This is the proceedings of the ERCOFTAC Workshop on Progress in Wall Turbulence: Understanding and Modelling, that was held in Lille, France from June 18 to 20, 2014. The workshop brought together world specialists of near wall turbulence and stimulated exchanges between them around up-to-date theories, experiments, simulations and numerical models. This book contains a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS and modeling with RANS, LES. The fact that both physical understanding and modeling by different approaches are addressed by the best specialists in a single workshop is original.
This book will consist of a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS, and modeling with RANS, LES and Low Order Dynamical Systems.
The Second European Turbulence Conference was held at the Technische Univer sitat Berlin, Federal Republic of Germany, from August 30th to September 2nd 1988 under the auspices of the European Mechanics Committee. It was primar ily devoted to fundamental aspects of turbulence, and aimed at bringing together engineers, physicists, and mathematicians. The scientific committee - serving also as Sub-committee of the European Turbulence Conference - consisted of the following members: G. Comte-Bellot (Lyon), H.-H. Fernholz and H.E. Fiedler (both from Berlin) as co-chairmen of the conference, U. Frisch (Nice), J.C.R. Hunt (Cambridge), E. Krause (Aachen), M. Landahl (Stockholm), A.M. Obukhov (Moscow), and G. Ooms (Amsterdam). The conference programme comprised 6 invited lectures and 94 contributions, presented either orally or at poster sessions. There were 165 participants from 18 countries. All papers published in these conference proceedings were, with the exception of the invited ones, again refereed by the members of the scientific committee. The main research topics discussed at this meeting were stability and gener ation of turbulence, effects of rotation, stratification and buoyancy forces, novel instrumentation, manipulation and control, boundary layers with separation and reattachment, computer simulation, turbulent diffusion, image analysis and flow visualization, vorticity dynamics and turbulence, and large-scale structures. We have taken the liberty of regrouping some papers following the submitted final versions for this volume. Authors may therefore find their paper under a different heading from that in the conference programme.
Wall turbulence control is a major subject, the investigation of which involves significant industrial, environmental and fundamental consequences. Wall Turbulence Control addresses recent advances achieved in active and passive wall turbulence control over the past two decades. This valuable reference for scientists, researchers and engineers provides an updated view of the research into this topic, including passive control, optimal and suboptimal control methodology, linear control and control using adaptive methods (neural networks), polymer and bubble injection, electromagnetic control and recent advances in control by plasma.
Advances in Turbulence VI presents an update on the state of turbulence research with some bias towards research in Europe, since it represents an almost complete collection of the paper presentations at the Sixth European Turbulence Conference, sponsored by EUROMECH, ERCOFTAC and COST, and held at the Swiss Federal Institute of Technology in Lausanne, July 2-5, 1996. The problem of transition, together with the structural description of turbulence, and the scaling laws of fully developed turbulence have continued to receive most attention by the research community and much progress has been made since the last European Turbulence Conference in 1994. The volume is thus geared towards specialists in the area of flow turbulence who could not attend the conference, as well as anybody who wishes quickly to assess the most active current research areas and the groups associated with them.
This volume collects the edited and reviewed contribution presented in the 7th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Theory II Wall bounded flows III Pipe flow IV Modelling V Experiments VII Miscellaneous topics
This volume collects the edited and reviewed contributions presented in the 8th iTi Conference on Turbulence, held in Bertinoro, Italy, in September 2018. In keeping with the spirit of the conference, the book was produced afterwards, so that the authors had the opportunity to incorporate comments and discussions raised during the event. The respective contributions, which address both fundamental and applied aspects of turbulence, have been structured according to the following main topics: I TheoryII Wall-bounded flowsIII Simulations and modellingIV ExperimentsV Miscellaneous topicsVI Wind energy/div
This volume collects the edited and reviewed contribution presented in the 9th iTi Conference that took place virtually, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Experiments II Simulations and Modelling III Data Processing and Scaling IV Theory V Miscellaneous topics
The European Turbulence Conferences have been organized under the auspices of the European Mechanics Committee (Euromech) to provide a forum for discussion and exchange of recent and new results in the field of turbulence. The first conference was organized in Lyon in 1986 with 152 participants. The second and third conferences were held in Berlin (1988) and Stockholm (1990) with 165 and 172 participants respectively. The fourth was organized in Delft from 30 June to 3 July 1992 by the J.M. Burgers Centre. There were 214 participants from 22 countries. This steadily growing number of participants demonstrates both the success and need for this type of conference. The main topics of the Fourth European Turbulence Conference were: Dynamical Systems and Transition; Statistical Physics and Turbulence; Experiments and Novel Experimental Techniques; Particles and Bubbles in Turbulence; Simulation Methods; Coherent Structures; Turbulence Modelling and Compressibility Effects. In addition a special session was held on the subject of CeBular Automata. Each of the sessions was introduced with a survey lecture. The lecturers were: W. Eckhaus, AJ. Libchaber, L. Katgerman, F. Durst, M. Lesieur, B. Legras, D.G. Dritschel and P. Bradshaw. The contributions of the participants were subdivided into oral and poster presentations. In addition to the normal program, some Speciai Interest Groups of Ercoftac (European Research Community on Flow, Turbulence and Combustion) presented their research activities in the form of a poster.
The European Drag Reduction Meeting has been held on 15th and 16th November 1990 in London. This was the fifth of the annual European meetings on drag reduction in engineering flows. The main objective of this meeting was to discuss up-to-date results of drag reduction research carried out in Europe. The organiser has adopted the philosophy of discussing the yesterday's results rather than the last year's results. No written material has therefore been requested for the meeting. It was only after the meeting the submission of papers was requested to the participants, from which 16 papers were selected for this proceedings volume. The meeting has attracted a record number of participants with a total of 52 researchers from seven European countries, U. K. , France, Germany, the Netherlands, Italy, Switzerland and U. S. S. R. as well as from Japan, Canada and Australia. The subjects covered in this proceedings volume include riblets, LEBUs (Large Eddy Break-Up device), surface roughness, compliant surfaces and polymer additives. Riblets seem to be one of the most extensively studied devices in the past years. Reflecting this situation in the European community, there are six papers on riblets covering their practical applications to aircraft and to a model ship, near-wall coherent structure of the boundary layer and effects of flow three-dimensionality. Possibility of heat-transfer enhancement with riblets and potential use in the laminar flow are also investigated. An analytical model is developed for the boundary-layer with a LEBU device.
