A Practical Approach to Scientific Molding
Author: Gary F. Schiller
Publisher:
Published: 2024-01-19
Total Pages: 0
ISBN-13: 9781569902035
DOWNLOAD EBOOKPosts
Plastic Part Design for Injection Molding
Author: Robert A. Malloy
Publisher:
Published: 2011
Total Pages: 549
ISBN-13: 9783446404687
DOWNLOAD EBOOKThe goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.
Robust Process Development and Scientific Molding
Author: Suhas Kulkarni
Publisher: Carl Hanser Verlag GmbH Co KG
Published: 2017-01-16
Total Pages: 393
ISBN-13: 1569905878
DOWNLOAD EBOOKThe book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.
Injection Molding Advanced Troubleshooting Guide
Author: Randy Kerkstra
Publisher:
Published: 2021-04-09
Total Pages: 523
ISBN-13: 9781569908341
DOWNLOAD EBOOKThis highly practical troubleshooting guide solves problems at the machine systematically and quickly. Drawing on a wealth of hands-on experience from the authors, who have built strong reputations in the field, the book is structured by type of problem/solution. Thus, it is an ideal reference to be consulted at the machine. Included is valuable information on robust process windows, cycle time evaluations, scrap savings, and runners/gates with no existing standard in the industry. No other book provides the unique insights found here.
Practical Guide To Injection Blow Molding
Author: Samuel L. Belcher
Publisher: CRC Press
Published: 2007-03-05
Total Pages: 182
ISBN-13: 1420014811
DOWNLOAD EBOOKTaking a straight-forward approach, the Practical Guide to Injection Blow Molding explores the entire industry from conception, design, costing, tooling, and machinery, to trouble-shooting, testing, and daily production. With information for both the novice investor and the plastic industry expert, this concise text is reinforced with pictures, charts, and figures. The author, a highly knowledgeable industry insider, and a member ofThe Plastics Hall of Fame, discusses the history of the industry, as well as its daily workings. He instructs in product and tooling design, as well as material and machine selection, explaining advantages and disadvantages, elaborating on efficiencies that can be realized.
Molding Simulation: Theory and Practice
Author: Maw-Ling Wang
Publisher: Carl Hanser Verlag GmbH Co KG
Published: 2018-06-11
Total Pages: 584
ISBN-13: 1569907323
DOWNLOAD EBOOKThis practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in full color. The book is conceptually divided into three parts: Chapters 1–5 introduce the fundamentals of injection molding, focusing the factors governing molding quality and how molding simulation methodology is developed. As they are essential to molding quality, the rheological, thermodynamic, thermal, mechanical, kinetic properties of plastics are fully elaborated in this part, as well as curing kinetics for thermoset plastics. Chapters 6–11 introduce CAE verification of design, a valuable tool for both part and mold designers toward avoiding molding problems in the design stage and to solve issues encountered in injection molding. This part covers design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12–17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-Injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding, and integrated circuit packaging. The authors come from the creative simulation team at CoreTech System (Moldex3D), winner of the PPS James L. White Innovation Award 2015. Several CAE case study exercises for execution in the Moldex3D software are included to allow readers to practice what they have learned and test their understanding.
Handbook of Plastic Processes
Author: Charles A. Harper
Publisher: John Wiley & Sons
Published: 2006-05-26
Total Pages: 755
ISBN-13: 0471786578
DOWNLOAD EBOOKAn outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Plastics Injection Molding
Author: José R. Lerma Valero
Publisher:
Published: 2019-12-09
Total Pages: 350
ISBN-13: 9781569906897
DOWNLOAD EBOOKPlastics Injection Molding: Scientific Molding, Recommendations, and Best Practices is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. It includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials.
Introduction to Plastics Engineering
Author: Vijay K. Stokes
Publisher: John Wiley & Sons
Published: 2020-04-02
Total Pages: 1749
ISBN-13: 1119536529
DOWNLOAD EBOOKThe authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.
Injection Molding Troubleshooting Guide, 3rd Ed.
Author: Jay W. Carender
Publisher: Createspace Independent Publishing Platform
Published: 2011-11-04
Total Pages: 0
ISBN-13: 9781466414341
DOWNLOAD EBOOKThe IM Troubleshooting Guide was originally prepared in 1996 as a 48 page convenient pocket sized resource for use in Injection Molding. This information is most useful by personnel who work in the injection molding field including press operators, technicians, engineers, etc. This 3rd ED is at 104 pages and includes selected extra pages from other APEBOOKS that are helpful in process set up and troubleshooting.This book includes many useful definitions and tips for troubleshooting molding problems -- both process and tooling related. The book was written based on many years of process engineering. The solutions for correcting process problems are listed in the best order to solve the problem based on factors such as ease & timeliness to perform versus cost to implement and always considering effectiveness to solve problem. It is also useful to identify a common set of definitions for each department to use when discussing these common molding defects. Tips are often provided as to which defects may be process correctable versus those requiring product or mold changes.An introduction to DOE and dimensional nominalization is made, but discussed in greater detail in some of the other booklets written by this author for injection molding ... these are listed later in this book ... a total of six books have been written for injection molding.
