Assessing the Need for Personal Protective Equipment
Author:
Publisher:
Published: 1997
Total Pages: 60
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author:
Publisher:
Published: 1997
Total Pages: 60
ISBN-13:
DOWNLOAD EBOOKAuthor:
Publisher:
Published: 2023
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKAuthor: Wyoming. Workers' Safety and Compensation Division
Publisher:
Published: 1994
Total Pages: 7
ISBN-13:
DOWNLOAD EBOOKAuthor: U.S. Department of Labor
Publisher: CreateSpace
Published: 2014-03-12
Total Pages: 46
ISBN-13: 9781497317345
DOWNLOAD EBOOKHazards exist in every workplace in many different forms: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. The Occupational Safety and Health Administration (OSHA) requires that employers protect their employees from workplace hazards that can cause injury. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, OSHA recommends the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. For example, building a barrier between the hazard and the employees is an engineering control; changing the way in which employees perform their work is a work practice control. When engineering, work practice and administrative controls are not feasible or do not provide sufficient protection, employers must provide personal protective equipment (PPE) to their employees and ensure its use. Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This guide will help both employers and employees do the following: Understand the types of PPE; Know the basics of conducting a "hazard assessment" of the workplace; Select appropriate PPE for a variety of circumstances; Understand what kind of training is needed in the proper use and care of PPE.
Author: Institute of Medicine
Publisher: National Academies Press
Published: 2011-04-16
Total Pages: 166
ISBN-13: 0309158559
DOWNLOAD EBOOKWhen you purchase a product, you expect it to work. Construction workers on high-rise buildings need to be confident that their safety harnesses will arrest a fall. Firefighters need to know that their gloves and other protective equipment can withstand high temperatures. Healthcare workers administering highly toxic chemotherapy agents need to know that their gloves will withstand penetration. For personal protective technologies (PPT)-where the major purpose of the product is to protect the wearer against a hazard-a deficit in product effectiveness can mean injury, illness, or death. Examining the extent to which products meet specific performance or design criteria is the focus of conformity assessment efforts. For PPT conformity assessment, the ultimate goal is preventing worker illness, injury, or death from hazardous working conditions. Certifying Personal Protective Technologies focuses on conformity assessment for occupational PPT-ensuring that PPT are effective in preventing or reducing hazardous exposures or situations that workers face in their jobs. Because respirators already have an extensive testing and conformity assessment process in place, this book specifically addresses conformity assessment processes for other types of PPT, including eye and face protection, gloves, hearing protectors, and protective clothing.
Author: U. S. Labor
Publisher: CreateSpace
Published: 2012-06-25
Total Pages: 44
ISBN-13: 9781478129684
DOWNLOAD EBOOKOSHA 3151-12R, Personal Protection Equipment. Hazards exist in every workplace in many different forms: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. The Occupational Safety and Health Administration (OSHA) requires that employers protect their employees from workplace hazards that can cause injury. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, OSHA recommends the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. For example, building a barrier between the hazard and the employees is an engineering control; changing the way in which employees perform their work is a work practice control. When engineering, work practice and administrative controls are not feasible or do not provide sufficient protection, employers must provide personal protective equipment (PPE) to their employees and ensure its use. Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This guide will help both employers and employees do the following: Understand the types of PPE; Know the basics of conducting a "hazard assessment" of the workplace; Select appropriate PPE for a variety of circumstances; Understand what kind of training is needed in the proper use and care of PPE. The information in this guide is general in nature and does not address all workplace hazards or PPE requirements. The information, methods and procedures in this guide are based on the OSHA requirements for PPE as set forth in the Code of Federal Regulations (CFR) at 29 CFR 1910.132 (General requirements); 29 CFR 1910.133 (Eye and face protection); 29 CFR 1910.135 (Head protection); 29 CFR 1910.136 (Foot protection); 29 CFR 1910. 137 (Electrical protective equipment); 29 CFR 1910.138 (Hand protection); and regulations that cover the construction industry, at 29 CFR 1926.95 (Criteria for personal protective equipment); 29 CFR 1926.96 (Occupational foot protection); 29 CFR 1926.100 (Head protection); 29 CFR 1926.101 (Hearing protection); and 29 CFR 1926.102 (Eye and face protection); and for the maritime industry at 29 CFR 1915.152 (General requirements); 29 CFR 1915.153 (Eye and face protection); 29 DFR 1915.155 (Head protection); 29 CFR 1915.156 (Foot protection); and 29 CFR 1915.157 (Hand and body protection).
Author:
Publisher:
Published: 1994
Total Pages: 32
ISBN-13:
DOWNLOAD EBOOKAuthor:
Publisher:
Published: 2000
Total Pages: 58
ISBN-13:
DOWNLOAD EBOOKThe Occupational Safety and Health Administration (OSHA) requires employers to protect their employees from workplace hazards such as machines, work procedures, and hazardous substances that can cause injury. The preferred way to do this is through engineering controls or work practice and administrative controls, but when these controls are not feasible or do not provide sufficient protection, an alternative or supplementary method of protection is to provide workers with personal protective equipment (PPE) and the know-how to use it properly.
Author:
Publisher: HSE Books
Published: 2005
Total Pages: 136
ISBN-13: 9780717661640
DOWNLOAD EBOOKIntroduces a revised approach to the management and control of noise in the workplace. This book presents assessment and management of noise risks, practical advice on noise control, buying and hiring of quieter tools and machinery, selection and use of hearing protection and the development of health surveillance procedures.
Author: National Research Council
Publisher: National Academies Press
Published: 2008-10-25
Total Pages: 214
ISBN-13: 0309120187
DOWNLOAD EBOOKMaintaining the health and safety of workers in the United States and globally is accomplished in part by reducing hazardous exposures through the use of personal protective equipment. Personal protective technologies (PPT) include respirators worn by construction workers and miners; protective clothing, respirators, and gloves worn by firefighters and mine rescue workers; and respirators and protective clothing worn by healthcare workers. An estimated 5 million workers are required to wear respirators in 1.3 million U.S. workplaces. For some occupations, such as firefighting, the worker's protective equipment is the only form of protection against life-threatening hazards; for other workers, the PPT is a supplement to ventilation and other environmental, engineering, or administrative hazard controls. In the United States, federal responsibility for civilian worker PPT is integral to the mission of the National Institute for Occupational Safety and Health (NIOSH). This book examines the NIOSH Personal Protective Technology Program (PPT Program) and specifically focuses on the relevance and impact of this program in reducing hazardous exposures and improving worker health and safety.