3D Concrete Printing Technology
3D Concrete Printing Technology

Author: Jay G. Sanjayan

Publisher: Butterworth-Heinemann

Published: 2019-02-15

Total Pages: 451

ISBN-13: 0128154829

DOWNLOAD EBOOK

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

3D Printing of Concrete
3D Printing of Concrete

Author: Arnaud Perrot

Publisher: John Wiley & Sons

Published: 2019-04-30

Total Pages: 176

ISBN-13: 1786303418

DOWNLOAD EBOOK

The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.

Second RILEM International Conference on Concrete and Digital Fabrication
Second RILEM International Conference on Concrete and Digital Fabrication

Author: Freek P. Bos

Publisher: Springer Nature

Published: 2020-07-08

Total Pages: 1209

ISBN-13: 3030499162

DOWNLOAD EBOOK

This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

High Tech Concrete: Where Technology and Engineering Meet
High Tech Concrete: Where Technology and Engineering Meet

Author: D.A. Hordijk

Publisher: Springer

Published: 2017-06-08

Total Pages: 2926

ISBN-13: 3319594710

DOWNLOAD EBOOK

This book contains the proceedings of the fib Symposium “High Tech Concrete: Where Technology and Engineering Meet”, that was held in Maastricht, The Netherlands, in June 2017. This annual symposium was organised by the Dutch Concrete Association and the Belgian Concrete Association. Topics addressed include: materials technology, modelling, testing and design, special loadings, safety, reliability and codes, existing concrete structures, durability and life time, sustainability, innovative building concepts, challenging projects and historic concrete, amongst others. The fib (International Federation for Structural Concrete) is a not-for-profit association committed to advancing the technical, economic, aesthetic and environmental performance of concrete structures worldwide.

Printing Architecture
Printing Architecture

Author: Ronald Rael

Publisher: Chronicle Books

Published: 2018-05-22

Total Pages: 179

ISBN-13: 1616897473

DOWNLOAD EBOOK

Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition to case studies and illustrations of their own work, Rael and San Fratello offer guidance for sourcing alternative materials, specific recipes for mixing compounds, and step-by-step instructions for conducting bench tests and setting parameters for material testing, to help readers to understand the process of developing powder-based materials and their unique qualities.

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018

Author: Timothy Wangler

Publisher: Springer

Published: 2018-08-29

Total Pages: 356

ISBN-13: 3319995197

DOWNLOAD EBOOK

Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Sustainability for 3D Printing
Sustainability for 3D Printing

Author: Kamalpreet Sandhu

Publisher: Springer Nature

Published: 2021-08-31

Total Pages: 194

ISBN-13: 3030752356

DOWNLOAD EBOOK

With advancement in modern technology human life span in 21st century has significantly improved as compared to past centuries. Indeed, the manufacturing and household wastes have also boosted in the same era, presenting a hazardous condition to the various living beings. However, through smart methodologies, it can be possible to recycle/reuse of the different types of wastes as a feedstock convenient for specialized manufacturing technologies, such as 3D printing. This means that through proper facilities the waste can be used as the raw material for the printing technologies with characteristic at par with the virgin feedstock. Furthermore, producing the feedstock using waste materials will help to reduce the cost of the processing material, productivity and eco-friendliness of this manufacturing technology. This book will cover a boarder aspect of such efforts wherein various applications and state of art solutions will be discussed in a comprehensive way. This book will be much interest for academics, research and entrepreneur who are working in the field materials science, 3D printing, and manufacturing because of its coverage of state of art solution in the field of commercial, industrial and healthcare products.

3D Printing with Biomaterials
3D Printing with Biomaterials

Author: A.J.M. van Wijk

Publisher: IOS Press

Published: 2015-01-15

Total Pages: 86

ISBN-13: 1614994862

DOWNLOAD EBOOK

Additive manufacturing or 3D printing, manufacturing a product layer by layer, offers large design freedom and faster product development cycles, as well as low startup cost of production, on-demand production and local production. In principle, any product could be made by additive manufacturing. Even food and living organic cells can be printed. We can create, design and manufacture what we want at the location we want. 3D printing will create a revolution in manufacturing, a real paradigm change. 3D printing holds the promise to manufacture with less waste and energy. We can print metals, ceramics, sand, synthetic materials such as plastics, food or living cells. However, the production of plastics is nowadays based on fossil fuels. And that’s where we witness a paradigm change too. The production of these synthetic materials can be based also on biomaterials with biomass as feedstock. A wealth of new and innovative products are emerging when we combine these two paradigm changes: 3D printing and biomaterials. Moreover, the combination of 3D printing with biomaterials holds the promise to realize a truly sustainable and circular economy.

Digital Fabrication with Cement-Based Materials
Digital Fabrication with Cement-Based Materials

Author: Nicolas Roussel

Publisher: Springer Nature

Published: 2022-01-12

Total Pages: 242

ISBN-13: 3030905357

DOWNLOAD EBOOK

This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.

Impact: Design With All Senses
Impact: Design With All Senses

Author: Christoph Gengnagel

Publisher: Springer Nature

Published: 2019-08-28

Total Pages: 802

ISBN-13: 3030298299

DOWNLOAD EBOOK

This book reflects and expands on the current trend in the building industry to understand, simulate and ultimately design buildings by taking into consideration the interlinked elements and forces that act on them. Shifting away from the traditional focus, which was exclusively on building tasks, this approach presents new challenges in all areas of the industry, from material and structural to the urban scale. The book presents contributions including research papers and case studies, providing a comprehensive overview of the field as well as perspectives from related disciplines, such as computer science. The chapter authors were invited speakers at the 7th Symposium “Impact: Design With All Senses”, which took place at the University of the Arts in Berlin in September 2019.