Proceedings of the sixth International Conference on Composite Construction in Steel and Concrete held at the Devil s Thumb Ranch in Tabernash, Colorado, July 20 24, 2008. Sponsored by Engineering Conferences International; the Structural Engineering Institute of ASCE. This collection contains the 63 technical papers representing the state-of-the-art in composite construction worldwide. Topics include: composite bridges, composite slabs, shear connectors, composite columns, innovative composite structural systems, fire and seismic resistance of composite structural systems and practical applications. These papers will be valuable to structural engineers and allied professionals engaged in construction with steel and concrete composites.
Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.
This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.
This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.
High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete
The constant need for cost-effective structural forms has led to the increasing use of composite construction, and a substantial amount of research effort is currently being spent in developing techniques for combining concrete and steel effectively. Significant economies in this form of construction have been observed, especially in bridges and building floors. Codes of Practice on composite construction are being revised in the UK and in Europe, in the light of the substantial amount of knowledge that has been generated in recent years. An International Conference organised by the Department of Civil and Structural Engineering, University College, Cardiff, UK, with the specific objective of discussing all types of metal structures in an integrated way, provided a forum for the dissemination of new concepts and for reviewing developments; the expectations of the organisers have been amply justified and exceeded by the level of international response to the call for papers. This volume contains 17 papers on composite steel structures, presented at the Conference, many of which were by well-known experts in their respective fields.
