This authoritative book gives you new perspective on the RF and analog hardware and systems design aspects of software defined radio. It delves into the architecture of transmitters and receivers that make software-defined radio a reality. Covering both the practical aspects and underpinnings of these architectures, the book details all key RF and analog baseband components and sub-systems, from the converters that interface with DSPs and ASICs through to the duplexer feeding the antenna. It enables you to select the right technique for any application by providing alternatives for implementing the main system components.
Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.
Understand the RF and Digital Signal Processing Principles Driving Software-defined Radios!Software-defined radio (SDR) technology is a configurable, low cost, and power efficient solution for multimode and multistandard wireless designs. This book describes software-defined radio concepts and design principles from the perspective of RF and digital signal processing as performed within this system. After an introductory overview of essential SDR concepts, this book examines signal modulation techniques, RF and digital system analysis and requirements, Nyquist and oversampled data conversion techniques, and multirate digital signal processing.. KEY TOPICS•Modulation techniquesMaster analog and digital modulation schemes•RF system-design parametersExamine noise and link budget analysis and Non-linear signal analysis and design methodology•Essentials of baseband and bandpass sampling and gain controlIF sampling architecture compared to traditional quadrature sampling, Nyquist zones, automatic gain control, and filtering•Nyquist sampling converter architecturesAnalysis and design of various Nyquist data converters•Oversampled data converter architecturesAnalysis and design of continuous-time and discrete-time Delta-Sigma converters•Multirate signal processing Gain knowledge of interpolation, decimation, and fractional data rate conversion*Offers readers a powerful set of analytical and design tools*Details real world designs*Comprehensive coverage makes this a must have in the RF/Wireless industry
Programming has become a significant part of connecting theoretical development and scientific application computation. Computer programs and processes that take into account the goals and needs of the user meet with the greatest success, so it behooves software engineers to consider the human element inherent in every line of code they write. Research Anthology on Recent Trends, Tools, and Implications of Computer Programming is a vital reference source that examines the latest scholarly material on trends, techniques, and uses of various programming applications and examines the benefits and challenges of these computational developments. Highlighting a range of topics such as coding standards, software engineering, and computer systems development, this multi-volume book is ideally designed for programmers, computer scientists, software developers, analysts, security experts, IoT software programmers, computer and software engineers, students, professionals, and researchers.
The availability of the RTL-SDR device for less than $20 brings software defined radio (SDR) to the home and work desktops of EE students, professional engineers and the maker community. The RTL-SDR can be used to acquire and sample RF (radio frequency) signals transmitted in the frequency range 25MHz to 1.75GHz, and the MATLAB and Simulink environment can be used to develop receivers using first principles DSP (digital signal processing) algorithms. Signals that the RTL-SDR hardware can receive include: FM radio, UHF band signals, ISM signals, GSM, 3G and LTE mobile radio, GPS and satellite signals, and any that the reader can (legally) transmit of course! In this book we introduce readers to SDR methods by viewing and analysing downconverted RF signals in the time and frequency domains, and then provide extensive DSP enabled SDR design exercises which the reader can learn from. The hands-on SDR design examples begin with simple AM and FM receivers, and move on to the more challenging aspects of PHY layer DSP, where receive filter chains, real-time channelisers, and advanced concepts such as carrier synchronisers, digital PLL designs and QPSK timing and phase synchronisers are implemented. In the book we will also show how the RTL-SDR can be used with SDR transmitters to develop complete communication systems, capable of transmitting payloads such as simple text strings, images and audio across the lab desktop.
This book explore the use of new technologies in the area of satellite navigation receivers. In order to construct a reconfigurable receiver with a wide range of applications, the authors discuss receiver architecture based on software-defined radio techniques. The presentation unfolds in a user-friendly style and goes from the basics to cutting-edge research. The book is aimed at applied mathematicians, electrical engineers, geodesists, and graduate students. It may be used as a textbook in various GPS technology and signal processing courses, or as a self-study reference for anyone working with satellite navigation receivers.
