Operations Research Analysis in Test and Evaluation
Author: Donald L. Giadrosich
Publisher: AIAA
Published: 1995
Total Pages: 396
ISBN-13: 9781600860935
DOWNLOAD EBOOKRead and Download eBook Full
Author: Donald L. Giadrosich
Publisher: AIAA
Published: 1995
Total Pages: 396
ISBN-13: 9781600860935
DOWNLOAD EBOOKAuthor: National Research Council
Publisher: National Academies Press
Published: 1998-05-08
Total Pages: 240
ISBN-13: 0309174198
DOWNLOAD EBOOKFor every weapons system being developed, the U.S. Department of Defense (DOD) must make a critical decision: Should the system go forward to full-scale production? The answer to that question may involve not only tens of billions of dollars but also the nation's security and military capabilities. In the milestone process used by DOD to answer the basic acquisition question, one component near the end of the process is operational testing, to determine if a system meets the requirements for effectiveness and suitability in realistic battlefield settings. Problems discovered at this stage can cause significant production delays and can necessitate costly system redesign. This book examines the milestone process, as well as the DOD's entire approach to testing and evaluating defense systems. It brings to the topic of defense acquisition the application of scientific statistical principles and practices.
Author: National Research Council
Publisher: National Academies Press
Published: 2003-12-29
Total Pages: 228
ISBN-13: 0309166675
DOWNLOAD EBOOKThe U.S. Army Test and Evaluation Command (ATEC) is responsible for the operational testing and evaluation of Army systems in development. ATEC requested that the National Research Council form the Panel on Operational Test Design and Evaluation of the Interim Armored Vehicle (Stryker). The charge to this panel was to explore three issues concerning the IOT plans for the Stryker/SBCT. First, the panel was asked to examine the measures selected to assess the performance and effectiveness of the Stryker/SBCT in comparison both to requirements and to the baseline system. Second, the panel was asked to review the test design for the Stryker/SBCT initial operational test to see whether it is consistent with best practices. Third, the panel was asked to identify the advantages and disadvantages of techniques for combining operational test data with data from other sources and types of use. In a previous report (appended to the current report) the panel presented findings, conclusions, and recommendations pertaining to the first two issues: measures of performance and effectiveness, and test design. In the current report, the panel discusses techniques for combining information.
Author: National Research Council
Publisher: National Academies Press
Published: 1997-01-17
Total Pages: 240
ISBN-13: 0309175119
DOWNLOAD EBOOKThis book examines the human factors issues associated with the development, testing, and implementation of helmet-mounted display technology in the 21st Century Land Warrior System. Because the framework of analysis is soldier performance with the system in the full range of environments and missions, the book discusses both the military context and the characteristics of the infantry soldiers who will use the system. The major issues covered include the positive and negative effects of such a display on the local and global situation awareness of the individual soldier, an analysis of the visual and psychomotor factors associated with each design feature, design considerations for auditory displays, and physical sources of stress and the implications of the display for affecting the soldier's workload. The book proposes an innovative approach to research and testing based on a three-stage strategy that begins in the laboratory, moves to controlled field studies, and culminates in operational testing.
Author: Department Of Defense
Publisher: Independently Published
Published: 2019-03-06
Total Pages: 316
ISBN-13: 9781798930410
DOWNLOAD EBOOKThis PRINT REPLICA contains the 6th edition of the Test & Evaluation Management Guide (TEMG). The Test & Evaluation Management Guide is intended primarily for use in courses at DAU and secondarily as a generic desk reference for program and project management, and Test & Evaluation (T&E) personnel. It is written for current and potential acquisition management personnel and assumes some familiarity with basic terms, definitions, and processes as employed by the DoD acquisition process. The Test & Evaluation Management Guide is designed to assist Government and industry personnel in executing their management responsibilities relative to the T&E support of defense systems and facilitate learning during Defense Acquisition University coursework. The objective of a well-managed T&E program is to provide timely and accurate information to decision makers and program managers (PMs). The Test & Evaluation Management Guide was developed to assist the acquisition community in obtaining a better understanding of who the decision makers are and determining how and when to plan T&E events so that they are efficient and effective. Why buy a book you can download for free? We print this book so you don't have to. First you gotta find a good clean (legible) copy and make sure it's the latest version (not always easy). Some documents found on the web are missing some pages or the image quality is so poor, they are difficult to read. We look over each document carefully and replace poor quality images by going back to the original source document. We proof each document to make sure it's all there - including all changes. If you find a good copy, you could print it using a network printer you share with 100 other people (typically its either out of paper or toner). If it's just a 10-page document, no problem, but if it's 250-pages, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. It's much more cost-effective to just order the latest version from Amazon.com This book includes original commentary which is copyright material. Note that government documents are in the public domain. We print these large documents as a service so you don't have to. The books are compact, tightly-bound, full-size (8 1/2 by 11 inches), with large text and glossy covers. 4th Watch Publishing Co. is a HUBZONE SDVOSB. https: //usgovpub.com
Author: Robert E. McShea
Publisher: IET
Published: 2014-09-19
Total Pages: 1041
ISBN-13: 1613531761
DOWNLOAD EBOOKThis text and practical reference for all personnel involved in avionics and weapons system evaluation and testing, in the air and on the ground. Compiled from 25 years of experience and methods from the National Test Pilot School in Mojave, California, this book has been reviewed by a dozen voluntary experts from the military and industry to ensure all critical components are properly covered. It includes "war stories" from actual evaluations and exercises at the end of each chapter, providing instructors with the ability to reinforce critical concepts. This second edition has been updated and expanded by three chapters to include UAV technology, operational test and evaluation and night vision systems and helmet mounted displays and the chapter exercises have also been expanded and revised.
Author: David Gledhill
Publisher: Fonthill Media
Published: 2017-06-29
Total Pages: 397
ISBN-13:
DOWNLOAD EBOOKAuthor: Panel on Reliability Growth Methods for Defense Systems
Publisher: National Academy Press
Published: 2015-03-01
Total Pages: 235
ISBN-13: 9780309314749
DOWNLOAD EBOOKA high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.
Author:
Publisher: U.S. Government Printing Office
Published: 1997
Total Pages: 376
ISBN-13:
DOWNLOAD EBOOKAuthor: National Research Council
Publisher: National Academies Press
Published: 2004-01-29
Total Pages: 228
ISBN-13: 0309091020
DOWNLOAD EBOOKThe U.S. Army Test and Evaluation Command (ATEC) is responsible for the operational testing and evaluation of Army systems in development. ATEC requested that the National Research Council form the Panel on Operational Test Design and Evaluation of the Interim Armored Vehicle (Stryker). The charge to this panel was to explore three issues concerning the IOT plans for the Stryker/SBCT. First, the panel was asked to examine the measures selected to assess the performance and effectiveness of the Stryker/SBCT in comparison both to requirements and to the baseline system. Second, the panel was asked to review the test design for the Stryker/SBCT initial operational test to see whether it is consistent with best practices. Third, the panel was asked to identify the advantages and disadvantages of techniques for combining operational test data with data from other sources and types of use. In a previous report (appended to the current report) the panel presented findings, conclusions, and recommendations pertaining to the first two issues: measures of performance and effectiveness, and test design. In the current report, the panel discusses techniques for combining information.