As the manufacture of new toxic pharmaceutical products grows, it is necessary to handle more compounds of increasing toxicity in the workplace. For this reason, and because the expectation of better employee protection and improved working procedures is growing, there is an increasing demand for better containment systems and a better understanding of those systems.
The most comprehensive design reference available on remediation techniques, waste disposal methods and various waste containment systems. Covers several important new issues such as the regulatory structure of RCRA Subtitles C and D; subsurface flow and transport of contaminants; liner systems, leachate collection and removal systems for landfills; and seismic stability analysis of landfills. Describes new waste stabilization technologies including the process of converting non-solid toxic waste into inert solids.
This Safety Guide provides recommendations on meeting the requirements of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1) relevant to reactor containment and associated systems. The publication addresses the containment structure and the systems with the functions of isolation, control and management of mass and energy releases, control and limitation of radioactive releases, and control and management of combustible gases. The Safety Guide is intended for use primarily for land based, stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat generating applications, such as for district heating or desalination.
A concise and current treatment of the subject of nuclear power safety, this work addresses itself to such issues of public concern as: radioactivity in routine effluents and its effect on human health and the environment, serious reactor accidents and their consequences, transportation accidents involving radioactive waste, the disposal of radioactive waste, particularly high-level wastes, and the possible theft of special nuclear materials and their fabrication into a weapon by terrorists. The implementation of the defense-in-depth concept of nuclear power safety is also discussed. Of interest to all undergraduate and graduate students of nuclear engineering, this work assumes a basic understanding of scientific and engineering principles and some familiarity with nuclear power reactors
Describes the state-of-the-art techniques and methods involved in the design, operation, preparation and containment of bioreactor systems, taking into account the interrelated effects of variables associated with both upstream and downstream stages of the design process. The importance of the initial steps in the development of a bioprocess, such as strain and media selection, that have an overwhelming influence on all further operations, is emphasized.;This work is intended for biochemical, chemical and bioprocess engineers; biotechnologists; industrial biochemists; micro- and molecular biologists; food scientists; and upper-level undergraduate and graduate students in these disciplines.
Huge Treasury of Double Containment Piping Data Handbook of Double Containment Piping Systems, by Christopher G. Ziu, arms you with all the data you need for designing and planning virtually every type of double containment system--with complete confidence. Packed with the latest concepts, engineering issues, and rules of design and installation, it takes you step-bystep through construction of both under and aboveground systems--serving up plenty of real-world examples and highly detailed illustrations--so you can ensure optimal performance under even the harshest conditions. You'll have everything you need for: layout, thermal expansion, and structural considerations; fabrication, assembly, and erection; leak detection; inspection, examination, and testing; trenchless reconstruction and alternatives to double containement piping; associated storage tanks and pressure vessels; fluid dynamics and sizing criteria; design of primary metallic, nonmetallic, and secondary containment components; system selection; materials; heat transfer.
President Carter's 1980 declaration of a state of emergency at Love Canal, New York, recognized that residents' health had been affected by nearby chemical waste sites. The Resource Conservation and Recovery Act, enacted in 1976, ushered in a new era of waste management disposal designed to protect the public from harm. It required that modern waste containment systems use "engineered" barriers designed to isolate hazardous and toxic wastes and prevent them from seeping into the environment. These containment systems are now employed at thousands of waste sites around the United States, and their effectiveness must be continually monitored. Assessment of the Performance of Engineered Waste Containment Barriers assesses the performance of waste containment barriers to date. Existing data suggest that waste containment systems with liners and covers, when constructed and maintained in accordance with current regulations, are performing well thus far. However, they have not been in existence long enough to assess long-term (postclosure) performance, which may extend for hundreds of years. The book makes recommendations on how to improve future assessments and increase confidence in predictions of barrier system performance which will be of interest to policy makers, environmental interest groups, industrial waste producers, and industrial waste management industry.
OSHA (29 CFR 1910.119) has recognized AIChE/DIERS two-phase flow publications as examples of "good engineering practice" for process safety management of highly hazardous materials. The prediction of when two-phase flow venting will occur, and the applicability of various sizing methods for two-phase vapor-liquid flashing flow, is of particular interest when designing emergency relief systems to handle runaway reactions. This comprehensive sourcebook brings together a wealth of information on methods that can be used to safely size emergency relief systems for two-phase vapor-liquid flow for flashing or frozen, viscous or nonviscous fluids. Design methodologies are illustrated by selected sample problems. Written by industrial experts in the safety field, this book will be invaluable to those charged with operating, designing, or managing today's and tomorrow's chemical process industry facilities.
Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. - The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed - Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station - Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)