Sampling and Analysis Plan for Flammable Gases in Inactive Miscellaneous Underground Storage Tanks
Sampling and Analysis Plan for Flammable Gases in Inactive Miscellaneous Underground Storage Tanks

Author:

Publisher:

Published: 2000

Total Pages: 24

ISBN-13:

DOWNLOAD EBOOK

This sampling and analysis plan (SAP) identifies the field measurements for a screening of flammable gases in the vapor space of the inactive miscellaneous underground storage tanks (IMUSTs) currently assigned to the River Protection Project (RPP). If a measurement exceeds 25% of the lower flammability limit (LFL), vapor grab samples will be collected for laboratory analysis. This SAP also specifies the sample collection, laboratory analysis, quality assurance/quality control (QA/QC), and reporting objectives for grab sampling. Technical bases for the sampling objectives are provided in the Tank Safety Screening Data Quality Objectives (Dukelow et al 1995). The screening data will be used to determine if additional data are needed to support closure of a flammable gas unreviewed safety question for these facilities.

Sampling and Analysis Plan for Site Assessment During the Closure Or Replacement of Nonradioactive Underground Storage Tanks
Sampling and Analysis Plan for Site Assessment During the Closure Or Replacement of Nonradioactive Underground Storage Tanks

Author:

Publisher:

Published: 1990

Total Pages: 87

ISBN-13:

DOWNLOAD EBOOK

The Tank Management Program is responsible for closure or replacement of nonradioactive underground storage tanks throughout the Idaho National Engineering Laboratory (INEL). A Sampling and Analysis Plan (SAP) has been developed that complies with EPA regulations and with INEL Tank Removal Procedures for sampling activities associated with site assessment during these closure or replacement activities. The SAP will ensure that all data are valid, and it also will function as a Quality Assurance Project Plan. 18 refs., 8 figs., 11 tabs.

Tank 241-AP-102 Vapor Sampling and Analysis Plan
Tank 241-AP-102 Vapor Sampling and Analysis Plan

Author:

Publisher:

Published: 2001

Total Pages: 61

ISBN-13:

DOWNLOAD EBOOK

This tank sampling and analysis plan (SAP) identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples from the head space of tank 241-AP-102. Sampling will be performed in accordance with ''Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis'' (Air DQO) (Mulkey 1999). The sample results will verify if current air emission estimates used in the permit application are correct and provide information for future air permit applications. Samples taken in support of the DQO will consist of SUMMA{trademark} canisters, triple sorbent traps (TSTs), sorbent tube trains (STTs), polyurethane foam (PUF) samples, and particulate filters. Particulate filter samples and tritium traps will be taken for radiation screening to allow the release of the samples for analysis and for analysis of specific radionuclides. The following sections provide the general methodology and procedures to be used in the preparation, retrieval, transport, analysis, and reporting of results from the vapor samples.

340 Representative Sampling Verification Tank Sampling and Analysis Plan
340 Representative Sampling Verification Tank Sampling and Analysis Plan

Author:

Publisher:

Published: 1996

Total Pages: 18

ISBN-13:

DOWNLOAD EBOOK

This Sampling and Analysis Plan contains requirements for characterizing the 340 vault tank 1. The objective of the sampling and characterization is to determine if the tank is homogeneous when agitated and which sampling method provides the most representative sample. A secondary objective is to collect and characterize solid samples.