Tribology of Metal Cutting
Tribology of Metal Cutting

Author: Viktor P. Astakhov

Publisher: Elsevier

Published: 2006-12-18

Total Pages: 451

ISBN-13: 0080466850

DOWNLOAD EBOOK

Tribology of Metal Cutting deals with the emerging field of studies known as Metal Cutting Tribology. Tribology is defined as the science and technology of interactive surfaces moving relative each other. It concentrates on contact physics and mechanics of moving interfaces that generally involve energy dissipation. This book summarizes the available information on metal cutting tribology with a critical review of work done in the past. The book covers the complete system of metal cutting testing. In particular, it presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. It also describes the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. Specialists in the field of metal cutting will find information on how to apply the major principles of metal cutting tribology, or, in other words, how to make the metal cutting tribology to be useful at various levels of applications. The book discusses other novel concepts and principles in the tribology of metal cutting such as the energy partition in the cutting system; versatile metrics of cutting tool wear; optimal cutting temperature and its use in the optimization of the cutting process; the physical concept of cutting tool resource; and embrittlement action. This book is intended for a broad range of readers such as metal cutting tool, cutting insert, and process designers; manufacturing engineers involved in continuous process improvement; research workers who are active or intend to become active in the field; and senior undergraduate and graduate students of manufacturing. · Introduces the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system.· Presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool.· Covers the complete system of metal cutting testing.

Measurement in Machining and Tribology
Measurement in Machining and Tribology

Author: J. Paulo Davim

Publisher: Springer

Published: 2018-12-29

Total Pages: 159

ISBN-13: 303003822X

DOWNLOAD EBOOK

This book presents the research advances in the science of measurement, giving special focus to the field of machining and tribology. Topics such as dimensional metrology, precision measurements, industrial metrology, accuracy and precision in measurement are covered. Also theoretical aspects such as modelling and simulation are highlighted.

Mechanical Tribology
Mechanical Tribology

Author: George E. Totten

Publisher: CRC Press

Published: 2004-04-22

Total Pages: 512

ISBN-13: 9780203970911

DOWNLOAD EBOOK

Studying the morphology, defects, and wear behavior of a variety of material surfaces, Mechanical Tribology examines popular and emerging surface characterization techniques for assessment of the physical, mechanical, and chemical properties of various modified surfaces, thin films, and coatings. Its chapters explore a wide range of tribolo

Tribology: Friction and Wear of Engineering Materials
Tribology: Friction and Wear of Engineering Materials

Author: Hutchings

Publisher: Springer

Published: 1992

Total Pages: 292

ISBN-13:

DOWNLOAD EBOOK

Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations

Tribology in Manufacturing Technology
Tribology in Manufacturing Technology

Author: J. Paulo Davim

Publisher: Springer Science & Business Media

Published: 2012-09-14

Total Pages: 201

ISBN-13: 3642316832

DOWNLOAD EBOOK

This book aims to show how tribological concepts can be applied in order to improve manufacturing technology in modern industry. It can be used as a guide book for engineering students or a reference useful for academics in the fields of tribology, manufacturing, materials and mechanical engineering.

Advanced Machining Processes of Metallic Materials
Advanced Machining Processes of Metallic Materials

Author: Wit Grzesik

Publisher: Elsevier

Published: 2016-11-15

Total Pages: 610

ISBN-13: 0444637206

DOWNLOAD EBOOK

Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Machining Difficult-to-Cut Materials
Machining Difficult-to-Cut Materials

Author: Hossam A. Kishawy

Publisher: Springer

Published: 2018-08-09

Total Pages: 253

ISBN-13: 3319959662

DOWNLOAD EBOOK

This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.

Metal Cutting Technologies
Metal Cutting Technologies

Author: J. Paulo Davim

Publisher: Walter de Gruyter GmbH & Co KG

Published: 2016-09-26

Total Pages: 334

ISBN-13: 3110449471

DOWNLOAD EBOOK

Metal cutting is a science and technology of great interest for several important industries, such as automotive, aeronautics, aerospace, moulds and dies, biomedicine, etc. Metal cutting is a manufacturing process in which parts are shaped by removal of unwanted material. The interest for this topic increased over the last twenty years, with rapid advances in materials science, automation and control, and computers technology. The present volume aims to provide research developments in metal cutting for modern industry. This volume can be used by students, academics, researchers, and engineering professionals in mechanical, manufacturing, and materials industries. THE SERIES: ADVANCED MECHANICAL ENGINEERING Currently, it is possible to defi ne mechanical engineering as the branch of engineering that “involves the application of principles of physics and engineering for the design, manufacturing, automation and maintenance of mechanical systems”. Mechanical Engineering is closely related to a number of other engineering disciplines. This series fosters information exchange and discussion on all aspects of mechanical engineering with a special emphasis on research and development from a number of perspectives including (but not limited to) materials and manufacturing processes, machining and machine tools, tribology and surface engineering, structural mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. In addition, the series covers the full range of sustainability aspects related with mechanical engineering. Advanced Mechanical Engineering is an essential reference for students, academics, researchers, materials, mechanical and manufacturing engineers and professionals in mechanical engineering.

Nanolubricants
Nanolubricants

Author: Jean Michel Martin

Publisher: John Wiley & Sons

Published: 2008-04-30

Total Pages: 246

ISBN-13: 0470987707

DOWNLOAD EBOOK

The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Surfactants in Tribology, Volume 3
Surfactants in Tribology, Volume 3

Author: Girma Biresaw

Publisher: CRC Press

Published: 2013-03-20

Total Pages: 597

ISBN-13: 1439889619

DOWNLOAD EBOOK

The manufacture and use of almost every consumer and industrial product rely on application of advanced knowledge in surface science and tribology. These two disciplines are of critical importance in major economic sectors, such as mining, agriculture, manufacturing (including metals, plastics, wood, computers, MEMS, NEMS, appliances), construction