Optimization of Urban Wastewater Systems using Model Based Design and Control
Optimization of Urban Wastewater Systems using Model Based Design and Control

Author: Carlos Alberto Velez Quintero

Publisher: CRC Press

Published: 2020-11-25

Total Pages: 250

ISBN-13: 1000116425

DOWNLOAD EBOOK

A considerable amount of scientific evidence has been collected leading to the conclusion that urban wastewater components should be designed as one integrated system, in order to protect the receiving waters cost-effectively. Moreover, there is a need to optimize the design and operation of the sewerage network and wastewater treatment plant (WwTP) considering the dynamic interactions between them and the receiving waters. This book introduces a method called Model Based Design and Control (MoDeCo) for the optimum design and control of urban wastewater components. The book presents a detailed description of the integration of modelling tools for the sewer, the wastewater treatment plants and the rivers. The complex modelling structure used for the integrated model challenge previous applications of integrated modelling approaches presented in scientific literature. The combination of modelling tools and multi-objective evolutionary algorithms demonstrated in this book represent an excellent tool for designers and managers of urban wastewater infrastructure. This book also presents two alternatives to solve the computing demand of the optimization of integrated systems in practical applications: the use of surrogate modelling tools and the use of cloud computer infrastructure for parallel computing.

Advancing Robust Multi-Objective Optimisation Applied to Complex Model-Based Water-Related Problems
Advancing Robust Multi-Objective Optimisation Applied to Complex Model-Based Water-Related Problems

Author: Oscar Osvaldo Marquez Calvo

Publisher: CRC Press

Published: 2020-02-07

Total Pages: 164

ISBN-13: 1000043142

DOWNLOAD EBOOK

The exercise of solving engineering problems that require optimisation procedures can be seriously affected by uncertain variables, resulting in potential underperforming solutions. Although this is a well-known problem, important knowledge gaps are still to be addressed. For example, concepts of robustness largely differ from study to study, robust solutions are generally provided with limited information about their uncertainty, and robust optimisation is difficult to apply as it is a computationally demanding task. The proposed research aims to address the mentioned challenges and focuses on robust optimisation of multiple objectives and multiple sources of probabilistically described uncertainty. This is done by the development of the Robust Optimisation and Probabilistic Analysis of Robustness algorithm (ROPAR), which integrates widely accepted robustness metrics into a single flexible framework. In this thesis, ROPAR is not only tested in benchmark functions, but also in engineering problems related to the water sector, in particular the design of urban drainage and water distribution systems. ROPAR allows for employing practically any existing multi-objective optimisation algorithm as its internal optimisation engine, which enables its applicability to other problems as well. Additionally, ROPAR can be straightforwardly parallelized, allowing for fast availability of results.

Optimization of Urban Wastewater Systems using Model Based Design and Control
Optimization of Urban Wastewater Systems using Model Based Design and Control

Author: Carlos Alberto Velez Quintero

Publisher: CRC Press

Published: 2020-11-25

Total Pages: 219

ISBN-13: 1000159329

DOWNLOAD EBOOK

A considerable amount of scientific evidence has been collected leading to the conclusion that urban wastewater components should be designed as one integrated system, in order to protect the receiving waters cost-effectively. Moreover, there is a need to optimize the design and operation of the sewerage network and wastewater treatment plant (WwTP) considering the dynamic interactions between them and the receiving waters. This book introduces a method called Model Based Design and Control (MoDeCo) for the optimum design and control of urban wastewater components. The book presents a detailed description of the integration of modelling tools for the sewer, the wastewater treatment plants and the rivers. The complex modelling structure used for the integrated model challenge previous applications of integrated modelling approaches presented in scientific literature. The combination of modelling tools and multi-objective evolutionary algorithms demonstrated in this book represent an excellent tool for designers and managers of urban wastewater infrastructure. This book also presents two alternatives to solve the computing demand of the optimization of integrated systems in practical applications: the use of surrogate modelling tools and the use of cloud computer infrastructure for parallel computing.

Urban Drainage Modeling
Urban Drainage Modeling

Author: Robert W. Brashear

Publisher:

Published: 2001

Total Pages: 970

ISBN-13:

DOWNLOAD EBOOK

This collection contains 91 papers presented at a specialty symposium on urban drainage modeling at the World Water and Environmental Resources Congress, held in Orlando, Florida, May 20-24, 2001.

Water-Wise Cities and Sustainable Water Systems
Water-Wise Cities and Sustainable Water Systems

Author: Xiaochang C. Wang

Publisher: IWA Publishing

Published: 2020-12-15

Total Pages: 400

ISBN-13: 9781789060751

DOWNLOAD EBOOK

Building water-wise cities is a pressing need nowadays in both developed and developing countries. This is mainly due to the limitation of the available water resources and aging infrastructure to meet the needs of adapting to social and environmental changes and for urban liveability. This is the first book to provide comprehensive insights into theoretical, systematic, and engineering aspects of water-wise cities with a broad coverage of global issues. The book aims to (1) provide a theoretical framework of water-wise cities and associated sustainable water systems including key concepts and principles, (2) provide a brand-new thinking on the design and management of sustainable urban water systems of various scales towards a paradigm shift under the resource and environmental constraints, and (3) provide a technological perspective with successful case studies of technology selection, integration, and optimization on the “fit-for-purpose” basis.

Modelling, Simulation and Control of Urban Wastewater Systems
Modelling, Simulation and Control of Urban Wastewater Systems

Author: Manfred Schütze

Publisher: Springer Science & Business Media

Published: 2011-06-27

Total Pages: 371

ISBN-13: 144710157X

DOWNLOAD EBOOK

by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.

Guidelines for Using Activated Sludge Models
Guidelines for Using Activated Sludge Models

Author: Leiv Rieger

Publisher: IWA Publishing

Published: 2012-09-14

Total Pages: 287

ISBN-13: 1843391740

DOWNLOAD EBOOK

Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Anaerobic Digestion Model No.1 (ADM1)
Anaerobic Digestion Model No.1 (ADM1)

Author: IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes

Publisher: IWA Publishing

Published: 2002-02-01

Total Pages: 61

ISBN-13: 1900222787

DOWNLOAD EBOOK

The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13