This review has been written as a practical guide to rubber injection moulding. Many injection moulding processes produce rejects or scrap, because they depend on a b257 of variables. To eliminate waste it is necessary to learn how to recognise the variables that cause problems, and then experiment to understand their interdependence. This can be developed to a fine art and lead towards 'right first time' processing, the commercial ideal. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Injection moulding of elastomers for mass produced products, such as those for the automotive industries, is a critical process for rubber product manufacturers. Proces sing equipment and materials are continuously under development for the application. This conference addressed the advances that have been made. The conference proceedings will be of importance to rubber processors, materials suppliers, compounders and end-users alike. The papers discuss developments that are currently available to optimise production from the injection moulding process along with new techniques, materials and equipment.
Annotation Injection moulding is one of the most commonly used processing technologies for plastics materials. Proper machine set up, part and mould design, and material selection can lead to high quality production. This review outlines common factors to check when preparing to injection mould components, so that costly mistakes can be avoided. This review examines the different types of surface defects that can be identified in plastics parts and looks at ways of solving these problems. Useful flow charts to illustrate possible ways forward are included. Case studies and a large b257 of figures make this a very useful report.
This review first discusses mould release and then addresses mould fouling. Significant material and process variables are considered first and then practical guidance on the selection of release agents and surface treatments are addressed. This is followed by advice on mould cleaning and the assessment of mould sticking and mould fouling. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
This revised 3rd edition details the factors involved in the injection moulding process, from material properties and selection to troubleshooting faults, and includes the equipment types currently in use and machine settings for different types of plastics. Since material flow is critical in moulding, the book covers rheology and viscosity. High temperature is also discussed as it can lead to poor quality mouldings due to material degradation.
There are few complete technical sources of information available for plastic injection moulders to use relating to automation. This review has been compiled by researching and analysing technical references. It is intended to describe the basics of the technology and to explain how to put the technology to use. The review is supplemented by an indexed section containing several hundred abstracts from the Polymer Library.
This Practical Guide to Injection Moulding is based on course material used by ARBURG in training operators of injection moulding machines. It comes from many years of experience in this field and has been edited by an expert injection moulder at Warwick University. It will be of use to experts looking to fill gaps in their knowledge base and to those new to the industry. The factors involved in injection moulding, from material properties and selection to troubleshooting faults, are all examined in this book. It covers the equipment types in use and machine settings for different types of plastics. Material flow is critical in moulding and there are sections covering rheology and viscosity. High temperature can lead to poor quality mouldings due to material degradation and this is discussed. There are an exceptional number of figures in this text, with many photographs of machinery and mouldings to illustrate key points. There are also numerous tables listing key properties and processing parameters. Flow charts are included in the chapter on troubleshooting to indicate what can be changed to resolve common problems. Injection moulding in the Western World is becoming increasingly competitive as the manufacturing base for many plastics materials has moved to the East. Thus Western manufacturers have moved into more technically difficult products and mouldings to provide more added value and maintain market share. Technology is becoming more critical, together with innovation and quality control. There is a chapter on advanced processing in injection moulding covering multi-material and assisted moulding technologies. This Guide will assist progress in developing good technical skills and appropriate processing techniques for the range of plastics and products in the marketplace.
Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.
In order to make the subject manageable the term 'injection moulding' has been restricted in its use so that only those processes which rely on thermal softening of the polymeric materials have been described and discussed in this book. It is intended to discuss the subject of reaction injection moulding in a separate book. However, even with this omission, the subject is still a very large one as nowadays many sorts or types of polymers are injection moulded. For example, it is estimated that one-third of all plastics materials are injection moulded-the range of products produced is enormous and increases daily. Because most moulding materials are based on plastics, in particular thermoplastics, the materials guides which form a large part of this book concentrate on the moulding of thermoplastics materials. Such guides should only be treated as general guidelines as each of the materials is normally available in a wide range of grades. These may differ in polymer molecular weight, molecular weight distribution, the additives used and their concentration, the physical form of the moulding compound, etc. A wide range of processing behaviours and end-use properties is therefore possible from any of the materials listed. This versatility is typified by the rubbery polymers which are compounded into an incredibly wide range of compounds. Because of this versatility only a very general guideline has been given for such materials.
