This guide is referred to in the 2013 edition of Approved Document L1A and the 2010 edition of Approved Document L1B (as amended in 2013) for dwellings as a source of guidance on complying with Building Regulations requirements for space heating and hot water systems, mechanical ventilation, comfort cooling, fixed internal and external lighting and renewable energy systems.
BUILDING CODES ILLUSTRATED STAY INFORMED OF THE LATEST UPDATES TO THE INTERNATIONAL BUILDING CODE WITH THE LEADING VISUAL REFERENCE In the newly revised Seventh Edition of Building Codes Illustrated: A Guide to Understanding the 2021 International Building Code®, architectural drawing expert Francis D.K. Ching and well known architect Steven R. Winkel deliver a beautifully illustrated and intuitively written handbook for the 2021 International Building Code (IBC). The authors provide brand new chapters on plumbing fixture counts, elevators, special construction, and existing buildings while updating the remainder of the material to align with recent changes to the IBC. Easy to navigate and perfect as a quick-reference guide to the IBC, Building Codes Illustrated is a valuable visual resource for emerging professionals. The book also includes: Thorough introductions to navigating the Code, use and occupancy, special uses and occupancies, and building heights and areas Full explorations of the types of construction, fire resistive construction, interior finishes, fire-protection systems, and means of egress Practical discussions of accessibility, interior environment, exterior walls, roof assemblies, and structural provisions In-depth examinations of special inspections and tests, soils and foundations, building materials and systems, and elevators Perfect for students of architecture, interior design, construction, and engineering, the latest edition of Building Codes Illustrated is also ideal for professionals in these fields seeking an up-to-date reference on the 2021 International Building Code.
This eighth edition of Hall and Greeno's leading textbook has been reviewed and updated in relation to the latest building and water regulations, new technology, and new legislation, and even more design calculations have been added. In addition, topics such as: alternative sources of natural energy, solar, ground source, heat pumps, renewable energy sources, geothermal methods, and wind power, are now covered. Building Services Handbook summarises the application of all common elements of building services practice, technique and procedure, to provide an essential information resource for students as well as practitioners working in building services, building management and the facilities administration and maintenance sectors of the construction industry. Information is presented in the highly illustrated and accessible style of the best-selling companion title Building Construction Handbook. THE comprehensive reference for all construction and building services students, Building Services Handbook is ideal for a wide range of courses including NVQ and BTEC National through Higher National Certificate and Diploma to Foundation and three-year Degree level. The clear illustrations and complementary references to industry Standards combine essential guidance with a resource base for further reading and development of specific topics.
This guide is referred to in the 2013 edition of Approved Document L2A and the 2010 edition of Approved Document L2B (as amended in 2013) for non-domestic buildings as a source of guidance on complying with Building Regulations requirements for space heating and hot water systems, mechanical ventilation, comfort cooling, fixed internal lighting and renewable energy systems.
This 'Non-Domestic Heating, Cooling and Ventilation Compliance Guide' provides guidance on the means of complying with the requirements of Part L for conventional space heating systems, hot water systems, cooling and ventilation systems in non-domestic buildings. Its sets out the minimum provisions for: efficiency of the plant that generates heat, hot water or cooling; controls to ensure that the system is not generating heat, hot water or cooling unnecessarily or excessively;other factors affecting the safety or energy efficiency of the system; insulation of pipes and ducts serving space heating, hot water and cooling systems; and acceptable specific fan power ratings for fans serving air distribution systems. The guide also provides a set of additional measures which may improve the efficiency of the plant: these are non-prescriptive may be either required or optional depending on the type of plant.
This illustrated guide provides basic reference on mechanical building services systems for construction clients and professionals in other areas of the construction industry. The systems covered are heating, ventilation, air conditioning and controls.
Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
This pocket book includes everyday information which the architect/designer has to find from a wide variety of sources. The book includes data about planning, structure, services, building elements, materials and useful addresses.
Equip your learners with the tools for success in a career as a plumber with this comprehensive and updated edition of our bestselling textbook, published in association with City & Guilds. The newly updated and fully revised second edition will help learners: - Study with confidence, covering all core content for the 6035, 9189 and 8202 specifications, as well as the 355 and 356 plumbing and heating T Level occupational specialisms. - Target their learning with detailed qualification mapping grids. - Get to grips with technical content presented in accessible language. - Enhance their understanding of plumbing practice with clear and accurate illustrations and diagrams demonstrating the technical skills they need to master. - Practise maths and English in context, with embedded 'Improve your maths' and 'Improve your English' activities. - Test their knowledge with end-of-chapter practice questions and practical tasks. - Prepare for the workplace with up-to-date information on relevant key regulations and industry standards. - Keep their knowledge current, with clear coverage of major modern cold water, hot water, central heating, sanitation, rainwater systems and environmental technologies.
