This book deals primarily with the basic concepts used in shock wave physics for measuring the equation of state of materials for high pressures. It provides considerably more detail in the development of the material than any competing book. The material on EOS modeling describes the basic physics models used and the form they take in hydrocodes. The models chosen are selected to show the wide variety of treatments. Written for teaching seminars, the book should benefit graduate students and interested physicists and engineers engaged in impact physics.
Huagn (formerly US Ballistic Research Laboratory, Aberdeen Proving Ground) presents a monograph on the fundamentals of shock wave phenomena and related equations of state. Shock waves in various environments are covered and special topics include shock tubes, hypervelocity impact, shaped-charge jet penetration, cosmic and isothermal shocks, and shock wave phenomenon in traffic jams.
Presenting some of the most recent results of Russian research into shock compression, as well as historical overviews of the Russian research programs into shock compression, this volume will provide Western researchers with many novel ideas and points of view. The chapters in this volume are written by leading Russian specialists various fields of high-pressure physics and form accounts of the main researches on the behavior of matter under shock-wave interaction. The experimental portions contain results of studies of shock compression of metals to high and ultra-high pressure, shock initiation of polymorphic transformations, strength, fracture and fragmentation under shock compression, and detonation of condensed explosives. There are also chapters on theoretical investigations of shock-wave compression and plasma states in regimes of high-pressure and high- temperature. The topics of the book are of interest to scientists and engineers concerned with questions of material behavior under impulsive loading and to the equation of state of matter. Application is to questions of high-speed impact, inner composition of planets, verification of model representations of material behavior under extreme 1oading conditions, syntheses of new materials, development of new technologies for material processing, etc. Russian research differs from much of the Western work in that it has traditionally been wider-ranging and more directed to extremes of response than to precise characterization of specific materials and effects. Western scientists could expect to benefit from the perspective gained from close knowledge of the Russian work.
This book is the first of several volumes on solids in the Shock Wave Science and Technology Reference Library. This is a unique collection, and the library as a whole sets out to comprehensively and authoritatively cover and review at research level the subject matter with all its ramifications. All the chapters are self-contained and can be read independently of each other, though they are of course thematically interrelated.
My intent in writing this book is to present an introduction to the thermo- chanical theory required to conduct research and pursue applications of shock physics in solid materials. Emphasis is on the range of moderate compression that can be produced by high-velocity impact or detonation of chemical exp- sives and in which elastoplastic responses are observed and simple equations of state are applicable. In the interest of simplicity, the presentation is restricted to plane waves producing uniaxial deformation. Although applications often - volve complex multidimensional deformation fields it is necessary to begin with the simpler case. This is also the most important case because it is the usual setting of experimental research. The presentation is also restricted to theories of material response that are simple enough to permit illustrative problems to be solved with minimal recourse to numerical analysis. The discussions are set in the context of established continuum-mechanical principles. I have endeavored to define the quantities encountered with some care and to provide equations in several convenient forms and in a way that lends itself to easy reference. Thermodynamic analysis plays an important role in continuum mechanics, and I have included a presentation of aspects of this subject that are particularly relevant to shock physics. The notation adopted is that conventional in expositions of modern continuum mechanics, insofar as possible, and variables are explained as they are encountered. Those experienced in shock physics may find some of the notation unconventional.
One of the main goals of investigations of shock-wave phenomena in condensed matter is to develop methods for predicting effects of explosions, high-velocity collisions, and other kinds of intense dynamic loading of materials and structures. Based on the results of international research conducted over the past 30 years, this book is addressed not only to experts in shock-wave physics, but also to interested representatives from adjacent fields of activity and to students who seek an introduction to the current issues.
This book introduces the core concepts of the shock wave physics of condensed matter, taking a continuum mechanics approach to examine liquids and isotropic solids. The text primarily focuses on one-dimensional uniaxial compression in order to show the key features of condensed matter’s response to shock wave loading. The first four chapters are specifically designed to quickly familiarize physical scientists and engineers with how shock waves interact with other shock waves or material boundaries, as well as to allow readers to better understand shock wave literature, use basic data analysis techniques, and design simple 1-D shock wave experiments. This is achieved by first presenting the steady one-dimensional strain conservation laws using shock wave impedance matching, which insures conservation of mass, momentum and energy. Here, the initial emphasis is on the meaning of shock wave and mass velocities in a laboratory coordinate system. An overview of basic experimental techniques for measuring pressure, shock velocity, mass velocity, compression and internal energy of steady 1-D shock waves is then presented. In the second part of the book, more advanced topics are progressively introduced: thermodynamic surfaces are used to describe equilibrium flow behavior, first-order Maxwell solid models are used to describe time-dependent flow behavior, descriptions of detonation shock waves in ideal and non-ideal explosives are provided, and lastly, a select group of current issues in shock wave physics are discussed in the final chapter.
Methods and the latest results of experimental studies of the strength properties, polymorphism and metastable states of materials and substances with extremely short durations of shock-wave action are presented. The author provides a comprehensive and theoretical description of specific features of the dynamics of elastoplastic shock compression waves in relaxing media. The presentation is preceded by a detailed description of the theoretical foundations of the method and a brief discussion of the basic methods of generating and diagnosing shock waves in solids. Key Selling Features: Addresses dynamic elastic-plastic response, spallation, and shock-induced phase transformation. Provides a centralized presentation of topics of interest to the shock physics community Presents new data on the mechanism and basic patterns of sub-microsecond polymorphic transformations and phase transitions. Investigates destruction waves in shock-compressed glasses. Analyzes the behavior of highly hard brittle materials under shock-wave loading and ways to diagnose fracture.
The book contains 12 chapters written by well-known shock wave researchers from seven different countries. Each researcher provides a brief description of his main research interests and results, thereby providing the readers with an excellent view of shock wave research conducted in the past fifty years. It also provides hints as to what still needs further investigation. It will be an excellent guide for young researchers entering the field of shock wave phenomena. Among the described investigations are the following topics: Blast wave interaction with a body when the body is in the area of interference of two blast waves moving in different directions; equation of state for water based on the shock Hugoniot data; Mach waves occurring over a backward facing edge in supersonic flow; shock waves in dusty gas; shock wave interaction with various bodies; three shock interactions.
This book presents, in a concise and comprehensive manner, the essential techniques by which shock wave physicists probe the boundaries of material response to impulsive loads. The author is a well-known figure in shock wave physics, having worked for over forty years with many of the outstanding researchers in the field.The book acquaints readers both with modern instrumentation techniques including interferometers such as the DISAR and the VISAR — and with methods that have been established by previous generations of experimentalists — including acoustic measurement techniques and low to moderate strain rate machines.Besides an exposition of the theoretical aspects of shock wave phenomena, it contains large amounts of data on equations of state, spallation thresholds, shock wave attenuation from very high pressures, and elastic constants. Much of this information has been previously unavailable in open publications.The text documents the transition from testing performed with explosives to the use of modern compressed gas guns, which permit much more detailed diagnostics and controlled conditions. In particular, the author pioneered the use of two-stage light gas guns which launch high-density plates against specimens located at the muzzle. The high launch velocity of these guns produced data that represents the highest pressures obtained in the free world at that time./a
