This book describes the prerequisites for the placing on the market and the safe use of machinery in compliance with the relevant EU Directives, especially the Machinery Directive 2006/42. It provides readers with high-level knowledge concerning the Essential Health and Safety Requirements (EHSR) that machinery must fulfill. The approach and principles of the Machinery Directive were most recently made worldwide acknowledged in the ILO code of practice on safe machinery, released in 2013. The book addresses that code, as well as providing valuable insight into other EU Product and Workplace legislation. Focusing on the key aspect of safe machinery, the “machinery safety risk assessment”, which allows readers to better understand the more difficult aspects of risk assessments, the book equips readers to tackle problems at the manufacturing stage and in different use scenarios, introducing them to risk reduction techniques and functional safety aspects.
Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. - Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards - Apply simple risk assessments and hazard design methods to your own projects - Identify hazards that occur with machinery and know how to deal with them
Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Offers guidance for employers and self employed people in assessing risks in the workplace. This book is suitable for firms in the commercial, service and light industrial sectors.
John Ridley and Dick Pearce, both recognized specialists in machinery safety, guide the reader through the various standards, regulations and best practices relating to the safe design and use of machinery and show which standard is relevant for which type of machine. Safety with Machinery provides a basic grounding in machinery safety and covers safeguarding philosophy and strategy, typical hazards, risk assessment and reduction, guarding techniques, ergonomic considerations, safe use of equipment and plant layout. All types of safeguards are discussed – mechanical, interlocking, electrical / electronic / programmable, hydraulic, pneumatic. The new edition has been updated throughout in line with changes in regulations and standards. The section on electric, electronic and programmable safety systems has been expanded to reflect their increasing importance. The book now focuses on the harmonised standards (e.g. EN ISO 13849, IEC/EN 61131-2) which can be used by manufacturers to self-certify their machines for the European market without the need for third party examination, but also covers other relevant standards (e.g. IEC 62061). Many practical examples set the regulations in context and assist in the interpretation of the various standards. Safety with Machinery is essential reading for all engineers involved in machinery design and maintenance all over the world as every machine sold within or into the EU needs to conform to the harmonised standards. It also provides health and safety professionals, students and employee representatives, as well as certification bodies, health and safety inspectors and safety regulators with a comprehensive overview of machinery safety.
The field of occupational health and safety constantly changes, especially as it pertains to biomedical research. New infectious hazards are of particular importance at nonhuman-primate facilities. For example, the discovery that B virus can be transmitted via a splash on a mucous membrane raises new concerns that must be addressed, as does the discovery of the Reston strain of Ebola virus in import quarantine facilities in the U.S. The risk of such infectious hazards is best managed through a flexible and comprehensive Occupational Health and Safety Program (OHSP) that can identify and mitigate potential hazards. Occupational Health and Safety in the Care and Use of Nonhuman Primates is intended as a reference for vivarium managers, veterinarians, researchers, safety professionals, and others who are involved in developing or implementing an OHSP that deals with nonhuman primates. The book lists the important features of an OHSP and provides the tools necessary for informed decision-making in developing an optimal program that meets all particular institutional needs.
This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant. This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments. * Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability * Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments * Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering
This document replaces the statement and proposals made in the discussion document Tolerability of Risk form Nuclear Power Stations published in 1988. It represents a revision of the earlier document in the light of comments received and of the discussion on the document during the Hinkley Point Inquiry and in the Inquiry report.
