Nonlinear Kalman Filter for Multi-Sensor Navigation of Unmanned Aerial Vehicles covers state estimation development approaches for Mini-UAV. The book focuses on Kalman filtering technics for UAV design, proposing a new design methodology and case study related to inertial navigation systems for drones. Both simulation and real experiment results are presented, thus showing new and promising perspectives. - Gives a state estimation development approach for mini-UAVs - Explains Kalman filtering techniques - Introduce a new design method for unmanned aerial vehicles - Introduce cases relating to the inertial navigation system of drones
This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.
This book is a collection of 29 excellent works and comprised of three sections: task oriented approach, bio inspired approach, and modeling/design. In the first section, applications on formation, localization/mapping, and planning are introduced. The second section is on behavior-based approach by means of artificial intelligence techniques. The last section includes research articles on development of architectures and control systems.
This book includes papers from the section “Multisensor Information Fusion”, from Sensors between 2018 to 2019. It focuses on the latest research results of current multi-sensor fusion technologies and represents the latest research trends, including traditional information fusion technologies, estimation and filtering, and the latest research, artificial intelligence involving deep learning.
The field of mechatronics integrates modern engineering science and technologies with new ways of thinking, enhancing the design of products and manufacturing processes. This synergy enables the creation and evolution of new intelligent human-oriented machines. The Handbook of Research on Advancements in Robotics and Mechatronics presents new findings, practices, technological innovations, and theoretical perspectives on the the latest advancements in the field of mechanical engineering. This book is of great use to engineers and scientists, students, researchers, and practitioners looking to develop autonomous and smart products and systems for meeting todays challenges.
This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircrafts. It covers a wide range of topics, including but not limited to, intelligent computing communication and control; new methods of navigation, estimation and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation and control of miniature aircraft; and sensor systems for guidance, navigation and control etc. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.
The first three CEAS (Counsil of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011, in Delft, Netherlands in 2013 and in Toulouse, France in 2017. The Warsaw University of Technology (WUT) and the Rzeszow University of Technology (RzUT) accepted the challenge of jointly organizing the 4th edition. The conference aims to promote scientific and technical excellence in the fields of Guidance, Navigation and Control (GNC) in aerospace and other fields of technology. The Conference joins together the industry with the academia research. This book covers four main topics: Guidance and Control, Control Theory Application, Navigation, UAV Control and Dynamic. The papers included focus on the most advanced and actual topics in guidance, navigation and control research areas: · Control theory, analysis, and design · ; Novel navigation, estimation, and tracking methods · Aircraft, spacecraft, missile and UAV guidance, navigation, and control · Flight testing and experimental results · Intelligent control in aerospace applications · Aerospace robotics and unmanned/autonomous systems · Sensor systems for guidance, navigation and control · Guidance, navigation, and control concepts in air traffic control systems For the 4th CEAS Specialist Conference on Guidance, Navigation and Control the International Technical Committee established a formal review process. Each paper was reviewed in compliance with good journal practices by independent and anonymous reviewers. At the end of the review process papers were selected for publication in this book.
This text is a thorough treatment of the rapidly growing area of aerial manipulation. It details all the design steps required for the modeling and control of unmanned aerial vehicles (UAV) equipped with robotic manipulators. Starting with the physical basics of rigid-body kinematics, the book gives an in-depth presentation of local and global coordinates, together with the representation of orientation and motion in fixed- and moving-coordinate systems. Coverage of the kinematics and dynamics of unmanned aerial vehicles is developed in a succession of popular UAV configurations for multirotor systems. Such an arrangement, supported by frequent examples and end-of-chapter exercises, leads the reader from simple to more complex UAV configurations. Propulsion-system aerodynamics, essential in UAV design, is analyzed through blade-element and momentum theories, analysis which is followed by a description of drag and ground-aerodynamic effects. The central part of the book is dedicated to aerial-manipulator kinematics, dynamics, and control. Based on foundations laid in the opening chapters, this portion of the book is a structured presentation of Newton–Euler dynamic modeling that results in forward and backward equations in both fixed- and moving-coordinate systems. The Lagrange–Euler approach is applied to expand the model further, providing formalisms to model the variable moment of inertia later used to analyze the dynamics of aerial manipulators in contact with the environment. Using knowledge from sensor data, insights are presented into the ways in which linear, robust, and adaptive control techniques can be applied in aerial manipulation so as to tackle the real-world problems faced by scholars and engineers in the design and implementation of aerial robotics systems. The book is completed by path and trajectory planning with vision-based examples for tracking and manipulation.
In recent years, there has been growing interest in industrial systems, especially in robotic manipulators and mobile robot systems. As the cost of robots goes down and become more compact, the number of industrial applications of robotic systems increases. Moreover, there is need to design industrial systems with intelligence, autonomous decision making capabilities, and self-diagnosing properties. Intelligent Industrial Systems: Modeling, Automation and Adaptive Behavior analyzes current trends in industrial systems design, such as intelligent, industrial, and mobile robotics, complex electromechanical systems, fault diagnosis and avoidance of critical conditions, optimization, and adaptive behavior. This book discusses examples from major areas of research for engineers and researchers, providing an extensive background on robotics and industrial systems with intelligence, autonomy, and adaptive behavior giving emphasis to industrial systems design.
