Mixing of Vulcanisable Rubbers and Thermoplastic Elastomers
Mixing of Vulcanisable Rubbers and Thermoplastic Elastomers

Author: P. R. Wood

Publisher: iSmithers Rapra Publishing

Published: 2005

Total Pages: 142

ISBN-13: 9781859574966

DOWNLOAD EBOOK

This report describes the current state-of-the-art in mixing from a practical viewpoint. It begins by offering historical background against which the latest developments are set. It considers both batch and continuous systems, containing details of key developments by equipment manufacturers, with the different concepts discussed in layman's terms. This report also summarises the range of mixing techniques applied in the industry as well as methods for monitoring mixing quality both off- and on-line are also covered. Recent academic research in rubber mixing is briefly considered, providing an indication of possible future practical advances in this field. This review of rubber mixing is supported by an indexed section containing several hundred key references and abstracts selected from the Rapra Abstracts database.

Mixing in Single Screw Extrusion
Mixing in Single Screw Extrusion

Author: Martin Gale

Publisher: Smithers Rapra Technology

Published: 2009

Total Pages: 0

ISBN-13: 9781847351296

DOWNLOAD EBOOK

This handbook is a must-have practical guide to the subject of single-screw extrusion. Avoiding mathematical theory, except when absolutely necessary, this authoritative handbook empowers the reader to achieving good results with their plastic mixing. Mixing in Single Screw Extrusion will be a valuable resource to all involved in the art of plastic extrusion. --Book Jacket.

Screw Extrusion
Screw Extrusion

Author: James Lindsay White

Publisher:

Published: 2003

Total Pages: 444

ISBN-13: 9783446196247

DOWNLOAD EBOOK

Screw extruders are the most important of all polymer processing machines There is a need for a comprehensive book on this subject. This book emphazises the understanding of the underlaying principles of screw extrusion, the design and behavior of screw based machines. It helps the enineer t optimize his equipment and enhance production rates. Contents: · Introduction · Fundamentals · Screw Extrusion Technology · Technology of Single Screw Extrusion with Reciprocating Screws · Single Screw Extruder Analysis and Design · Twin and Multiscrew Extrusion

Extruder Principles and Operation
Extruder Principles and Operation

Author: M.J. Stevens

Publisher: Springer Science & Business Media

Published: 1995-10-31

Total Pages: 522

ISBN-13: 9780412635908

DOWNLOAD EBOOK

This book is intended to fill a gap between the theoretical studies and the practical experience of the processor in the extrusion of thermoplastic polymers. The former have provided a basis for numerical design of extruders and their components, but generally give scant attention to the practical performance, especially to the conflict between production rate and product quality. In practice extruders are frequently purchased to perform a range of duties; even so, the operator may have to use a machine designed for another purpose and not necessarily suitable for the polymer, process or product in hand. The operator's experience enables him to make good product in unpromising circumstances, but a large number of variables and interactions often give apparently contradictory results. The hope is that this book will provide a logical background, based on both theory and experience, which will help the industrial processor to obtain the best performance from his equipment, to recognize its limitations, and to face new problems with confidence. Mathematics is used only to the extent that it clarifies effects which cannot easily be expressed in words; ifit is passed over, at least a qualitative understanding should remain. The approximate theory will not satisfy the purist, but this seems to the authors less important than a clear representation of the physical mechanisms on which so much of the polymer processing industry depends. M. J. STEVENS J. A.

Extrusion
Extrusion

Author: Harold F. Giles Jr

Publisher: William Andrew

Published: 2013-09-21

Total Pages: 638

ISBN-13: 1437734820

DOWNLOAD EBOOK

The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques

Applied Plastics Engineering Handbook
Applied Plastics Engineering Handbook

Author: Myer Kutz

Publisher: William Andrew

Published: 2011-07-20

Total Pages: 661

ISBN-13: 1437735150

DOWNLOAD EBOOK

A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don’t teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb

Handbook of Thermoplastic Elastomers
Handbook of Thermoplastic Elastomers

Author: Jiri George Drobny

Publisher: Elsevier

Published: 2014-05-30

Total Pages: 465

ISBN-13: 0323221688

DOWNLOAD EBOOK

Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries

Twin-Screw Extruders
Twin-Screw Extruders

Author: Fabrizio G. Martelli

Publisher: Springer

Published: 1983

Total Pages: 162

ISBN-13:

DOWNLOAD EBOOK

Most books on plastics machinery include a preamble on the origin of such equipment, and some even discuss the origin of plastic itself, dating back to the early 1900s and such men as Leo Baekeland - the real founder of synthetic plastics. There seems therefore, little pur pose in reiterating what has been said before and going over the same ground so adequately covered in a number of books as well as the trade press. We are indebted to the author of this excellent treatise on twin-screw extruders for getting right down to the business at hand. The author makes mention of two pioneers - Roberto Colombo and Carlo Pasquetti - who were the first to develop twin-screw ex truders. It was my good fortune to follow the work of these pioneers, and, interestingly enough, the principles were so good that their work continues to be relevant even to the advanced and more sophisticated models so well defmed in this book.