More Best Practices for Rotating Equipment follows Forsthoffer’s multi-volume Rotating Equipment Handbooks, addressing the latest best practices in industrial rotating machinery and also including a comprehensive treatment of the basics for reference. The author’s famous troubleshooting approach teaches the reader proven methodologies for installation, operation, and maintenance of equipment, and covers all phases of work with rotating equipment. Reliability optimization is also addressed for the first time. The book is ideal for engineers working in the design, installation, operation, and maintenance of power machinery. It is also an essential source of information for postgraduate students and researchers of mechanical and industrial engineering. Presents 200 new best practices for rotating equipment Offers an easy-to-use reference, with each chapter addressing a different type of equipment Covers all phases of work with rotating equipment, from pre-commissioning through maintenance
Forsthoffer summarizes, expands, and updates the content from previous books in a convenient all-in-one volume. This titles offers comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation, and maintenance of a wide array of rotating equipment.
Every operator who is responsible for monitoring critical rotating equipment will greatly benefit from this handy reference book. The goal of this book is to present proven techniques that will enable rookie and veteran operators alike to detect problems early and, we hope, eliminate major outages and/or maintenance costs. To achieve this goal we shall explain the basics of lubrication systems, bearings, drivers, seals and sealing systems, for centrifugal and positive displacement pumps as well as turbines, centrifugal compressors and reciprocating compressors. We will then present common sense inspection methods for centrifugal and positive displacement pumps, gear boxes, motors, heat exchangers, and turbines.
Design, Modeling, and Reliability in ROTATING MACHINERY This broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Rotating machinery represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, and other equipment, that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and other topics. The goal of the “Advances in Rotating Machinery” book series is to provide industry practitioners a time-savings means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series will cover industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more. This first volume begins the series by focusing on rotating machinery design assessments, modeling and analysis, and reliability improvement ideas. This broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Design, Modeling, and Reliability in Rotating Machinery covers, among many other topics: Rotordynamics and torsional vibration modeling Hydrodynamic bearing design theory and current practices Centrifugal and reciprocating compressor design and analysis Centrifugal pump design, selection, and monitoring General purpose steam turbine sizing
Forsthoffer's Component Conditioning Monitoring Handbook is dedicated to the condition monitoring of all rotating equipment. It describes the Forsthoffer Associates method of Component Condition Monitoring (CCM) and gives the reader detailed instructions on what to monitor for each component type. The author’s easy and approachable style makes this a very practical reference for any level of technical background. This represents the latest addition to a set that includes volumes on 1. Fundamentals of Rotating Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'. Contains separate chapters that address each of the 5 major components of all rotating machinery Covers what parameters must be monitored when action is required to prevent unplanned shutdown Describes how to use specific spreadsheets for condition monitoring tasks that can be downloaded from a companion website
Maintenance, Reliability and Troubleshooting in ROTATING MACHINERY This broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Rotating machinery represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, and other equipment, that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and other topics. The goal of the “Advances in Rotating Machinery” book series is to provide industry practitioners a time-savings means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series will cover industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more. Volume one began the series by focusing on design and analysis. Volume two continues the series by covering important machinery reliability concepts and offering practical reliability improvement ideas. Best-in-class production facilities require exceptional machinery reliability performance. In this volume, exceptional machinery reliability is defined as the ability of critical rotating machines to consistently perform as designed, without degradation or failure, until their next scheduled overhaul. Readers will find this volume chock-full of practical ideas they can use to improve the reliability and efficiency of their machinery. Maintenance, Reliability and Troubleshooting in Rotating Machinery covers, among many other topics: General machinery reliablity advice Understanding failure data Design audits and improvement ideas Maintenace best practices Analyzing failures
This book present the state of the art in Total Productive Maintainance (TPM) and its benefits. The authors present a survey applied to 368 manufacturing industries in order to determine their level of execution of TPM. Then a series of causal models are presented. For each model, the authors present a measure of the dependency between the critical success factors and the benefits obtained, allowing industry managers to differentiate between essential and non-essential activities. The content also allows students and academics to obtain a theoretical and empirical basis on the importance of TPM as a lean manufacturing tool in the context of industry 4.0.
ROTATING MACHINERY This third volume in a broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Rotating Machinery Fundamentals and Advances represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, etc., that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and others. The goal of the “Advances in Rotating Machinery” book series is to provide industry practicioners a time-saving means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series covers industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more. Readers will find a good mix of theory and sage experience throughout this book series. Whether for the veteran engineer, a new hire, technician, or other industry professional, this is a must-have for any library. This outstanding new vcolume includes: Machinery monitoring concepts and best practices Optimizing Lubrication and Lubricant Analysis Machinery troubleshooting Reliability improvement ideas Professional development advice
Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material 'from scratch'. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a 'wrong fit' and a costly reliability problem. Forsthoffer's Rotating Equipment Handbooks: Reliability Optimization through Component Condition Monitoring and Root Cause Analysis details the effective method of component condition monitoring for use as both a predictive maintenance and root cause analysis tool. It also details the major failure causes, the author's proven root cause analysis procedure with exercises and case histories, installation, pre-commissioning planning, functional testing and commissioning, preventive maintenance strategies and more. Forsthoffer's Rotating Equipment Handbooks: Reliability Optimization through Component Condition Monitoring and Root Cause Analysis is the last title in the five volume set. The volumes are: 1. Fundamentals of Rotaing Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'. Part of a five volume set which is the distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East A practical book written in a succinct style and well-illustrated throughout
ROTATING MACHINERY This third volume in a broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Rotating Machinery Fundamentals and Advances represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, etc., that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and others. The goal of the “Advances in Rotating Machinery” book series is to provide industry practicioners a time-saving means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series covers industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more. Readers will find a good mix of theory and sage experience throughout this book series. Whether for the veteran engineer, a new hire, technician, or other industry professional, this is a must-have for any library. This outstanding new vcolume includes: Machinery monitoring concepts and best practices Optimizing Lubrication and Lubricant Analysis Machinery troubleshooting Reliability improvement ideas Professional development advice
