Welding Technology and Design
Welding Technology and Design

Author: V.M. Radhakrishnan

Publisher: New Age International

Published: 2005

Total Pages: 66

ISBN-13: 8122416721

DOWNLOAD EBOOK

This Book Deals With Welding Methodology And Design Aspects Of Welding. The First Chapter Explains The Different Welding Methods While The Second One Describes The Necessary Welding Metallurgy Aspects Of The Material. Basics Of Strength Of Materials And Fracture Mechanics Are Presented In Chapter 3. The Problems Of Residual Stress And Distortion Are Discussed In Chapter 4. Fatigue And High Temperature Creep Are Frequently Encountered In Welded Components And So Are Discussed In Chapters 5 And 6. Design Of Tubular Joints And Pressure Vessels Is Detailed In Chapter 7. Defects, Their Causes And Remedial Measures And Welding Codes And Tests Are Given In Chapters 8 And 9, Respectively. Design Of Some Typical Joints Is Presented In Chapter 10. The Appendix Provides Typical Questions And Design Problems.The Book Will Be Very Useful To Undergraduate And Postgraduate Students Of Metallurgical, Mechanical And Production Engineering. It Will Also Be Useful To Welding Design Engineers And Can Be Used As An Authentic Reference Source.

Maraging Steels
Maraging Steels

Author: W Sha

Publisher: Elsevier

Published: 2009-10-26

Total Pages: 216

ISBN-13: 184569693X

DOWNLOAD EBOOK

Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels

Metallurgy of Welding
Metallurgy of Welding

Author: J. F. Lancaster

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 267

ISBN-13: 940109506X

DOWNLOAD EBOOK

This book is intended, like its predecessor (The metallurgy of welding, brazing and soldering), to provide a textbook for undergraduate and postgraduate students concerned with welding, and for candidates taking the Welding Institute examinations. At the same time, it may prove useful to practising engineers, metallurgists and welding engineers in that it offers a resume of information on welding metallurgy together with some material on the engineering problems associated with welding such as reliability and risk analysis. In certain areas there have been developments that necessitated complete re-writing of the previous text. Thanks to the author's colleagues in Study Group 212 of the International Institute of Welding, understanding of mass flow in fusion welding has been radically transformed. Knowledge of the metallurgy of carbon and ferritic alloy steel, as applied to welding, has continued to advance at a rapid pace, while the literature on fracture mechanics accumulates at an even greater rate. In other areas, the welding of non-ferrous metals for example, there is little change to report over the last decade, and the original text of the book is only slightly modified. In those fields where there has been significant advance, the subject has become more quantitative and the standard of math ematics required for a proper understanding has been raised.

Welding High-strength Steels
Welding High-strength Steels

Author: P. A. Kammer

Publisher:

Published: 1966

Total Pages: 68

ISBN-13:

DOWNLOAD EBOOK

Recent studies of the developments in welding steels with yield strengths greater than 150 ksi have included low-alloy martensitic steels, medium-alloy martensitic steels, nickel maraging steels, and bainitic steels. Only weldments from medium-alloy martensitic steels and nickel maraging steels have mechanical properties approaching those of the base plate without a complete postweld heat treatment. The most serious problem with the other steel is low toughness in the weld fusion zone. Adequate weld metal toughness under conditions of elastic strain can be obtarined over the entire 150 to 225 ksi yield-strength range only if the tungsten-arc welding process is used. Processes with higher deposition rates can produce comparable weld deposits only in the lower portion of the range. Above a yield strength of 200 ksi, 18Ni maraging steel weldments have the best combination of strength and toughness. Below 200 ksi, the HP 9-4-25 medium-alloy martensitic steel and 12Ni maraging steel weldments have nearly equal properties.

2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering
2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering

Author: Mokhtar Awang

Publisher: Springer

Published: 2017-04-28

Total Pages: 128

ISBN-13: 9811042322

DOWNLOAD EBOOK

This volume presents selected papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2016) which was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia. The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors. It discusses the findings of experimental and numerical works from soldering, arc welding to solid state joining technology that faced by current industry.

The Metallurgy, Behavior, and Application of the 18-percent Nickel Maraging Steels A Survey
The Metallurgy, Behavior, and Application of the 18-percent Nickel Maraging Steels A Survey

Author: A. M. Hall

Publisher:

Published: 1968

Total Pages: 148

ISBN-13:

DOWNLOAD EBOOK

This report resulted from a survey of users and manufacturers of maraging steels, Government agencies, research institutions, and published literature. It presents the technical status of the 18-percent nickel maraging steels in detail and brings together a large body of knowledge with regard to the metallurgical and engineering aspects of maraging steels. Since such steels were first announced in 1959, they have become highly important in aerospace, defense, and industrial work. The requirements of the National Aeronautics and Space Administration have given impetus to their development, and research now underway is expected to result in further improvements and applicability. The NASA Office of Technology Utilization sponsored this report as part of its program to disseminate information on technological developments which appear to be useful for general industrial applications.

Multiaxial Fatigue
Multiaxial Fatigue

Author: Darrell Socie

Publisher: SAE International

Published: 1999-12-15

Total Pages: 510

ISBN-13: 0768065100

DOWNLOAD EBOOK

This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.