[PDF] Full Steel Composite Structures Download eBook

Design of Steel-Concrete Composite Structures Using High-Strength Materials

Author: J.Y. Richard Liew

Publisher: Woodhead Publishing

Published: 2021-08-04

Total Pages: 256

ISBN-13: 0128234369

High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. - Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards - Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way - Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members - Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Analysis and Design of Steel and Composite Structures

Author: Qing Quan Liang

Publisher: CRC Press

Published: 2018-10-08

Total Pages: 459

ISBN-13: 1482266539

DOWNLOAD EBOOK

Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Composite Steel and Concrete Structures: Fundamental Behaviour (Second Edition)

Author: D.J. Oehlers

Publisher: Elsevier

Published: 2013-10-22

Total Pages: 588

ISBN-13: 1483287718

DOWNLOAD EBOOK

This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.

Modeling Steel and Composite Structures

Author: Pedro Vellasco

Publisher: Butterworth-Heinemann

Published: 2017-05-23

Total Pages: 470

ISBN-13: 0128135697

DOWNLOAD EBOOK

Modeling Steel and Composite Structures explains the computational tools, methods and procedures used to design steel and composite structures. The reference begins with the main models used to determine structural behavior. This is followed by a detailed description of experimental models and their main requirements and care. Numerous simulations presenting non-linear response are illustrated as are their restrictions in terms of boundary conditions, main difficulties, solution strategies and methods adopted to surpass convergence difficulties. In addition, examples of the use of computational intelligence methods to simulate steel and composite structures response are presented. - Includes numerical models based in the finite element method - Provides numerous simulations, presenting a non-linear response - Contains examples of the use of computational intelligence methods to simulate steel and composite structures

Composite Construction in Steel and Concrete VI

Author: Roberto T. Leon

Publisher: Amer Society of Civil Engineers

Published: 2011

Total Pages: 790

ISBN-13: 9780784411421

DOWNLOAD EBOOK

Proceedings of the sixth International Conference on Composite Construction in Steel and Concrete held at the Devil s Thumb Ranch in Tabernash, Colorado, July 20 24, 2008. Sponsored by Engineering Conferences International; the Structural Engineering Institute of ASCE. This collection contains the 63 technical papers representing the state-of-the-art in composite construction worldwide. Topics include: composite bridges, composite slabs, shear connectors, composite columns, innovative composite structural systems, fire and seismic resistance of composite structural systems and practical applications. These papers will be valuable to structural engineers and allied professionals engaged in construction with steel and concrete composites.

Steel and Composite Structures

Author: Y.C. Wang

Publisher: CRC Press

Published: 2003-09-02

Total Pages: 351

ISBN-13: 0203302249

DOWNLOAD EBOOK

Steel and Composite Structures: Behaviour and Design for Fire Safety presents a systematic and thorough description of the behaviour of steel and composite structures in fire, and shows how design methods are developed to quantify our understanding. Quantitative descriptions of fire behaviour, heat transfer in construction elements and structural analysis using numerical methods are all addressed and existing codes and standards for steel and composite fire safety design are critically examined. Using a comprehensive and systematic description of structural fire safety engineering principles, the author explains and illustrates the important difference between the behaviour of isolated structural elements and whole structures under fire conditions. This book is a vital source of information to structural and fire engineers. It will also be of considerable interest and value to students and researchers in this field.

Modern Trends in Research on Steel, Aluminium and Composite Structures

Author: Marian A. Giżejowski

Publisher: Routledge

Published: 2021-06-09

Total Pages: 689

ISBN-13: 1000459527

DOWNLOAD EBOOK

Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.

Elementary Behaviour of Composite Steel and Concrete Structural Members

Author: Deric J. Oehlers

Publisher: Elsevier

Published: 1999-09

Total Pages: 280

ISBN-13: 0750632690

DOWNLOAD EBOOK

Preface; Notation; Introduction; Sizing of Members; Elastic Analysis of Composite Beams; Rigid Plastic Analysis of Simply Supported Beams; Mechanical Shear Connectors; Transfer of Longitudinal Shear Forces; Stocky Columns; Slender Columns; Post-Cracking Dowel Strength; Rigid Plastic Analysis of Continuous Composite Beams; Lateral-Distortional Buckling; General Fatigue Analysis Procedures; Fatigue Analysis of Stud Shear Connectors; Index.