Software defined radio (SDR) is one of the most important topics of research, and indeed development, in the area of mobile and personal communications. SDR is viewed as an enabler of global roaming and as a unique platform for the rapid introduction of new services into existing live networks. It therefore promises mobile communication networks a major increase in flexibility and capability. SDR brings together two key technologies of the last decade - digital radio and downloadable software. It encompasses not only reconfiguration of the air interface parameters of handset and basestation products but also the whole mobile network, to facilitate the dynamic introduction of new functionality and mass-customised applications to the user's terminal, post-purchase. This edited book, contributed by internationally respected researchers and industry practitioners, describes the current technological status of radio frequency design, data conversion, reconfigurable signal processing hardware, and software issues at all levels of the protocol stack and network. The book provides a holistic treatment of SDR addressing the full breadth of relevant technologies - radio frequency design, signal processing and software - at all levels. As such it provides a solid grounding for a new generation of wireless engineers for whom radio design in future will assume dynamic flexibility as a given. In particular it explores * The unique demands of SDR upon the RF subsystem and their implications for front end design methodologies * The recent concepts of the 'digital front end' and 'parametrization' * The role and key influence of data conversion technologies and devices within software radio, essential to robust product design * The evolution of signal processing technologies, describing new architectural approaches * Requirements and options for software download * Advances in 'soft' protocols and 'on-the-fly' software reconfiguration * Management of terminal reconfiguration and its network implications * The concepts of the waveform description language The book also includes coverage of * Potential breakthrough technologies, such as superconducting RSFQ technology and the possible future role of MEMS in RF circuitry * Competing approaches, eg all-software radios implemented on commodity computing vs advanced processing architectures that dynamically optimise their configuration to match the algorithm requirements at a point in time The book opens with an introductory chapter by Stephen Blust, Chair of the ITU-R WP8F Committee and Chair of the SDR Forum presenting a framework for SDR, in terms of definitions, evolutionary perspectives, introductory timescales and regulation. Suitable for today's engineers, technical staff and researchers within the wireless industry, the book will also appeal to marketing and commercial managers who need to understand the basics and potential of the technology for future product development. Its balance of industrial and academic contributors also makes it suitable as a text for graduate and post-graduate courses aiming to prepare the next generation of wireless engineers.
With the proliferation of wireless networks, there is a need for more compact, low-cost, power efficient transmitters that are capable of supporting the various communication standards, including Bluetooth, WLAN, GSM/EDGE, WCDMA and 4G of 3GPP cellular. This book describes a novel idea of RF digital-to-analog converters (RFDAC) and demonstrates how they can realize all-digital, fully-integrated RF transmitters that support all the current multi-mode and multi-band communication standards. With this book the reader will: - Understand the challenges of realizing a universal CMOS RF transmitter - Recognize the design issues and the advantages and disadvantages related to analog and digital transmitter architectures - Master designing an RF transmitter from system level modeling techniques down to circuit designs and their related layout know-hows - Grasp digital polar and I/Q calibration techniques as well as the digital predistortion approaches - Learn how to generate appropriate digital I/Q baseband signals in order to apply them to the test chip and measure the RF-DAC performance. - Highlights the benefits and implementation challenges of software-defined transmitters using CMOS technology - Includes various types of analog and digital RF transmitter architectures for wireless applications - Presents an all-digital polar RFDAC transmitter architecture and describes in detail its implementation - Presents a new all-digital I/Q RFDAC transmitter architecture and its implementation - Provides comprehensive design techniques from system level to circuit level - Introduces several digital predistortion techniques which can be used in RF transmitters - Describes the entire flow of system modeling, circuit simulation, layout techniques and the measurement process
This is the first book to describe most of the issues involved in the transition from a single standard to a Software Radio based wireless terminal. The book is both a technology tutorial for beginners as well as a starting point for technical professionals in the communication and IC design industry who are approaching the design of a Software Defined Radio. A complete overview of the actual state-of-art for reconfigurable transceivers is given in detail.
Today’s wireless services have come a long way since the roll out of the conventional voice-centric cellular systems. The demand for wireless access in voice and high rate data multi-media applications has been increasing. New generation wireless communication systems are aimed at accommodating this demand through better resource management and improved transmission technologies. The interest in increasing Spectrum Access and improving Spectrum Efficiency combined with both the introduction of Software Defined Radios and the realization that machine learning can be applied to radios has created new intriguing possibilities for wireless radio researchers. This book is aimed to discuss the cognitive radio, software defined radio (SDR), and adaptive radio concepts from several aspects. Cognitive radio and cognitive networks will be investigated from a broad aspect of wireless communication system enhancement while giving special emphasis on better spectrum utilization. Applications of cognitive radio, SDR and cognitive radio architectures, spectrum efficiency and soft spectrum usage, adaptive wireless system design, measurements and awareness of various parameters including interference temperature and geo-location information are some of the important topics that will be covered in this book. Cognitive Radio, Software Defined Radio, and Adaptive Wireless Systems is intended to be both an introductory technology survey/tutorial for beginners and an advanced mathematical overview intended for technical professionals in the communications industry, technical managers, and researchers in both academia and industry.
