This proceedings volume contains papers presented at the Third Scientific Meeting of the IFIP Working Group on "Reliabilty and Optimization of Structural Systems". The contributions reflect recent developments in the field of modern structural systems optimization and reliability theory and point out directions for further research. Also perspectives for the education in this field were discussed.
This volume is an outcome of the 11th IFIP WG7.5 working conference on Reliability and Optimization of Structural Systems in Canada. The conference focuses on structural reliability methods and applications and engineering risk analysis and decision-making.
This volume contains 28 papers by renowned international experts on the latest advances in structural reliability methods and applications, engineering risk analysis and decision making, new optimization techniques and various applications in civil engineering. Moreover, several contributions focus on the assessment and optimization of existing str
This volume contains 28 papers including 4 keynote papers presented at the 10th IFIP WG7.5 Working Conference, focusing on the reliability and optimization of structural systems.
This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.
The need for a comprehensive book on probabilistic structural mechanics that brings together the many analytical and computational methods developed over the years and their applications in a wide spectrum of industries-from residential buildings to nuclear power plants, from bridges to pressure vessels, from steel structures to ceramic structures-became evident from the many discussions the editor had with practising engineers, researchers and professors. Because no single individual has the expertise to write a book with such a di.verse scope, a group of 39 authors from universities, research laboratories, and industries from six countries in three continents was invited to write 30 chapters covering the various aspects of probabilistic structural mechanics. The editor and the authors believe that this handbook will serve as a reference text to practicing engineers, teachers, students and researchers. It may also be used as a textbook for graduate-level courses in probabilistic structural mechanics. The editor wishes to thank the chapter authors for their contributions. This handbook would not have been a reality without their collaboration.
The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Over a period of several years the field of probabilistic mechanics and com putational mechanics have progressed vigorously, but independently. With the advent of powerful computational hardware and the development of novel mechanical techniques, the field of stochastic mechanics has progressed in such a manner that the inherent uncertainty of quite complicated systems can be addressed. The first International Conference on Computational Stochastic Mechanics was convened in Corfu in September 1991 in an ef fort to provide a forum for the exchanging of ideas on the current status of computational methods as applied to stochastic mechanics and for identi fying needs for further research. The Conference covered both theoretical techniques and practical applications. The Conference also celebrated the 60th anniversary of the birthday of Dr. Masanobu Shinozuka, the Sollenberger Professor of Civil Engineering at Princeton University, whose work has contributed in such a great measure to the development of Computational Stochastic Mechanics. A brief sum mary of his career and achievements are given in the Dedication. This book comprises some of the papers presented at the meeting and cov ers sections on Theoretical Reliability Analysis; Damage Analysis; Applied Reliability Analysis; Theoretical Random Vibrations; Stochastic Finite Ele ment Concept; Fatigue and Fracture; Monte Carlo Simulations; Earthquake Engineering Applications; Materials; Applied Random Vibrations; Applied Stochastic Finite Element Analysis, and Flow Related Applications and Chaotic Dynamics. The Editors hope that the book will be a valuable contribution to the grow ing literature covering the field of Computational Stochastic Mechanics.
For 60 years the International Federation for Information Processing (IFIP) has been advancing research in Information and Communication Technology (ICT). This book looks into both past experiences and future perspectives using the core of IFIP's competence, its Technical Committees (TCs) and Working Groups (WGs). Soon after IFIP was founded, it established TCs and related WGs to foster the exchange and development of the scientific and technical aspects of information processing. IFIP TCs are as diverse as the different aspects of information processing, but they share the following aims: To establish and maintain liaison with national and international organizations with allied interests and to foster cooperative action, collaborative research, and information exchange. To identify subjects and priorities for research, to stimulate theoretical work on fundamental issues, and to foster fundamental research which will underpin future development. To provide a forum for professionals with a view to promoting the study, collection, exchange, and dissemination of ideas, information, and research findings and thereby to promote the state of the art. To seek and use the most effective ways of disseminating information about IFIP’s work including the organization of conferences, workshops and symposia and the timely production of relevant publications. To have special regard for the needs of developing countries and to seek practicable ways of working with them. To encourage communication and to promote interaction between users, practitioners, and researchers. To foster interdisciplinary work and – in particular – to collaborate with other Technical Committees and Working Groups. The 17 contributions in this book describe the scientific, technical, and further work in TCs and WGs and in many cases also assess the future consequences of the work’s results. These contributions explore the developments of IFIP and the ICT profession now and over the next 60 years. The contributions are arranged per TC and conclude with the chapter on the IFIP code of ethics and conduct.
