This is an indespensible guide to both researchers in academia and industry who wish to perform tribological experiments more effectively. With an extensive range of illustrations which communicate the basic concepts in experimental methods tribology more effectively than text alone. An extensive citation list is also provided at the end of each chapter facilitating a more thorough navigation through a particular subject. * Contains extensive illustrations* Highlights limitations of current techniques
Efficient numerical solution of realistic and, therefore, complex equation systems occupies many researchers in many disciplines. For various reasons, but mainly in order to approximate reality, a very large number of unknowns are needed. Using classical techniques, the solution of such a system of equations would take too long, and so sometimes MultiLevel techniques are used to accelerate convergence. Over the last one and a half decades, the authors have studied the problem of Elastohydrodynamic Lubrication, governed by a complex integro-differential equation. Their work has resulted in a very efficient and stable solver. In this book they describe the different intermediate problems analyzed and solved, and how those ingredients finally come together in the EHL solver. A number of these intermediate problems, such as Hydrodynamic Lubrication and Dry Contact, are useful in their own right. In the Appendix the full codes of the Poisson problem, the Hydrodynamic Lubrication problem, the dry contact solver and the EHL solver are given. These codes are all written in 'C' language, based on the 'ANSI-C' version.
This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear.The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.
Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as: • the dynamic behaviour of plain and tilting-pads • the thermal aspects • the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation • the effects of inertia • the appearance of Taylor's vortices and of turbulence and their repercussions. The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions. Hydrodynamic Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.
In spite of the practical importance of the friction, wear and lubrication of elastomers, limited literature is available on this topic. Addressing these needs, this book will give readers a complete understanding of rubber tribology and the key developments in this field over the last ten years. For the first time new and important achievements such as theories of rubber abrasion and surfacial mechanochemical effects of rubber wear are presented. The book pays special attention to the principles of rubber wear – a clear understanding of which is essential for those striving towards further increasing the working life of rubber. * Comprehensively and systematically covers main points of rubber tribology * The original choice of contents informs readers of the latest developments in the field*Meeting the needs of various readers - researchers, engineers, technicians, graduates
Insightful working knowledge of friction, lubrication, and wear in machines Applications of tribology are widespread in industries ranging from aerospace, marine and automotive to power, process, petrochemical and construction. With world-renowned expert co-authors from academia and industry, Applied Tribology: Lubrication and Bearing Design, 3rd Edition provides a balance of application and theory with numerous illustrative examples. The book provides clear and up-to-date presentation of working principles of lubrication, friction and wear in vital mechanical components, such as bearings, seals and gears. The third edition has expanded coverage of friction and wear and contact mechanics with updated topics based on new developments in the field. Key features: Includes practical applications, homework problems and state-of-the-art references. Provides presentation of design procedure. Supplies clear and up-to-date information based on the authors’ widely referenced books and over 500 archival papers in this field. Applied Tribology: Lubrication and Bearing Design, 3rd Edition provides a valuable and authoritative resource for mechanical engineering professionals working in a wide range of industries with machinery including turbines, compressors, motors, electrical appliances and electronic components. Senior and graduate students in mechanical engineering will also find it a useful text and reference.
This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.
This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
These papers represent the proceedings from the 29th Leeds-Lyon Symposium on Tribology, 'Tribological Research and Design for Engineering Systems' which was held in September 2002. Over 130 delegates from 18 countries attended the symposium, and the extensive discussions generated over 150 written questions and responses, which are documented at the end of this proceedings volume. There have been many advances in the field of tribology in recent years, with progress being made in the engineering and interaction of surfaces; micro and nano-tribology; elastohydrodynamics; surface films; surface texture; tribochemistry; wear and life prediction; with both experimental and theoretical contributions. These advances were reviewed, and the impact of this understanding on the fundamentals upon total engineering activity in design, manufacture and machine operation were considered. Readership: Scientists and researchers in the field of tribology.
