This two-volume publication summarises the methodology for the long-term safety assessment of near surface radioactive waste disposal facilities, developed in the 'Improvement of Safety Assessment Methodologies' (ISAM) co-ordinated research project, as well as giving details of the application of the methodology to three hypothetical test cases.
The ISAM project involved the review and enhancement of post-closure safety assessment methodologies and tools for both existing and proposed near surface radioactive waste disposal facilities. The main objectives of the project were to: (a) provide a critical evaluation of the approaches and tools used in the post-closure safety assessment of proposed and existing near surface radioactive waste disposal facilities; (b) enhance the approaches and tools used; (c) build confidence in the approaches and tools used. In order to help achieve these objectives, the ISAM project paid particular attention to discussing, agreeing and setting down a safety assessment methodology. The ISAM project primarily focused on developing a consensus on the methodological aspects of safety assessment, but also gave considerable attention to illustrating the application of the methodology to three main types of disposal facilities (vault, RADON and borehole type disposal facilities).--Publisher description.
This Safety Guide provides recommendations on how to meet safety requirements on the disposal of radioactive waste. It is concerned with the disposal of solid radioactive waste by emplacement in designated facilities at or near the land surface. The Safety Guide provides guidance on the development, operation and closure of, and on the regulatory control of, near surface disposal facilities, which are suitable for the disposal of very low level waste and low level waste. The Safety Guide provides guidance on a range of disposal methods, including the emplacement of solid radioactive waste in earthen trenches, in above ground engineered structures, in engineered structures just below the ground surface and in rock caverns, silos and tunnels excavated at depths of up to a few tens of metres underground. It is intended for use primarily by those involved with policy development for, with the regulatory control of, and with the development and operation of near surface disposal facilities.
Geological Repository Systems for Safe Disposal of Spent Nuclear Fuels and Radioactive Waste, Second Edition, critically reviews state-of-the-art technologies and scientific methods relating to the implementation of the most effective approaches to the long-term, safe disposition of nuclear waste, also discussing regulatory developments and social engagement approaches as major themes. Chapters in Part One introduce the topic of geological disposal, providing an overview of near-surface, intermediate depth, and deep borehole disposal, spanning low-, medium- and high-level wastes. Part Two addresses the different types of repository systems – crystalline, clay, and salt, also discussing methods of site surveying and construction. The critical safety issue of engineered barrier systems is the focus of Part Three, with coverage ranging from nuclear waste canisters, to buffer and backfill materials. Lastly, Parts Four and Five focus on safety, security, and acceptability, concentrating on repository performance assessment, then radiation protection, environmental monitoring, and social engagement. Comprehensively revised, updated, and expanded with 25% new material on topics of current importance, this is the standard reference for all nuclear waste management and geological repository professionals and researchers. - Contains 25% more material on topics of current importance in this new, comprehensive edition - Fully updated coverage of both near-surface/intermediate depth, and deep borehole disposal in one convenient volume - Goes beyond the scientific and technical aspects of disposal to include the political, regulatory, and societal issues involved, all from an international perspective
Defines the site selection process and criteria for identifying suitable near surface disposal facilities. This guide provides guidelines for the siting process management and specifies the data needed to apply the relevant selection criteria. (Please note: this publication will be superseded by DS356)
The International Conference on Waste Management and the Environment is organised every two years by the Wessex Institute of Technology in collaboration with other institutions. This fifth conference follows the success of previous meetings held in C diz (2002), Rhodes (2004), Malta (2006) and Granada (2008). Waste Management is becoming one of the key problems of the modern world, an international issue that is intensified by the volume and complexity of domestic and industrial waste discarded by society. Unfortunately, many of the practices adopted in the past were aimed at short-term solutions without sufficient regard or knowledge for long-term implications on health, the environment or sustainability and this, in many cases, is leading to the need to take difficult and expensive remedial action. With our growing awareness of the detrimental environmental effects of current waste disposal, there is a significant onus of accountability for effective waste management. Better practice and safer solutions are required. Not only is there a need for more research on current disposal methods such as landfill, incineration, chemical and effluent treatment, but also on recycling, waste minimisation, clean technologies, waste monitoring, public and corporate awareness, and general education.
This report presents an integrated, stepwise approach for the development of near surface disposal facilities for low and intermediate level radioactive waste. The report is consistent with the current international requirements, principles, standards and guidance for the disposal of radioactive waste. The approach is designed to be flexible enough to be suitable for use in the various Member States, ranging from countries that have nuclear power plants to countries that have small inventories of radioactive waste from nuclear applications.
This edited book has been designed to serve as a natural resources engineering reference book as well as a supplemental textbook. This volume is part of the Handbook of Environmental Engineering series, an incredible collection of methodologies that study the effects of pollution and waste in their three basic forms: gas, solid, and liquid. It complements two other books in the series including Environmental and Natural Resources Engineering and Integrated Natural Resources Management that serve as a basis for advanced study or specialized investigation of the theory and analysis of various natural resources systems. This book covers the management of many waste sources including those from agricultural livestock, deep-wells, industries manufacturing dyes, and municipal solid waste incinerators. The purpose of this book is to thoroughly prepare the reader for understanding the sources, treatment and control methods of toxic wastes shown to have harmful effects on the environment. Chapters provide information on some of the most innovative and ground-breaking advances in waste characterization, control, treatment and management from a panel of esteemed experts.
This is the first in a series of three volumes of proceedings of the 23rd Pacific Basin Nuclear Conference (PBNC 2022) which was held by Chinese Nuclear Society. As one in the most important and influential conference series of nuclear science and technology, the 23rd PBNC was held in Beijing and Chengdu, China in 2022 with the theme “Nuclear Innovation for Zero-carbon Future”. For taking solid steps toward the goals of achieving peak carbon emissions and carbon neutrality, future-oriented nuclear energy should be developed in an innovative way for meeting global energy demands and coordinating the deployment mechanism. It brought together outstanding nuclear scientists and technical experts, senior industry executives, senior government officials and international energy organization leaders from all across the world. The proceedings highlight the latest scientific, technological and industrial advances in Nuclear Safety and Security, Operations and Maintenance, New Builds, Waste Management, Spent Fuel, Decommissioning, Supply Capability and Quality Management, Fuel Cycles, Digital Reactor and New Technology, Innovative Reactors and New Applications, Irradiation Effects, Public Acceptance and Education, Economics, Medical and Biological Applications, and also the student program that intends to raise students’ awareness in fully engaging in this career and keep them updated on the current situation and future trends. These proceedings are not only a good summary of the new developments in the field, but also a useful guideline for the researchers, engineers and graduate students. This is an open access book.
