scientists as well as technologists, who will find stimulating information.