This Safety Guide provides recommendations on the use of radioactive sources and radiation generators in well logging, including in the manufacture, calibration and maintenance of well logging tools. It provides recommendations on radiation protection and safety for the storage, use and transport of such radiation sources. The guidance in this publication is aimed primarily at operating organizations that are authorized to undertake well logging with radiation sources, as well as their employees and radiation protection officers. The guidance will also be of interest to regulatory bodies, and to designers, manufacturers, suppliers, and maintenance and servicing organizations of well logging equipment that contains radiation sources.
"This publication provides recommendations to a State for the nuclear security of nuclear or other radioactive material that has been reported as being out of regulatory control, as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. It includes recommendations for the detection and assessment of alarms and alerts and for a graded response to criminal or unauthorized acts with nuclear security implications involving nuclear or other radioactive material out of regulatory control. The recommended actions cover the confirmation of a credible threat, assessment and interdiction of an attempted act and response to a nuclear security event."--P. [4] of cover.
This publication identifies the fundamental safety objective and associated safety principles that underpin the IAEA's safety standards and its related safety programme. They provide the basis for requirements and measures for the protection of people and the environment against radiation risks, the safety of facilities and activities that give rise to radiation risks, including, in particular, nuclear installations and uses of radiation and radioactive sources, the transport of radioactive material and the management of radioactive waste.
Each State has the primary responsibility to build the capacity of organizations and people in order to develop, implement, and sustain a nuclear security regime. To discharge its responsibilities, the State has to strengthen its capacity at national, organizational and individual levels. Specifically, the State has to be able to enhance the competences and capabilities of relevant stakeholders in fulfilling their responsibilities within the nuclear security regime. Such endeavour involves various elements in capacity building, ranging from education and training to the development of a knowledge network. This publication is intended to serve as a reference document for Member States to develop a national capacity building strategy for nuclear security. It addresses all organizations involved in nuclear security and reflects the multidisciplinary and cross-institutional nature of this task, as well as the long term efforts that are required. .
This Safety Report has been developed as part of the IAEA programme on occupational radiation protection to provide for the application of its safety standards in implementing a graded approach to the protection of workers against exposures associated with uranium mining and processing. The publication describes the methods of production associated with the uranium industry and provides practical information on the radiological risks to workers in the exploration, mining and processing of uranium. It is a compilation of detailed information on uranium mining and processing stages and techniques, general radiation protection considerations in the relevant industry, general methodology applicable for control, monitoring and dose assessment, exposure pathways, and radiation protection programs for the range of commonly used mining and processing techniques.
On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
This book describes the four Nuclear Security Summits held over 2010-2016 at the initiative of U.S. President Barack Obama. The author draws upon his unique vantage point as a participant in the Summits, exclusive interviews with practitioners, and access to primary documents, to write an engaging history of the NSS and of nuclear security in general. The story of the NSS is also in part the story of multilateral nuclear forums, which have sprung up regularly since the dawn of the nuclear age to address perceived nuclear dangers. The success of these Summits in addressing the threat of nuclear terrorism holds important lessons for the design and work of nuclear forums today and into the future. The author presents a new approach to assessing ‘international learning’ that has important implications for the design of multilateral forums and updates the Cold War areas of nuclear knowledge being ‘learnt’ in the light of the NSS experience and other recent developments. This work will be of interest to scholars and practitioners in security studies, nuclear history, and International Relations.
This publication was developed from the exchange of information, experiences and practices by participating Member States at the IAEA Technical Meeting on the Safety and Security Interface Approaches and National Experiences, held in Vienna in 2018. It aims to provide a better understanding of the important elements of the interface between nuclear safety and nuclear security for facilities and activities and to highlight the challenges, opportunities and good practices for its effective management when planning and implementing different programmes and activities.
"Nuclear safety and nuclear security share the same goal: to protect individuals, the public and the environment from harmful effects of ionizing radiation. However, the activities that address nuclear safety and nuclear security are different, and actions taken to strengthen nuclear safety may affect nuclear safety and nuclear security positively or negatively, and vice versa. It is therefore essential to establish a well coordinated approach to managing the interface between nuclear safety and nuclear security so that relevant measures are implemented in a manner that aims to capitalize on opportunities that may be available for mutual enhancement without compromising either nuclear safety or nuclear security. The responsibility for nuclear safety and nuclear security within a State rests entirely with that State. In this context, the importance of international cooperation and the central role of the IAEA is widely recognized. The IAEA assists Member States in establishing or strengthening their nuclear safety infrastructure as well as their nuclear security infrastructure. In addition, it provides support to establish synergy between both infrastructures to ensure that actions taken in the two fields compliment rather than compromise each other. The interface between nuclear safety and nuclear security is highlighted in IAEA safety standards and nuclear security guidance. This publication was developed from the exchange of information, experiences and practices by participating Member States at the IAEA Technical Meeting on Safety and Security Interface -- Approaches and National Experiences, held in Vienna in 2018. The information presented in this publication summarizes the views expressed by the participants during the technical meeting; it is not a consensus report" --from the Foreword.
There is a growing societal awareness regarding the importance of regulatory systems for nuclear facilities and activities to have visible oversight of safety and security interfaces. This publication compiles relevant IAEA requirements, recommendations and guidance on identifying and addressing potential and actual interactions between nuclear safety and nuclear security systems and measures in nuclear power plants (NPPs). It also presents regulatory practices that are important to consider for nuclear safety and nuclear security, as they may reinforce or compromise the capacity of the regulatory bodies, competent authorities and operating organizations to meet nuclear safety and nuclear security requirements, including requirements relating to the interfaces between safety and security, during the application of regulatory functions in the various stages of the lifetime of an NPP.
