The book focuses on the challenges faced by urban areas in the context of handling waste in an environmentally and socially acceptable manner. It also discusses effective waste management approaches, which differ according to culture, climate, and socio-economic variables, as well as institutional volume. Presenting selected, high-quality papers from IconSWM 2018, the book explores a number of waste management methods with the help of case studies.
The book presents high-quality research papers from the Seventh International Conference on Solid Waste Management (IconSWM 2017), held at Professor Jayashankar Telangana State Agricultural University, Hyderabad on December 15–17, 2017. The conference, an official side event of the high-level Intergovernmental Eighth Regional 3R Forum in Asia and the Pacific, aimed to generate scientific inputs into the policy consultation of the Forum co-organized by the UNCRD/UNDESA, MoEFCC India, MOUD India and MOEJ, Japan. Presenting research on solid waste management from more than 30 countries, the book is divided into three volumes and addresses various issues related to innovation and implementation in sustainable waste management, segregation, collection, transportation of waste, treatment technology, policy and strategies, energy recovery, life cycle analysis, climate change, research and business opportunities.
Solid waste has grown into a relatively difficult problem to solve for those responsible for its management; these responsibilities include the collection, transport, treatment, and disposal of solid wastes, particularly wastes generated in medium and large urban centres. This problem is even more intense in economically developing countries, where the financial, human, and other critical resources are scarce in general. In the last decade, there has been a great interest and awareness regarding the environmentally safe management of waste worldwide, centralised in legislative, administrative, standardisation, and research activities in this field. Therefore, it is essential to develop short- and long-term waste management strategies (often named the 3Rs) and their consequent implementation in compliance with the formulated priorities for waste: (1) Reduce, (2) Recycle, (3) Reuse and (4) environmentally safe disposal. Several contradictions and lack of agreement still exist, even regarding the major basic definitions, e.g., which material should be treated as "waste" and which as a "beneficial raw material", which wastes are "hazardous" and which are "non-hazardous", etc. Quite often, different approaches and as a consequence, waste management/disposals are adopted for the same situation/materials. Environmental risk assessment procedures and mode of actions are varied greatly not only within national levels, but also at regional levels within the same country by different groups of scientists and/or policy makers. The general idea of the book has arisen from the mutual experience of many specialists in numerous disciplines from different countries involved in the problem of environmental assessment, economic and monitoring approaches, and control approaches for chemicals generated from solid waste disposal. Solid waste worldwide issues nowadays reflect the complexity and unbalanced development of our world at the beginning of the 21st century. This book covers a broad group of wastes, from biowaste to hazardous waste. The contributors to the book are recognised experts in the diverse fields associated with the issues of waste management and the reuse-recycle of materials, and are from different parts of the world. Authors present their experience and approaches considering both international and national/local specifics. The book is addressed to the wide range of end-users, decision-makers and professionals involved in environmental and agricultural issues: administration, designers, manufacturers, policy makers, farmers, researchers, academics and university students, and is focused on waste properties, environmental behaviour and management in an environmentally safe way. It was not the intention of the editor/authors to exhaust the subject, which is intensely broad, but to give a general idea with updating trends in the field of solid waste management concerning disposal, monitoring, assessment and remedial options, which are demonstrated also in case studies. The authors hope that this book to some extent will contribute to the trials and efforts for the proper, environmentally safe practices of solid waste disposal, and will provide state-of-the-art information and discussion, monitoring strategies, advanced approaches and methods, techniques and equipment for environmentally safe disposal and remediation of solid wastes.
