Surface Modification and Alloying
Surface Modification and Alloying

Author: J.M. Poate

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 413

ISBN-13: 146133733X

DOWNLOAD EBOOK

This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.

Surface Modification and Alloying
Surface Modification and Alloying

Author: J.M. Poate

Publisher: Springer

Published: 1983-06-01

Total Pages: 0

ISBN-13: 9780306413735

DOWNLOAD EBOOK

This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.

Laser Surface Modification of Alloys for Corrosion and Erosion Resistance
Laser Surface Modification of Alloys for Corrosion and Erosion Resistance

Author: C T Kwok

Publisher: Elsevier

Published: 2012-03-20

Total Pages: 401

ISBN-13: 0857095838

DOWNLOAD EBOOK

Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components

Surface Processing of Light Alloys Subject to Concentrated Energy Flows
Surface Processing of Light Alloys Subject to Concentrated Energy Flows

Author: Xizhang Chen

Publisher: Springer Nature

Published: 2021-01-22

Total Pages: 227

ISBN-13: 9813342285

DOWNLOAD EBOOK

This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. It also describes and analyzes the physical mechanism of energy actions of these technologies on physical and mechanical properties and discusses their potential use in industry to improve the characteristics of finished products. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.

Laser Surface Modification and Adhesion
Laser Surface Modification and Adhesion

Author: K. L. Mittal

Publisher: John Wiley & Sons

Published: 2014-09-18

Total Pages: 345

ISBN-13: 1118831640

DOWNLOAD EBOOK

The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.

Laser and Electron Beam Processing of Materials
Laser and Electron Beam Processing of Materials

Author: C.W. White

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 788

ISBN-13: 0323142532

DOWNLOAD EBOOK

Laser and Electron Beam Processing of Materials contains the papers presented at the symposium on "Laser and Electron Beam Processing of Materials," held in Cambridge, Massachusetts, in November 1979, sponsored by the Materials Research Society. The compilation presents reports and research papers on the use of directed energy sources, such as lasers and electron beams for materials processing. The majority of the materials presented emphasize results on semiconductor materials research. Substantial findings on research on metals, alloys, and other materials are presented as well. Topics covered by the papers include the use of scanned cw sources (both photons and electrons) to recrystallize amorphous layers, enhanced substitutional solubility, solute trapping, zone refining of impurities, and constitutional supercooling. The use of lasers and electron beams to anneal ion implant damage and contacts formation, processing of ion-implanted metals, and surface alloying of films deposited on metallic surfaces are also discussed. Metallurgists, engineers, and materials scientists will find the book very insightful.