Technology and Use of Lignite
Technology and Use of Lignite

Author:

Publisher:

Published: 1966

Total Pages: 136

ISBN-13:

DOWNLOAD EBOOK

The 1965 Lignite Symposium, the fourth in a series and the third sponsored by the University of North Dakota, and the Bureau of Mines, was held at Bismark, N. Dak., on April 29-30, 1965. These symposia provide a forum for those interested in the technology and utilization of solid fuels, especially lignitic coals. As part of the meeting, a 200-mile field trip was taken including inspection of (1) the 200-metawatt, pulverized lignite-fired Leland Olds plant of Basin Electric Power Cooperative, under construction near Stanton, N. Dak.; (2) the site of the Glenharold mine of the Truax-Traer Coal Co., Division of Consolidation Coal Co., where a wheel excavator was being assembled; (3) the operating Beulah mine of Knife River Coal Mining Co., subsidiary fo Montana Dakota Utilities Co., near Beulah, N. Dak.; and (4) the 400-megawatt, hydroelectric Garrison Dam powerplant, near Garrison, N. Dak. During the technical sessions, 13 papers were presented covering some the recent trends, development, and research in lignite technology. The text of these papers is compiled to provide a record of the symposium and to allow wider dissemination of the information. Proceedings of the previous symposia have been published.

Low-rank Coals for Power Generation, Fuel and Chemical Production
Low-rank Coals for Power Generation, Fuel and Chemical Production

Author: Zhongyang Luo

Publisher: Woodhead Publishing

Published: 2017-06-22

Total Pages: 367

ISBN-13: 0081009291

DOWNLOAD EBOOK

Low-Rank Coals for Power Generation, Fuel and Chemical Production provides a thorough introduction to lignite (brown coal) and subbituminous coals and explores how they can be used efficiently and economically in place of hard coal. The book examines the undesirable characteristics of low-quality coals, such as high moisture content, low calorific value, and aggressive ash characteristics, and the resulting refinements to standard technologies and practices required for successful combustion, gasification, and pyrolysis.The first part of this book provides a comprehensive and systematic review of the properties of low-rank coals and corresponding preparation methods, such as drying, cleaning, and upgrading. Power generation from low-rank coals is the focus of Part 2, with chapter topics ranging from high efficiency pulverized coal combustion and circulatingfluidized bed combustion to emerging areas such as chemical looping and oxyfuel combustion. The final contributions address the important subjects of coal-to-liquids,polygeneration and coke production using low-rank coals, as well as the critical issue of carbon capture and storage.This book is a valuable resource for power generation engineers and researchers seeking to maximize the opportunities provided by these cheaper coal feedstocks for efficient and environmentally compatible power generation. - Presents the most in-depth treatment of low-rank coals available - Addresses both power generation and fuel production - Includes coverage that spans pulverized coal combustion and emerging technologies, such as CFBC, UCG, CLC, and oxyfuel combustion

Coal
Coal

Author: National Research Council

Publisher: National Academies Press

Published: 2007-12-21

Total Pages: 183

ISBN-13: 030911022X

DOWNLOAD EBOOK

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.

Evolutionary and Revolutionary Technologies for Mining
Evolutionary and Revolutionary Technologies for Mining

Author: National Research Council

Publisher: National Academies Press

Published: 2002-03-14

Total Pages: 102

ISBN-13: 0309169836

DOWNLOAD EBOOK

The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.

Proceedings of the 20th International Conference on Fluidized Bed Combustion
Proceedings of the 20th International Conference on Fluidized Bed Combustion

Author: Guangxi Yue

Publisher: Springer Science & Business Media

Published: 2010-07-28

Total Pages: 1186

ISBN-13: 3642026826

DOWNLOAD EBOOK

The proceedings of the 20th International Conference on Fluidized Bed Combustion (FBC) collect 9 plenary lectures and 175 peer-reviewed technical papers presented in the conference held in Xi'an China in May 18-21,2009. The conference was the 20th conference in a series, covering the latest fundamental research results, as well as the application experience from pilot plants, demonstrations and industrial units regarding to the FBC science and technology. It was co-hosted by Tsinghua University, Southeast University, Zhejiang University, China Electricity Council and Chinese Machinery Industry Federation. A particular feature of the proceedings is the balance between the papers submitted by experts from industry and the papers submitted by academic researchers, aiming to bring academic knowledge to application as well as to define new areas for research. The authors of the proceedings are the most active researchers, technology developers, experienced and representative facility operators and manufacturers. They presented the latest research results, state-of-the-art development and projects, and the useful experience. The proceedings are divided into following sections: • CFB Boiler Technology, Operation and Design • Fundamental Research on Fluidization and Fluidized Combustion • C02 Capture and Chemical Looping • Gasification • Modeling and Simulation on FBC Technology • Environments and Pollutant Control • Sustainable Fuels The proceedings can be served as idea references for researchers, engineers, academia and graduate students, plant operators, boiler manufacturers, component suppliers, and technical managers who work on FBC fundamental research, technology development and industrial application.

Renewable Energy
Renewable Energy

Author: Martin Kaltschmitt

Publisher: Springer Science & Business Media

Published: 2007-06-03

Total Pages: 590

ISBN-13: 3540709495

DOWNLOAD EBOOK

The utilisation of renewable energies is not at all new; in the history of mankind renewable energies have for a long time been the primary possibility of generating energy. This only changed with industrial revolution when lignite and hard coal became increasingly more important. Later on, also crude oil gained importance. Offering the advantages of easy transportation and processing also as a raw material, crude oil has become one of the prime energy carriers applied today. Moreover, natural gas used for space heating and power provision as well as a transportation fuel has become increasingly important, as it is abundantly available and only requires low investments in terms of energy conversion facilities. As fossil energy carriers were increasingly used for energy generation, at least by the industrialised countries, the application of renewable energies decreased in absolute and relative terms; besides a few exceptions, renewable energies are of secondary importance with regard to overall energy generation.

Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants
Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants

Author: Augusto Di Gianfrancesco

Publisher: Woodhead Publishing

Published: 2016-09-01

Total Pages: 902

ISBN-13: 008100558X

DOWNLOAD EBOOK

Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies

The Science of Victorian Brown Coal
The Science of Victorian Brown Coal

Author: R.A. Durie

Publisher: Butterworth-Heinemann

Published: 2013-10-22

Total Pages: 767

ISBN-13: 1483162230

DOWNLOAD EBOOK

The Science of Victorian Brown Coal provides extensive information on Victorian brown coal, which is a major fossil fuel resource by any standard and constitutes about 97% of Victoria's recoverable energy reserves. Energy from brown coal has been the mainstay of the Victorian economy, providing low-cost electricity to the state grid, briquettes as a fuel for industry and town gas prior to the discovery of natural gas. Because of the unique properties of the coal, it has been necessary to develop an in-depth scientific knowledge of the coal and its behavior, as well as innovative technologies for its effective utilization. The economic benefit brown coal has provided to Victoria is demonstrated throughout the chapters. This book aims to provide the springboard for further research and lead to a new era in the development of value-added products and the more efficient utilization of this major resource. This text is a useful reference for students or individuals conducting research on fossil fuel energy, specifically on brown coals.