Reliability-based design is the only engineering methodology currently available which can ensure self-consistency in both physical and probabilistic terms. It is also uniquely compatible with the theoretical basis underlying other disciplines such as structural design. It is especially relevant as geotechnical design becomes subject to incre
This book contains probabilistic analyses and reliability-based designs (RBDs) for the enhancement of Eurocode 7 (EC7) and load and resistance factor design (LRFD) methods. An intuitive perspective and efficient computational procedure for the first-order reliability method (FORM, which includes the Hasofer–Lind reliability index) is explained, together with discussions on the similarities and differences between the design point of EC7/LRFD and RBD-via-FORM. Probability-based designs with respect to the ultimate and serviceability limit states are demonstrated for soil and rock engineering, including shallow and deep foundations, earth-retaining structures, soil slopes, 2D rock slopes with discontinuities, 3D rock slopes with wedge mechanisms, and underground rock excavations. Renowned cases in soil and rock engineering are analyzed both deterministically and probabilistically, and comparisons are made with other probabilistic methods. This book is ideal for practitioners, graduate students and researchers and all who want to deepen their understanding of geotechnical RBD accounting for uncertainty and overcome some limitations and potential pitfalls of the evolving LRFD and EC7. Solutions for the book’s examples are available online and are helpful to acquire a hands-on appreciation: https://www.routledge.com/9780367631390.
Establishes Geotechnical Reliability as Fundamentally Distinct from Structural Reliability Reliability-based design is relatively well established in structural design. Its use is less mature in geotechnical design, but there is a steady progression towards reliability-based design as seen in the inclusion of a new Annex D on "Reliability of Geotechnical Structures" in the third edition of ISO 2394. Reliability-based design can be viewed as a simplified form of risk-based design where different consequences of failure are implicitly covered by the adoption of different target reliability indices. Explicit risk management methodologies are required for large geotechnical systems where soil and loading conditions are too varied to be conveniently slotted into a few reliability classes (typically three) and an associated simple discrete tier of target reliability indices. Provides Realistic Practical Guidance Risk and Reliability in Geotechnical Engineering makes these reliability and risk methodologies more accessible to practitioners and researchers by presenting soil statistics which are necessary inputs, by explaining how calculations can be carried out using simple tools, and by presenting illustrative or actual examples showcasing the benefits and limitations of these methodologies. With contributions from a broad international group of authors, this text: Presents probabilistic models suited for soil parameters Provides easy-to-use Excel-based methods for reliability analysis Connects reliability analysis to design codes (including LRFD and Eurocode 7) Maximizes value of information using Bayesian updating Contains efficient reliability analysis methods Accessible To a Wide Audience Risk and Reliability in Geotechnical Engineering presents all the "need-to-know" information for a non-specialist to calculate and interpret the reliability index and risk of geotechnical structures in a realistic and robust way. It suits engineers, researchers, and students who are interested in the practical outcomes of reliability and risk analyses without going into the intricacies of the underlying mathematical theories.
The latest 4th edition of the international standard on the principles of reliability for load bearing structures (ISO2394:2015) includes a new Annex D dedicated to the reliability of geotechnical structures. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process. This book contains a wealth of data and information to assist geotechnical engineers with the implementation of semi-probabilistic or full probabilistic design approaches within the context of established geotechnical knowledge, principles, and experience. The introduction to the book presents an overview on how reliability can play a complementary role within prevailing norms in geotechnical practice to address situations where some measured data and/or past experience exist for limited site-specifi c data to be supplemented by both objective regional data and subjective judgment derived from comparable sites elsewhere. The principles of reliability as presented in ISO2394:2015 provides the common basis for harmonization of structural and geotechnical design. The balance of the chapters describes the uncertainty representation of geotechnical design parameters, the statistical characterization of multivariate geotechnical data and model factors, semi-probabilistic and direct probability-based design methods in accordance to the outline of Annex D. This book elaborates and reinforces the goal of Annex D to advance geotechnical reliability-based design with geotechnical needs at the forefront while complying with the general principles of reliability given by ISO2394:2015. It serves as a supplementary reference to Annex D and it is a must-read for designing geotechnical structures in compliance with ISO2394:2015.
Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modeling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems. The resulting engineering models are used to make probabilistic predictions, which are applied to geotechnical problems. Reliability & Statistics in Geotechnical Engineering comprehensively covers the subject of risk and reliability in both practical and research terms * Includes extensive use of case studies * Presents topics not covered elsewhere--spatial variability and stochastic properties of geological materials * No comparable texts available Practicing engineers will find this an essential resource as will graduates in geotechnical engineering programmes.
"Increasing demand on improving the resiliency of modern structures and infrastructure requires ever more critical and complex designs. Therefore, the need for accurate and efficient approaches to assess uncertainties in loads, geometry, material properties, manufacturing processes, and operational environments has increased significantly. Reliability-based techniques help develop more accurate initial guidance for robust design and help to identify the sources of significant uncertainty in structural systems. This book presents an overview of the methods of classical reliability analysis and design most associated with structural reliability. It also introduces more modern methods and advancements, and emphasizes the most useful methods and techniques used in reliability and risk studies, and elaborating their practical applications and limitations rather than detailed derivations. Features: provides a practical and comprehensive overview of reliability and risk analysis and design techniques. Introduces resilient and smart structures/infrastructure that will lead to more reliable and sustainable societies. Considers loss elimination, risk management and life-cycle asset management as related to infrastructure projects. Introduces probability theory, statistical methods, and reliability analysis methods. Reliability-Based Analysis and Design of Structures and Infrastructure is suitable for researchers and practicing engineers, as well as upper-level students taking related courses in structural reliability analysis and design"--
"The proposed work deals with the application of this powerful method to derive optimal design recommendations for large engineering systems under natural hazards. The three case studies illustrate to engineers and academic specialists how to strike a cost-effective balance in designing such systems"--
This publication contains the abstracts of 20 papers, the majority of which were presented at the International Workshop on Limit State Design in Geotechnical Engineering Practice (LSD2003). The complete contributions are available in the accompanying CD-ROM (special lecture not included). The topics covered include: performance-based and limit state design philosophies; issues arising from the implementation of limit state design codes; elaborations of OC measured valuesOCO, OC derived valuesOCO and OC characteristic valuesOCO; reliability-based methodologies for analytical calibration of partial factors; and application of partial factors in FEM where highly nonlinear force-deformation behaviors may govern."
