Book "Superconductors - Properties, Technology, and Applications" gives an overview of major problems encountered in this field of study. Most of the material presented in this book is the result of authors' own research that has been carried out over a long period of time. A number of chapters thoroughly describe the fundamental electrical and structural properties of the superconductors as well as the methods researching those properties. The sourcebook comprehensively covers the advanced techniques and concepts of superconductivity. It's intended for a wide range of readers.
This book "Concepts of Semiconductor Photocatalysis" contains recent research on the preparation, characterization, and potential applications of the semiconductor photocatalyst. This research is promising and has received a lot of interest in the last few decades. The book covers advanced topics on the optical, physical, structural, and electro-catalysis and photo-catalysis applications. Development of new and noble efficient technology is pointing researchers toward the safe, facile, non-toxic, eco-friendly route of synthesis-to-applications, which can be used for manufacture at a large scale. This book presents an overview of the current photocatalyst fundamental theory, substantial applications, and use of the research worldwide. It is an important book for research organizations, government research-centers, academic libraries, and R
The field of material analysis has seen explosive growth during the past decades. Almost all the textbooks on materials analysis have a section devoted to the Fourier transform theory. For this reason, the book focuses on the material analysis based on Fourier transform theory. The book chapters are related to FTIR and the other methods used for analyzing different types of materials. It is hoped that this book will provide the background, reference and incentive to encourage further research and results in this area as well as provide tools for practical applications. It provides an applications-oriented approach to materials analysis written primarily for physicist, Chemists, Agriculturalists, Electrical Engineers, Mechanical Engineers, Signal Processing Engineers, and the Academic Researchers and for the Graduate Students who will also find it useful as a reference for their research activities.
In 1987 a major breakthrough occurred in materials science. A new family of materials was discovered that became superconducting above the temperature at which nitrogen gas liquifies, namely, 77 K or –196°C. Within months of the discovery, a wide variety of experimental techniques were brought to bear in order to measure the properties of these materials and to gain an understanding of why they superconduct at such high temperatures. Among the techniques used were electromagnetic absorption in both the normal and the superconducting states. The measurements enabled the determination of a wide variety of properties, and in some instances led to the observation of new effects not seen by other measu- ments, such as the existence of weak-link microwave absorption at low dc magnetic fields. The number of different properties and the degree of detail that can be obtained from magnetic field- and temperature-dependent studies of electromagnetic abso- tion are not widely appreciated. For example, these measurements can provide information on the band gap, critical fields, the H–T irreversibility line, the amount of trapped flux, and even information about the symmetry of the wave function of the Cooper pairs. It is possible to use low dc magnetic field-induced absorption of microwaves with derivative detection to verify the presence of superconductivity in a matter of minutes, and the measurements are often more straightforward than others. For example, they do not require the physical contact with the sample that is necessary when using four-probe resistivity to detect superconductivity.
Detailed coverage of all aspects of microwave superconductivity: fundamentals, fabrication, measurement, components, circuits, cryogenic packaging and market potential. Both a graduate-level textbook and a reference for microwave engineers. Applications (with either active or passive circuit elements) include those at both liquid-helium and liquid-nitrogen temperatures. Topics covered include wireless communications, space-based cryoelectronics, SQUIDs and SQUID amplifiers, NMR and MRI coils, accelerator cavities, and Josephson flux-flow devices.
These lectures are concerned with the application of high temperature superconductors to both passive and active high-frequency devices.The central issue addressed is the electrodynamics of granular superconductors, particularly where grain boundaries (either natural or synthetic) act as Josephson weak-links. Grain boundaries are responsible for residual dissipation and for unwanted dependence of the electromagnetic properties on ambient magnetic fields and on elevated power level. Properly controlled, similar weak-links are the key to high sensitivity dc and rf SQUIDS at readily accessible temperatures, and to modulators, mixers and detectors. Such structures may conveniently lead to superconductive electronic devices as well as coherent sources of radiation in the very far infrared.
In 1987 a major breakthrough occurred in materials science. A new family of materials was discovered that became superconducting above the temperature at which nitrogen gas liquifies, namely, 77 K or –196°C. Within months of the discovery, a wide variety of experimental techniques were brought to bear in order to measure the properties of these materials and to gain an understanding of why they superconduct at such high temperatures. Among the techniques used were electromagnetic absorption in both the normal and the superconducting states. The measurements enabled the determination of a wide variety of properties, and in some instances led to the observation of new effects not seen by other measu- ments, such as the existence of weak-link microwave absorption at low dc magnetic fields. The number of different properties and the degree of detail that can be obtained from magnetic field- and temperature-dependent studies of electromagnetic abso- tion are not widely appreciated. For example, these measurements can provide information on the band gap, critical fields, the H–T irreversibility line, the amount of trapped flux, and even information about the symmetry of the wave function of the Cooper pairs. It is possible to use low dc magnetic field-induced absorption of microwaves with derivative detection to verify the presence of superconductivity in a matter of minutes, and the measurements are often more straightforward than others. For example, they do not require the physical contact with the sample that is necessary when using four-probe resistivity to detect superconductivity.
Visualisation of Shubnikov Phase Using the High Resolution Faraday Effect; Mechanism of microwave Absorption and Flux Distribution in High Temperature Superconductors; Field Penetration and Magnetisation of Hts; Experimental Aspects of Megnetisation Studies in Superconductors; Recent Development of the Critical State Model; Anomalous Magnetisation in Ybacuo Single Crystals; Surface Barrier and Fish Tail; Low Field Magnetic Behaviour of High Temperature Superconductors; Irreversible Part of Magnetisation Due to Flux Pinning; Irreversibility Line in High Temperature Superconductors; Non-Linear Flux Flow Regime High-Temperature Superconductors.
This volume will focus on the theory and experiments leading to quantitative understanding of the magnetic field and temperature dependence of critical current densities in high-temperature superconductors. Topics will include: critical currents and flux-pinning, flux flow and flux creep, anisotropy of critical fields and currents, properties of the flux lattice and the irreversibility line, magnetization, granularity.
This volume is based on the proceedings of the NATO-sponsored Advanced Studies Institute (ASn on The New Superconducting Electronics (held 9-20 August 1992 in Waterville Valley, New Hampshire USA). The contents herein are intended to provide an update to an earlier volume on the same subject (based on a NATO ASI held in 1988). Four years seems a relatively short time interval, and our title itself, featuring The New Superconducting Electronics, may appear somewhat pretentious. Nevertheless, we feel strongly that the ASI fostered a timely reexamination of the technical progress and application potential of this rapid-paced field. There are, indeed, many new avenues for technological innovation which were not envisioned or considered possible four years ago. The greatest advances by far have occurred with regard to oxide superconductors, the so-called high transition-temperature superconductors, known in short as HTS. These advances are mainly in the ability to fabricate both (1) high-quality, relatively large-area films for microwave filters and (2) multilayer device structures, principally superconducting-normal-superconducting (SNS) Josephson junctions, for superconducting-quantum-interference-device (SQUID) magnetometers. Additionally, we have seen the invention and development of the flux-flow transistor, a planar three-terminal device. During the earlier ASI only the very first HTS films with adequate critical-current density had just been fabricated, and these were of limited area and had high resistance for microwave current.
