Scrap and Material Handlers
Author: American National Standards Institute
Publisher:
Published: 2007
Total Pages: 28
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author: American National Standards Institute
Publisher:
Published: 2007
Total Pages: 28
ISBN-13:
DOWNLOAD EBOOKAuthor: American Society of Mechanical Engineers
Publisher:
Published:
Total Pages: 44
ISBN-13: 9780791824771
DOWNLOAD EBOOKAuthor:
Publisher:
Published: 2003
Total Pages: 28
ISBN-13:
DOWNLOAD EBOOKAuthor: MTC1, Earthmoving Machinery
Publisher:
Published: 2019
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKThis SAE Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled material handlers, pedestal mounted material handlers and their equipment as defined in 3.1. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. (Material handlers share many design characteristics with hydraulic excavators and log loaders; primarily 360 degree continuous rotation of the upperstructure relative to the undercarriage or mounting. They differ in their operating application. Material handlers are used for the handling of scrap material and normally utilize grapples or magnets. Hydraulic excavators are used for the excavation of earth, gravel and other loose material utilizing a bucket. Log loaders are used for the handling of logs and trees and normally utilize grapples.) This document has been totally revised to bring it into alignment with the latest SAE format and update the references. Base machine and front operating dimensions have been added. The number of mountings has been reduced to reflect the three most common mountings.
Author: C. Twigge-Molecey
Publisher: Elsevier
Published: 2013-10-22
Total Pages: 238
ISBN-13: 1483287394
DOWNLOAD EBOOKThis book which describes the world of metallurgical processing is influenced by a variety of factors not directly metallurgical. One major factor in all applications is materials handling. In Pyro-metallurgical processes, the processes are interconnected by materials handling systems which often require a major percentage of plant cost. The systems include sampling, storage, weighing, feeding and transporting of materials which all actively affect the performance of the metallurgical processes. Increasing productivity and improvements to plant environment demand that materials handling be improved. At the same time, sophisticated sampling and control systems are required to optimize the recipes and allow controlled reactions. By using handling technologies that accommodate both the process and the environment, sustainable improvements can be made.
Author: MTC1, Earthmoving Machinery
Publisher:
Published: 2019
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKThis SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted. Paragraph 4.1.4 incompletely addresses the orientation and position of oscillating axles and did not address steering axles for lift capacity calculations.
Author: MTC C5, Excavators
Publisher:
Published: 2008
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKThis SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted. PurposeThe purpose of this SAE document is to establish a consistent, repeatable means of determining the lift capacity for the types of equipment contained therein. ApplicabilityLift capacity calculations and the resulting rated lift capacity chart are developed by the equipment manufacturer or the entity that assembles and or modifies basic components to produce the complete machine for each machine model that is produced.
Author: C. Hamling
Publisher:
Published: 1991
Total Pages: 12
ISBN-13:
DOWNLOAD EBOOKAuthor: Daniel Nerad
Publisher:
Published: 1993
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKAuthor: Roydon Vincent Wright
Publisher: New York : Simmons-Boardman Pub.
Published: 1921
Total Pages: 838
ISBN-13:
DOWNLOAD EBOOK