Non-exhaust emissions of particulate matter constitute a little-known but rising share of emissions from road traffic and have significant negative impacts on public health. This report synthesizes the current state of knowledge about the nature, causes, and consequences of non-exhaust particulate emissions. It also projects how particulate matter emissions from non-exhaust sources may evolve in future years and reflects on policy instrument mixes that can address this largely ignored environmental issue.
Non-Exhaust Emissions: An Urban Air Quality Problem for Public Health comprehensively summarizes the most recent research in the field, also giving guidance on research gaps and future needs to evaluate the health impact and possible remediation of non-exhaust particle emissions. With contributions from some of the major experts and stakeholders in air quality, this book comprehensively defines the state-of-the-art of current knowledge, gaps and future needs for a better understanding of particulate matter (PM) emissions, from non-exhaust sources of road traffic to improve public health. PM is a heterogeneous mix of chemical elements and sources, with road traffic being the major source in large cities. A significant part of these emissions come from non-exhaust processes, such as brake, tire, road wear, and road dust resuspension. While motor exhaust emissions have been successfully reduced by means of regulation, non-exhaust emissions are currently uncontrolled and their importance is destined to increase and become the dominant urban source of particle matter by 2020. Nevertheless, current knowledge on the non-exhaust emissions is still limited. This is an essential book to researchers and advanced students from a broad range of disciplines, such as public health, toxicology, atmospheric sciences, environmental sciences, atmospheric chemistry and physics, geochemistry, epidemiology, built environment, road and vehicle engineering, and city planning. In addition, European and local authorities responsible for air quality and those in the industrial sectors related to vehicle and brake manufacturing and technological remediation measures will also find the book valuable. - Acts as the first book to explore the health impacts of non-exhaust emissions - Authored by experts from several sectors, including academia, industry and policy - Gathers the relevant body of literature and information, defining the current knowledge, gaps and future needs
Non-exhaust emissions of particulate matter constitute a little-known but rising share of emissions from road traffic and have significant negative impacts on public health. This report synthesizes the current state of knowledge about the nature, causes, and consequences of non-exhaust particulate emissions. It also projects how particulate matter emissions from non-exhaust sources may evolve in future years and reflects on policy instrument mixes that can address this largely ignored environmental issue.
Recent advances in air pollution monitoring and modeling capabilities have made it possible to show that air pollution can be transported long distances and that adverse impacts of emitted pollutants cannot be confined to one country or even one continent. Pollutants from traffic, cooking stoves, and factories emitted half a world away can make the air we inhale today more hazardous for our health. The relative importance of this "imported" pollution is likely to increase, as emissions in developing countries grow, and air quality standards in industrial countries are tightened. Global Sources of Local Pollution examines the impact of the long-range transport of four key air pollutants (ozone, particulate matter, mercury, and persistent organic pollutants) on air quality and pollutant deposition in the United States. It also explores the environmental impacts of U.S. emissions on other parts of the world. The book recommends that the United States work with the international community to develop an integrated system for determining pollution sources and impacts and to design effective response strategies. This book will be useful to international, federal, state, and local policy makers responsible for understanding and managing air pollution and its impacts on human health and well-being.
This book discusses recent changes in the European legislation for exhaust emissions from motor vehicles. It starts with a comprehensive explanation of both the structure and range of applicability of new regulations, such as Euro 5 and Euro 6 for light-duty vehicles and Euro VI for heavy-duty vehicles. Then it introduces the most important issues in in-service conformity and conformity of production for vehicles, describing the latest procedures for performing exhaust emissions tests under both bench and operating conditions. Subsequently, it reports on portable emission measurement systems (PEMS) and their application for assessing the emissions of gaseous and particulate matter alike, under actual operating conditions and in all transport modes. Lastly, the book presents selected findings from exhaust emissions research on engines for a variety of transport vehicles, such as light-duty and heavy-duty vehicles, as well as non-road vehicles, which include farm tractors, groundwork and forest machinery, diesel locomotives, high-rail vehicles, combat vehicles and special-purpose vehicles. This work offers a valuable reference guide for researchers and professionals dealing with environmental regulations and vehicle manufacturing in the European Union.
The first concerns that come to mind in relation to pollution from road vehicles are direct emissions of carbon dioxide and toxic air pollutants. These are, of course, important but the impacts of road traffic are altogether more substantial. This volume of the Issues in Environmental Science and Technology Series takes a broader view of the effects on the environment and human health, excluding only injury due to road traffic accidents. By looking across the environmental media, air, water and soil, and taking account also of noise pollution, the volume addresses far more than the conventional atmospheric issues. More importantly, however, it examines present and future vehicle technologies, the implications of more extensive use of batteries in electric vehicles and the consequences of recycling vehicles at the end of use. Finally, examples of life-cycle analysis as applied to road vehicles are reviewed. This book is a comprehensive source of authoritative information for students studying pollution, and for policy-makers concerned with vehicle emissions and road traffic impacts more generally.
Traffic congestion increases travel times, but also results in higher energy usage and vehicular emissions. To evaluate the impact of traffic emissions on environment and human health, the accurate estimation of their rates and location is required. Traffic emission models can be used for estimating emissions, providing emission factors in grams per vehicle and kilometre. Emission factors are defined for specific traffic situations, and traffic data is necessary in order to determine these traffic situations along a traffic network. The required traffic data, which consists of average speed and flow, can be obtained either from traffic models or sensor measurements. In large urban areas, the collection of cross-sectional data from stationary sensors is a costefficient method of deriving traffic data for emission modelling. However, the traditional approaches of extrapolating this data in time and space may not accurately capture the variations of the traffic variables when congestion is high, affecting the emission estimation. Static transportation planning models, commonly used for the evaluation of infrastructure investments and policy changes, constitute an alternative efficient method of estimating the traffic data. Nevertheless, their static nature may result in an inaccurate estimation of dynamic traffic variables, such as the location of congestion, having a direct impact on emission estimation. Congestion is strongly correlated with increased emission rates, and since emissions have location specific effects, the location of congestion becomes a crucial aspect. Therefore, the derivation of traffic data for emission modelling usually relies on the simplified, traditional approaches. The aim of this thesis is to identify, quantify and finally reduce the potential errors that these traditional approaches introduce in an emission estimation analysis. According to our main findings, traditional approaches may be sufficient for analysing pollutants with global effects such as CO2, or for large-scale emission modelling applications such as emission inventories. However, for more temporally and spatially sensitive applications, such as dispersion and exposure modelling, a more detailed approach is needed. In case of cross-sectional measurements, we suggest and evaluate the use of a more detailed, but computationally more expensive, data extrapolation approach. Additionally, considering the inabilities of static models, we propose and evaluate the post-processing of their results, by applying quasi-dynamic network loading.
Transport systems are facing an impossible dilemma: satisfy an increasing demand for mobility of people and goods, while decreasing their fossil-energy requirements and preserving the environment. Additionally, transport has an opportunity to evolve in a changing world, with new services, technologies but also new requirements (fast delivery, reliability, improved accessibility). In this book, recent research works are reported around the triptych: "transport, energy and environment", which demonstrates that vehicle technologies and fuels can still improve, but it is necessary to prepare their implementation (e.g. electro-mobility), to think of new services, and to involve all actors, particularly enterprises, who will be the drivers of innovation. Mitigation strategies are studied to promote innovative, multimodal and clean transports and services. Research progress is reported on air pollution, vibrations and noise, their mitigation and assessment methodologies.
The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