Solid waste management issues, technologies and challenges are dynamic. More so, in developing and transitory nations in Asia. This book, written by Asian experts in solid waste management, explores the current situation in Asian countries including Pacific Islands. There are not many technical books of this kind, especially dedicated to this region of the world. The chapters form a comprehensive, coherent investigation in municipal solid waste (MSW) management, including, definitions used, generation, sustainable waste management system, legal framework and impacts on global warming. Several case studies from Asian nations are included to exemplify the real situation experienced. Discussions on MSW policy in these countries and their impacts on waste management and minimization (if any) are indeed an eye-opener. Undoubtedly, this book would be a pioneer in revealing the latest situation in the Asian region, which includes two of the world’s most dynamic nations in the economic growth. It is greatly envisaged to form an excellent source of reference in MSW management in Asia and Pacific Islands. This book will bridge the wide gap in available information between the developed and transitory/developing nations.
Managing solid waste is one of the major challenges in urbanization. A survey conducted in all 58 municipalities of Nepal in 2012 found that the average municipal solid waste generation was 317 grams per capita per day. This translates into 1,435 tons per day or 524,000 tons per year of municipal solid waste generation in Nepal. Many of these technically and financially constrained municipalities are still practicing roadside waste pickup from open piles and open dumping, creating major health risks.
Environmental Pollution and Public Health: Case Studies on Air, Water and Soil from an Interdisciplinary Perspective provides detailed case studies showing real-world applications of the latest technologies surrounding pollution in air, water and soil. Sections cover the environment and its nexus with public health, highlighting how the health of our environment can invariably influence our public health. Following this, atmospheric pollution is addressed, identifying various air pollutants, methods for identification, impacts on the environment and health, and mitigating technologies. Final sections are dedicated to liquid waste management, focusing on wastewater and treatment options including emerging technologies that are compared to existing options. The book finishes with case studies and information on regulatory frameworks for environmental pollution for those wanting to implement the remediation techniques covered. This is a necessary read for postgraduates, academics, professionals and researchers in environmental science, soil science, environmental health, and waste management who need the latest sustainable remediation practices and case studies and the efficacy of the associated techniques. - Offers a broad overview of the environmental and practical aspects of pollution, pollution control measures, and environmental impact assessment - Focuses on providing detailed, global case studies with an emphasis on cost, efficiency and sustainability of the techniques for treating wastewater, contaminated soils and solid waste - Provides theoretical and technical information that will assist professionals and practitioners in their goals to address current challenges stemming from environmental pollution
Solid Waste Management (SWM) is a matter of great concern in the urban areas of developing countries. The municipal authorities who are responsible for managing municipal solid waste are unable to discharge their obligations effectively because they lack the in-house capacity to handle the complexities of the process. It is heartening to see that the World Bank has prepared this book covering all important aspects of municipal SWM in great depth. The book covers very lucidly the present scenario of SWM in urban areas, the system deficiencies that exist, and the steps that need to be taken to correct SWM practices in compliance with Municipal Solid Waste (Management and Handling) Rules 2000 ratified by the Government of India. The book shares examples of best practices adopted in various parts of the country and abroad, and very appropriately covers the institutional, financial, social, and legal aspects of solid waste management, which are essential for sustainability of the system. It provides a good insight on how to involve the community, nongovernmental organizations, and the private sector to help improve the efficiency and cost effectiveness of the service, and shows how contracting mechanisms can be used to involve the private sector in SWM services. This book will be a very useful tool for city managers and various stakeholders who deal with municipal solid waste management in the design and execution of appropriate and cost-effective systems.
As global waste generation increases at a rapid rate, there is a dire need for waste management practices such as collection, disposal, and recycling to protect from environmental pollution. However, developing countries generate two to three times more waste, resort to open dumps more often than developed countries, and are slower to integrate waste management standards. There is a need for studies that examine the waste generation and practices of countries that share similar economic backgrounds as they strive to implement successful waste management techniques. Sustainable Waste Management Challenges in Developing Countries is an essential reference source that discusses the challenges and strategies of waste management practices and the unique waste issues faced by developing countries that prevent them from achieving the goal of integrated waste management. While highlighting topics including e-waste, transboundary movement, and consumption patterns, this book is ideally designed for policymakers, legislators, waste company managers, environmentalists, students, academicians, and municipal planners seeking current research on the global waste management problem.
Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.
