The objective of this report is to identify significant ageing mechanisms and degradation locations, as well as to document current practices for the assessment and management of the ageing of boiling water reactor (BWR) pressure vessel internals (RPVIs). The report emphasizes safety aspects and also provides information on current inspections as well as on monitoring and mitigation practices for managing ageing of BWR RPVs.
Sustainability of Life Cycle Management for Nuclear Cementation-Based Technologies, edited by Dr. Rahman and Dr. Ojovan, presents the latest knowledge and research on the management of cementitious systems within nuclear power plants. The book covers aging, development and updates on regulatory frameworks on a global scale, the development of cementitious systems for the immobilization of problematic wastes, and the decommissioning and decontamination of complex cementitious systems. The book's editors and their team of experts combine their practical knowledge to provide the reader with a thorough understanding on the sustainability of lifecycle management of cementitious systems within the nuclear industry. Sections provide a comparative tool that presents national regulations concerning cementitious systems within nuclear power plants, check international and national evaluation results of the sustainability of different systems, help in the development of performance test procedures, and provide a guide on aging nuclear power plants and the long-term behavior of these systems in active and passive safety environments. - Presents the latest information on the behavior of different cementitious systems used in the nuclear industry in one comprehensive resource - Includes scientific justifications of system behavior during the design, operation, maintenance and decommissioning phases - Aids the reader in the development of evaluation tests for problematic wastes
The main outcomes of RILEM TC-226-CNM are summarized in this book. Key input was provided by researchers from countries that are main contributors in the R&D, design, construction, operation, and regulation of waste nuclear reinforced concrete facilities. Nuclear power plants and many of the facilities and structures used for the management of radioactive waste materials generated by the fuel cycle use concrete in their construction. RILEM TC 226 CNM covered several areas including functional and performance requirements for concrete structures; degradation processes; phenomenological modelling, field experiences, tests approaches, instrumentation and monitoring methods dedicated to performance assessments; service-life models; aging Management of Nuclear Power Plants, repair techniques; codes and standards specific to radioactive waste facilities.
This publication is one in a series of reports on the assessment and management of ageing of major nuclear power plant (NPP) components. Current practices for assessment of safety margins (fitness for service) and inspection, monitoring and mitigation of ageing related degradation of selected concrete structures related to NPPs are documented. Implications for and differences in new reactor designs are discussed. This information is intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues.
This book provides a general introduction to the topic of buildings for resistance to the effects of abnormal loadings. The structural design requirements for nuclear facilities are very unique. In no other structural system are extreme loads such as tornadoes, missile and loud interaction, earthquake effects typical in excess of any recorded historical data at a site, and postulated system accident at very low probability range explicitly, considered in design. It covers the whole spectrum of extreme load which has to be considered in the structural design of nuclear facilities and reactor buildings, the safety criteria, the structural design, the analysis of containment. Test case studies are given in a comprehensive treatment. Each major section contains a full explanation which allows the book to be used by students and practicing engineers, particularly those facing formidable task of having to design complicated building structures with unusual boundary conditions.
Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
This publication provides an overview of the various plant life management (PLiM) methodologies, technologies and processes to ensure long term operation of heavy water reactors (HWRs). Implementation of a systematic and comprehensive PLiM programme, such as that outlined in the publication, goes a long way towards meeting the overall goal of HWR owners and operators to successfully achieve design life and continued operation. Included in this publication are technical aspects of HWR PLiM, component specific technology considerations for condition assessment, an example of a proactive ageing management programme, and Ontario power generation experiences. Country reports from Argentina, Canada, India, the Republic of Korea and Romania are attached in an annex in order to share practices and experiences of PLiM programmes.
